基于计算机视觉的驾驶员转向操作实时监测研究

为实时监控驾驶员操纵转向盘的状态，构建了基于机器视觉汽车转向盘实时监控系统，并运用阈值分割和边缘检测方法对转向盘图像中感兴趣区域进行了图像分割，提出了转向盘转角的计算公式。试验结果表明，感兴趣区域图像分割与转向盘转角监测方法有效。     

电喷汽油机可变进气系统的优化设计

利用发动机一维气体流动模拟程序，对某电喷汽油机进气系统的流动过程进行了模拟计算。对该汽油机采用的可变进气系统的歧管直径和长度、控制阀开关的切换转速等结构参数进行了优化设计。计算结果表明，与原机相比，经优化设计后系统的充气效率最大增加幅值大于11％，且改变了充气效率随转速的变化趋势。分析了配气正时对可变进气系统充气效率的影响。     

EQ 368汽油机配气机构的设计开发

为给东风汽车公司AF微型轿车及微型系列载货汽车提供适配动力,开展了EQ368发动机的开发研制工作。介绍了EQ368汽油机配气机构设计构思及总体布置方案,凸轮轴、气门弹簧等主要零件的结构特点,配气相位的设计,凸轮型线的设计。发动机整机性能、可靠性试验结果表明,该机构的设计达到了预期的效果。     

工程机械组群动态组织与集成管理系统研究

阐述了工程机械组群动态组织与集成管理系统的组成，特点和发展趋势，分析了系统的技术关键发及技术性能，确定了系统的构成方案，详细探讨了各功能单元的结合关系以及系统的社会，经济效益。     

信号控制对动态路线选择的影响研究

以动态路线选择模型为基础的先进的出行者信息系统（ＡＴＩＳ）的实施必然对城市交通控制系统产生影响，同时交通控制系统的控制方案对路线诱导信息“运行时间”的估计也发生作用，影响用户对最优路线的造选择。对两系统的相互关系进行了分析，并建立了两系统相互关系模型最后给出了实际案例分析。     

一种基于垂直字符边界特征的车牌定位方法

提出了一种基于垂直字符边界点特征的车牌定位方法，该方法能有效定位车牌，定位精度高达９８％，定位时间不超过２ｓ，并能有效地克服光线和天气条件等影响。     

温度和麻醉对神经几种兴奋性指标的影响——兼论何者可以正确反映兴奋性

在蟾蜍坐骨神经-腓神经观察了温度和麻醉对几种兴奋性指标的影响。结果表明,标准电量(a)随兴奋性的变化而有规律地变化。兴奋性愈高。a值愈小。而Weiss式中的b、基强度(Rh)、时值(Chr)及强度—时间曲线均不能正确反映兴奋性。细胞膜时间常数(RC)与兴奋性的变化无规律性联系。结论,a是兴奋性的可靠定量指标。     

Multi-step prediction of experienced travel times using agent-based modeling

This paper develops an agent-based modeling approach to predict multi-step ahead experienced travel times using real-time and historical spatiotemporal traffic data. At the microscopic level, each agent represents an expert in a decision-making system. Each expert predicts the travel time for each time interval according to experiences from a historical dataset. A set of agent interactions is developed to preserve agents that correspond to traffic patterns similar to the real-time measurements and replace invalid agents or agents associated with negligible weights with new agents. Consequently, the aggregation of each agent’s recommendation (predicted travel time with associated weight) provides a macroscopic level of output, namely the predicted travel time distribution. Probe vehicle data from a 95-mile freeway stretch along I-64 and I-264 are used to test different predictors. The results show that the agent-based modeling approach produces the least prediction error compared to other state-of-the-practice and state-of-the-art methods (instantaneous travel time, historical average and k-nearest neighbor), and maintains less than a 9% prediction error for trip departures up to 60 min into the future for a two-hour trip. Moreover, the confidence boundaries of the predicted travel times demonstrate that the proposed approach also provides high accuracy in predicting travel time confidence intervals. Finally, the proposed approach does not require offline training thus making it easily transferable to other locations and the fast algorithm computation allows the proposed approach to be implemented in real-time applications in Traffic Management Centers.     

Estimating travel time functions for urban roads: options and issues

Travel time functions specify the relationship between the travel time on a road and the volume of traffic on the road. Until recently, the parameters of travel time functions were rarely estimated in practice; however, a compelling case can be made for the empirical examination of these functions. This paper reviews, and qualitatively evaluates, a range of options for developing a set of travel time functions. A hierarchy of travel time functions is defined based on four levels of network detail: area, corridor, route and link. This hierarchy is illustrated by considering the development of travel time functions for Adelaide. Alternative sources of data for estimating travel time functions are identified.

In general, the costs and benefits increase as the travel time functions are estimated at finer levels of network detail. The costs of developing travel time functions include data acquisition costs and analysis costs. The benefits include the potential for reducing prediction errors, the degree of application flexibility and the policy sensitivity of the travel time functions.