基于鲁棒性的空调自控系统设计

分析了空调自控系统的主要特性,并介绍了一种基于组合自校正控制策略的自适应控制算法,同时采取一些解决工程实际问题的辅助措施,以增强系统的抗干扰能力和对未建模动态、时变参数的鲁棒性.     

Liner ship route schedule design with port time windows

This paper examines a practical tactical liner ship route schedule design problem, which is the determination of the arrival and departure time at each port of call on the ship route. When designing the schedule, the availability of each port in a week, i.e., port time window, is incorporated. As a result, the designed schedule can be applied in practice without or with only minimum revisions. This problem is formulated as a mixed-integer nonlinear nonconvex optimization model. In view of the problem structure, an efficient holistic solution approach is proposed to obtain global optimal solution. The proposed solution method is applied to a trans-Atlantic ship route. The results demonstrate that the port time windows, port handling efficiency, bunker price and unit inventory cost all affect the total cost of a ship route, the optimal number of ships to deploy, and the optimal schedule.     

整体式桥台-H形钢桩-土相互作用低周往复拟静力试验（双语出版）

整体桥具有使用寿命长、施工方便、造价及养护费用低等特点，目前在国内外得到了广泛应用与推广。然而，整体桥在季节性温度荷载作用下会发生往复位移，并产生桥台-桩基-土相互作用。为此，以福建上坂大桥为背景，设计制作桥台-桩基结构试验模型，开展桥台-H形钢桩基-土相互作用低周往复荷载拟静力试验研究，主要研究桥台、桩基的滞回性能与变形规律以及桥台-桩基-土三者相互作用的机理。结果表明：桥台与桩基的等效黏滞阻尼比均较大，其值大于0.15，即整体桥具有良好的抗震性能和耗能能力；整体桥在温度作用下桩基处于弹性状态，但会发生残余变形，同时在台背与桩顶的一定宽度和深度范围内存在土体脱空现象，实际工程中产生桥头跳车、搭板沉降的原因不仅与台后土体的特性相关，还与桥台结构的受力机理相关；仅测量和分析上部未入土结构的变形并不能准确反映整体结构的变形规律；试验循环加载全过程桥台-桩基-土相互作用会产生累积变形，其中桩基的累积变形要大于桥台的累积变形，且其累积变形远大于任意单步荷载作用下产生的变形；目前对于现有桥台-桩基变形的理论并未考虑累积变形的影响，该研究结果可为有关规范的制订提供参考。     

大跨度空腹式连续刚构桥设计理论与方法

为寻求常规连续刚构桥适用跨径和斜拉桥适用跨径之间的合理、经济桥型,在常规连续刚构桥的基础上结合拱桥的力学特点提出空腹式连续刚构桥型。该桥型在常规连续刚构桥的形式上加大箱梁根部高度,并对箱梁根部的腹板进行挖空,减轻自重,形成梁-拱组合力学效应,从而提高结构承载效率,增强桥梁跨越能力。空腹式连续刚构桥可布置为单主跨、多主跨以及单T的形式,也可与常规连续刚构组合,桥墩可采用双肢薄壁墩或箱形柱式墩。采用正交试验法对该桥型关键结构参数进行研究,并根据实际工程对总体结构参数取值提出建议。该桥型采用平衡悬臂方法施工,工程造价指标、运营维护技术要求及费用与常规连续刚构桥相当,适用跨径在200~400 m,可望填补常规连续刚构桥适用跨径和斜拉桥适用跨径之间的空白。     

交叉口处现代有轨电车与其他机动车的平衡感应信号控制方法

介绍了现代有轨电车与机动车在交叉口的平衡感应信号控制方法,通过对现代有轨电车交叉口各入口排队车辆数的监测,实时改变信号配时,从而平衡各入口车辆排队长度;通过赋予现代有轨电车更高的排队权重,使现代有轨电车与同向机动车流减少停车时间,获得更多的通行时间,从而在保证其他机动车辆通行效率的同时,间接地实现现代有轨电车优先通行权。运用交通仿真软件对比分析各入口车辆平均排队长度、最大排队长度、总停车次数、平均延误与平均排队时长,确定各信号相位近似最优的最大感应绿灯信号时长。仿真结果表明,在排队长度与车辆延误方面,感应信号配时远优于定时信号配时;相比单纯的公共交通信号优先,感应信号控制更注重现代有轨电车和机动车每个乘客的通行权利。     

Measuring community reaction to urban transportation impacts using Von Neumann‐Morgenstern utility theory

This paper attempts to measure the impacts of urban transportation system improvements or changes on the community. The community's perceptions of the impacts are represented by its utilities (or disutilities) over various ranges of values of the multiple attributes representing these impacts. The utility technique used in the evaluation is based upon von Neumann‐Morgenstern (vN‐M, 1947) Utility Theory, and is applied using Raiffa's (1970) Fractile Method.

The paper specifically applies the technique to model the perceptions of five subgroups within a community to the impact of a new light rail transit system that is being incorporated in the transportation system of the City of Calgary.

Results of the modeling indicate explicitly how the community changes its perception over ranges of values of the attributes evaluated. Biases of various subgroups within the community over these attributes are also shown. Statistical tests indicate that aggregated utility perceptions can represent the utility perceptions of the individual subgroups quite reasonably.     

关于CASS工艺在设计过程中值得优化问题的探讨

循环式活性污泥法CASS工艺在设计过程中的经验参数较多,而规范中仅对部分参数的取值范围进行了限定,故不同设计人员的计算结果可能会有很大出入。该文结合该工艺目前在国内的使用情况,对该工艺的适用条件、部分关键参数的取值及设计过程中值得优化的问题进行了总结,以期在类似工程中可结合各工程自身特点予以应用。     

Railway wheel-flat and rail surface defect modelling and analysis by time–frequency techniques

Damage to the surface of railway wheels and rails commonly occurs in most railways. If not detected, it can result in the rapid deterioration and possible failure of rolling stock and infrastructure components causing higher maintenance costs. This paper presents an investigation into the modelling and simulation of wheel-flat and rail surface defects. A simplified mathematical model was developed and a series of experiments were carried out on a roller rig. The time–frequency analysis is a useful tool for identifying the content of a signal in the frequency domain without losing information about its time domain characteristics. Because of this, it is widely used for dynamic system analysis and condition monitoring and has been used in this paper for the detection of wheel flats and rail surface defects. Three commonly used time–frequency analysis techniques: Short-Time Fourier Transform, Wigner–Ville transform and wavelet transform were investigated in this work.     

国产内燃机车排气阀焊修后焊接过热区的脆化及使用寿命分析

本文采用焊接热模拟和时效热处理等方法处理试件,通过金相分析和性能试验,研究了内燃机车排气阀焊修后焊接过热区的脆化及其使用寿命问题.     

车市波动规律的新发展

为分析中国车市当前发展趋势，给汽车产销单位和领导机关决策提供参考，文章采用“车市波动分析法”，从宏观经济与车市波动关系入手，进行数据处理，作出车市波动图和数据表。分析研究后得出以下结论：中国车市2009年底已进入“第6次扩张高峰期”，达到创纪录的新水平，但后继波动恐难避免。文章根据中国车市发展实际提出波形组成内容变化新建议。