Phase change analysis of an underwater glider propelled by the ocean＇s thermal energy

The phase change characteristic of the power source of an underwater glider propelled by the ocean＇s thermal energy is the key factor in glider attitude control. A numerical model has been established based on the enthalpy method to analyze the phase change heat transfer process under convective boundary conditions. Phase change is not an isothermal process, but one that occurs at a range of temperature. The total melting time of the material is very sensitive to the surrounding temperature. When the temperature of the surroundings decreases 8 degrees, the total melting time increases 1.8 times. But variations in surrounding temperature have little effect on the initial temperature of phase change, and the slope of the temperature time history curve remains the same. However, the temperature at which phase change is completed decreases significantly. Our research shows that the phase change process is also affected by container size, boundary conditions, and the power source＇s cross sectional area. Materials stored in 3 cylindrical containers with a diameter of 38ram needed the shortest phase change time. Our conclusions should be helpful in effective design of underwater glider power systems.     

机车柴油机喷油泵凸轮接触应力分析

针对机车柴油机喷油泵凸轮表面常出现点蚀、麻点、剥落等损伤问题,开展喷油泵凸轮轮廓升程段的接触应力研究,分析导致喷油泵凸轮表面失效的原因。以16V240ZJB型柴油机为例,通过对油泵凸轮轮廓曲线进行几何分析,导出凸轮升程段的运动方程。采用弹性力学中的赫兹理论,建立油泵凸轮接触应力的计算式,并通过计算机编程,从理论上计算和分析喷油泵凸轮表面的接触应力。理论计算结果表明:喷油泵凸轮的接触应力虽高达1 421.655 MPa,但并未超过许用应力值。因此建议从材料加工工艺方面查找原因,提高凸轮表面加工质量,并采用复合强化工艺,进一步加大喷油泵凸轮表面的强度。     

Prediction of thermal environment via revision of PMV index with body temperature

PMV （Predicted Mean Vote） is a widely used index for evaluating the thermal environment. However, few studies have been conducted to take physiological values directly as evaluating indices. This paper assumes a linear relation between body temperature and both sweating rate and heat produced by shivering, and introduces the linear relation into the human heat balance equation to revise the classic PMV. And the assumption of linear relation is subsequently proved. The revised PMV possesses the same characteristic of dependent heat load as that of the classic one, and moreover it is convenient to be calculated.     

高速公路交通管理系统用户满意度测评方法研究

高速公路交通管理系统用户满意度的测评研究对交通运输项目社会经济影响评价具有重要意义。利用计量经济学方法建立了基于交通运输信息的高速公路交通管理系统用户满意度指数模型,并对测评方法进行了研究。该方法为交通运输部门实时了解本系统运营质量水平提供了有效的参考依据。     

A capacity restraint transit assignment with elastic line frequency

This paper proposes a new formulation for the capacity restraint transit assignment problem with elastic line frequency, in which the line frequency is related to the passenger flows on transit lines. A stochastic user equilibrium transit assignment model with congestion and elastic line frequency is proposed and the equivalent mathematical programming problem is also formulated. Since the passenger waiting time and the line capacity are dependent on the line frequency, a fixed point problem with respect to the line frequency is devised accordingly. The existence of the fixed point problem has been proved. A solution algorithm for the proposed model is presented. Finally, a numerical example is used to illustrate the application of the proposed model and solution algorithm.     

贫混凝土基层材料变形性能的研究

通过室内试验，研究了贫混凝土道路基层材料的温度收缩和干燥收缩特性。试验结果为贫混凝土基层路面温度应力的计算提供了重要的参数，并对进一步研究贫混凝土基层干缩裂缝的防止具有重要的意义。     

半序F-型拓扑空间中一类算子方程的可解性

在引入-辅助序的F-型拓扑空间中,利用其相关性质,采用半序方法研究了一类算子方程Lx=Nx的可解性,证明了其解的存在性。     

连续刚构拱梁组合桥梁应力横向分布与温度应力分析

连续刚构拱梁组合桥梁,兼有连续刚构桥刚度大与拱桥跨越能力大的优点。以某连续刚构拱桥为研究对象,应用ANSYS软件建立起该桥的三维有限元模型,研究该桥箱梁应力的横向分布规律与全桥的温度应力。     

A link-node complementarity model and solution algorithm for dynamic user equilibria with exact flow propagations

In this paper, we propose a link-node complementarity model for the basic deterministic dynamic user equilibrium (DUE) problem with single-user-class and fixed demands. The model complements link-path formulations that have been widely studied for dynamic user equilibria. Under various dynamic network constraints, especially the exact flow propagation constraints, we show that the continuous-time dynamic user equilibrium problem can be formulated as an infinite dimensional mixed complementarity model. The continuous-time model can be further discretized as a finite dimensional non-linear complementarity problem (NCP). The proposed discrete-time model captures the exact flow propagation constraints that were usually approximated in previous studies. By associating link inflow at the beginning of a time interval to travel times at the end of the interval, the resulting discrete-time model is predictive rather than reactive. The solution existence and compactness condition for the proposed model is established under mild assumptions. The model is solved by an iterative algorithm with a relaxed NCP solved at each iteration. Numerical examples are provided to illustrate the proposed model and solution approach. We particularly show why predictive DUE is preferable to reactive DUE from an algorithmic perspective.     

高速机车制动温升对轴盘配合的影响

利用ANSYS建立了高速机车轴盘制动装置热量传递模型,计算了接触面热阻、间隙导热系数和表面传热系数,研究了其温度场分布特性,分析了制动生热对轴盘制动装置过盈配合的影响。计算结果表明:合理的制动盘和盘毂间隙能增大热阻,减小温度对过盈配合的影响,在结构允许范围内,建议合理的设计单边间隙为0.5~1.5mm;制动结束时刻,选择合理的盘毂厚度可使过盈面平均接触压力减小5.9%~6.6%,以降低温度对过盈配合的影响,建议盘毂合理厚度为8mm。