车速传感器试验台的系统开发

设计了ABS车速传感器试验台,分析设计结构及其车速传感器所采集的信号调理电路并与微机进行实时的通信,实时监测车速传感器的性能参数,开发了数据采集系统进行数据分析处理。研究表明该系统性能稳定,抗干扰能力强,为车速传感器测试提供了方便。     

HOWO系列车型起动系统原理及维修

起动系统是车辆重要的组成部分,以重汽HOWO车型为例,介绍重汽的EGR和高压共轨两种发动机系统．详细阐述近期车辆起动线路的更改,以及重汽HOWO车型起动系统故障的诊断方法。     

效率评定在客车标准作业时间制定中的应用

介绍效率评定的概念,阐述效率评定在客车标准作业时间制定实践中的应用。     

基于混合动态系统理论的简单混联式混合动力客车能量管理策略

分析简单混联式混合动力客车动力系统的结构;基于混合动态系统理论制定能量管理策略,并且通过仿真将该方案与原车进行比较.仿真结果表明,采用该方案的车辆动力性有所改善,燃油经济性有显著提高.     

时程分析法在大蒲春河特大桥主桥抗震验算中的应用

采用时程分析法对大蒲春河特大桥进行抗震分析,对主桥控制部位E1概率和E2概率地震作用下的响应进行验算,并利用验算结果指导该桥的抗震设计.     

长益常城际铁路速度目标值的选择

速度目标值是城际铁路设计时的核心指标,在选取时主要以适应客流需求、与区域其他交通运输方式相协调、与沿线社会经济发展相适应为原则,体现有利于吸引客流、减少工程投资和运营成本的效益最大化原则。速度目标值的选择主要通过本线客流特点、时间目标值的选择和具体多个速度目标值的比选得出。文中以长沙—益阳—常德速度目标值的选择为例,阐述铁路设计中客运专线速度目标值的选择方式和方法。     

Bus congestion, optimal infrastructure investment and the choice of a fare collection system in dedicated bus corridors

Microeconomic optimisation of scheduled public transport operations has traditionally focused on finding optimal values for the frequency of service, capacity of vehicles, number of lines and distance between stops. In addition, however, there exist other elements in the system that present a trade-off between the interests of users and operators that have not received attention in the literature, such as the optimal selection of a fare payment system and a designed running speed (i.e., the cruising speed that buses maintain in between two consecutive stops). Alternative fare payment methods (e.g., on-board and off-board, payment by cash, magnetic strip or smart card) have different boarding times and capital costs, with the more efficient systems such as a contactless smart card imposing higher amounts of capital investment. Based on empirical data from several Bus Rapid Transit systems around the world, we also find that there is a positive relationship between infrastructure cost per kilometre and commercial speed (including stops), achieved by the buses, which we further postulate as a linear relationship between infrastructure investment and running speed. Given this context, we develop a microeconomic model for the operation of a bus corridor that minimises total cost (users and operator) and has five decision variables: frequency, capacity of vehicles, station spacing, fare payment system and running speed, thus extending the traditional framework. Congestion, induced by bus frequency, plays an important role in the design of the system, as queues develop behind high demand bus stops when the frequency is high. We show that (i) an off-board fare payment system is the most cost effective in the majority of circumstances; (ii) bus congestion results in decreased frequency while fare and bus capacity increase, and (iii) the optimal running speed grows with the logarithm of demand.     

隧道开挖中的应力旋转和裂隙塑性变形问题研究

通过对隧道开挖过程进行三维数值模拟,分析了隧道开挖过程中主应力方向的旋转变化,研究了主应力旋转与隧道裂隙塑性变形的关系,验证了"考虑应力主轴旋转的广义塑性原理"的正确性,并将数值模拟结果和相关试验成果进行了对比,得出了一致性的结论。研究结果表明,应力旋转基本在隧道开挖前后10 m左右的距离内完成,隧道开挖过程中的应力旋转可以引起裂隙塑性变形的突变,且对竖向和斜向裂隙的影响较大;可以根据应力旋转的变化规律合理地选择支护时机,依据应力旋转对裂隙的影响对隧道的重点部位进行超前加固。     

Real time queue length estimation for signalized intersections using travel times from mobile sensors

We study how to estimate real time queue lengths at signalized intersections using intersection travel times collected from mobile traffic sensors. The estimation is based on the observation that critical pattern changes of intersection travel times or delays, such as the discontinuities (i.e., sudden and dramatic increases in travel times) and non-smoothness (i.e., changes of slopes of travel times), indicate signal timing or queue length changes. By detecting these critical points in intersection travel times or delays, the real time queue length can be re-constructed. We first introduce the concept of Queue Rear No-delay Arrival Time which is related to the non-smoothness of queuing delay patterns and queue length changes. We then show how measured intersection travel times from mobile sensors can be processed to generate sample vehicle queuing delays. Under the uniform arrival assumption, the queuing delays reduce linearly within a cycle. The delay pattern can be estimated by a linear fitting method using sample queuing delays. Queue Rear No-delay Arrival Time can then be obtained from the delay pattern, and be used to estimate the maximum and minimum queue lengths of a cycle, based on which the real-time queue length curve can also be constructed. The model and algorithm are tested in a field experiment and in simulation.     

基于多分辨率分析的区间类型2模糊系统

为了更有效地表达和处理系统的不确定性,提出了基于多分辨率分析的区间类型2(简称多分辨率区间类型2)模糊系统,构造了多分辨率区间类型2隶属度函数,并给出了基于尺度函数分解的结构和参数学习算法.多分辨率区间类型2模糊系统的前件是多分辨率隶属度函数,后件是输入的线性函数,因此系统可以自适应地划分输入论域空间,优化系统结构.将多分辨率区间类型2模糊系统应用于带有噪声的时间序列预测,预测结果的复杂度较小,均方根误差为0.105 2.