西部公路发展策略研究

采用SWOT分析法作为西部公路发展策略的制定方法,在对西部公路交通系统的内外部环境影响因素归纳、剖析的基础上,给出了西部公路内外部环境分析与评价的方法,按重要性确定了西部公路发展环境的优势(S)与劣势(W)、机会(O)和威胁(T)因素,并采用定量与定性方法相结合提出了西部公路发展的建议策略,为西部公路发展在策略层面提供了理论指导。     

公路桥梁维修加固技术经济评价方法研究

在桥梁维修加固实施过程中,不可避免的涉及到其经济合理性问题,目前还未有较为成熟和系统的方法,对桥梁维修加固的经济合理性进行评价。本文结合桥梁维修加固涉及到的宏观和微观方面,提出了一种新的评价方法,用以判断桥梁维修加固的经济合理性。     

应用线弹性疲劳损伤理论的沥青路面轴载换算

应用疲劳损伤力学基本原理,探讨了适用于沥青路面轴载换算的新方法,并对该方法拟合的公式与规范按弯沉等效推荐的当量轴载换算公式进行了比较。计算结果表明在进行沥青路面轴载换算时,采用不同的等效换算原理,将导致非标准轴载与标准轴载当量换算系数上的不同,前者较后者大。这种差异一方面直接影响沥青路面的结构厚度设计,对设计年限内累计当量标准轴载作用次数的低估,必然导致沥青路面早期破损现象的发生;另一方面揭示弯沉等效表征的是路面结构的瞬间刚度性质,代替不了路面结构的长期疲劳强度特性。     

基于交易费用的物流运作模式研究

从交易费用理论及物流运作模式着手,探讨了市场采购、物流自营,物流外包与物流内包的适应环境及运作对象。即:对于一般的物流活动应该从市场上进行采购,对于集成化的物流服务应该采用外部外包,当第三方物流市场走向垄断时,要积极寻求物流内包。     

赣江大桥公路桥病害检测与安全评估

首先对赣江大桥公路桥进行病害调查,评定全桥各部位损伤状态。根据评定结果,再对材料退化、结构损伤与受力性能进行实桥测试。应用断裂力学方法,采用观测和超声波探测方法确定初始裂纹尺寸,通过裂纹扩展模拟得出临界杆件的剩余寿命。综合实测数据与理论分析,评估该桥使用安全性和剩余寿命,并建议维护加固措施。     

辽阳出口路现场热再生简析

重点介绍了辽阳出口路现场热再生沥青混合料的级配设计和施工工艺及施工过程中的质量控制要点。     

关于山区高速外业勘察中若干问题的探讨

近几年来,我国山区高速建设里程日益增加.因受复杂地形、地质条件的限制,山区高速的外业勘察具有其独有的关键技术难点,应在普通建设条件下的作业内容、作业方式的基础上,采取针对性的对策措施,确保外勘资料满足设计需求.     

A design method of tensile triangles and low transformation temperature weld metal for reduction of stress concentration and residual stress of welded joints

Stress concentration and residual stress have a significant influence on fatigue life of welded joints. In order to reduce the stress concentration of welded joints, a mathematical design method of tensile triangles (MTT) based on bionics was applied to weld shape design. Accordingly, the stress concentration of various weld beads in the corner boxing welded joint and the fillet welded T-joint was dissected using our in-house FEM software JWRIAN. It was found that there existed a large stress concentration in the conventional welded joints, whereas those welded joints with elongated weld bead were accompanied by a lower stress concentration, especially for elongated weld bead with MTT design. Furthermore, among the weld shapes of the corner boxing fillet welded joint, the rectangle shape of weld bead had the minimum stress concentration factor (1.05). For the fillet welded T-joint with MTT design, the stress concentration of weld toe decreased dramatically with the increase of the index of designed shape, but there was a minor difference of stress concentration at weld root between the weld beads with MTT design. In addition, application of low transformation temperature (LTT) weld metal utilizing martensitic transformation to the fillet welded T-joints can produce compressive residual stress at weld toe.     

Optimal bus fleet management strategy for emissions reduction

Transportation is a major cause for environmental degradation via exhaust emissions. For many transit-oriented metropolitan areas, bus trips often constitute a sizeable mode share. Managing the bus fleet, in particular updating buses to comply with the newer emissions standards, therefore, can have a substantial impact on transportation-induced air quality. This paper presents the approach of remaining life additional benefit–cost (RLABC) analysis for maximising the total net benefit by either early-retiring or retrofitting the current bus fleet within their lifespans. By referring to the net benefits for different bus types estimated by RLABC analysis, the most beneficial management scheme for the current bus fleet can be identified. Optimal bus fleet management (BFM) models based on the RLABC analysis for the operator and the government are developed. Then a government subsidy plan is produced to achieve win–win solutions, which will offer efficient and flexible management schemes. To illustrate the approach, the largest bus company in Hong Kong, which carries more than 23% of the total trips in Hong Kong, is taken as a case study example. Instead of adopting a fixed retirement plan, such as replacing buses at the age of 17 as is currently practised, the proposed method develops an optimal BFM scheme that progressively phases out buses or retrofits them. This study produces promising results to demonstrate the large benefit of this approach for optimal bus fleet management.     

深海超高压环境模拟容器裂纹评定

深海超高压环境模拟容器用于模拟水下压力环境,其容器壁上承受反复载荷,容易产生疲劳裂纹.疲劳裂纹扩展是影响其断裂的主要因素.本文旨在分析半椭圆裂纹在老化的深海超高压环境模拟容器中的扩展行为,评估容器的安全性,因此对材料20MnMoNb钢的裂纹扩展特性进行了试验研究,首先考虑三角形和梯形加载情况,通过比较两组实验结果,考察了其材料对保载时间的敏感性.采用基于统一的裂纹扩展率模型的三维有限元方法进行了疲劳裂纹扩展计算,并通过CT试样的一组数值和实验结果进行了验证,最后建立了不同初始尺寸、展弦比和倾角的裂纹有限元模型,并根据裂纹在容器内壁的容许深度准则,计算了容器的剩余寿命.其分析结果可为深海超高压环境模拟容器可靠性评估提供参考.