轨道安全监测中传感器优化配置研究

为了研究轨道结构安全监测中传感器的合理配置方法,确保城市轨道交通安全运营,通过建立桥上交叉渡线道岔模型和钢轨应变传递误差最小的目标函数,提出传感器测点选择依据和监测方案评价标准,保证监测方案的经济性、合理性。结论表明:模型数据曲线可以指导监测系统的测点位置选择;随着传感器测点数量增加,监测误差逐渐减小,但在误差比率的拐点后增加单位个数传感器带来的收益降低;通过建立误差最小准则的目标函数,结合误差指标可以评价和优化传感器布设方案;钢轨位移、附加力等指标的监测方案也可以通过本文方法确定。     

基于AIS网络的VTS信息智能推送应用研究

文中在通过利用智能手段采用AIS网络对航行计划、交通管制、水文气象等VTS相关信息进行推送的相关领域进行了研究,以便提高船舶信息获取效率,减少VTS服务工作强度。     

浅析汽车自动变速器故障检测与维修

自动变速器与手动变速器相比较,它所关联的知识面更加的广泛,机械的结构也更加的复杂,控制的原理也更加的有难度,所以在自动变速器故障检测以及维修的要求也会更高。自动变速器如若发生故障之后,需要专门的工具以及按照相关的程序进行检测维修,才能及时准确的找出故障问题,并且能够降低返修机率的发生。本文主要对汽车自动变速器的工作原理介绍,并且提出了相关的故障形成原因,最后也给出了排除故障以及维修方法。     

行星齿轮传动齿根动应力计算

针对功率分流行星齿轮传动齿轮重合度大,齿根应力计算工作量大的问题,对齿根动应力的计算问题进行了详细的研究。并以功率分流差动级太阳轮为例,对模型的建立方法、网格的划分方法、载荷的施加方法进行了详细的分析。利用Ansys中的APDL语言形成载荷文件,来控制在1个啮合周期内若干对接触线位置上载荷的施加。本文的计算方法可以精确、快速地得到1个齿在啮合过程中齿根的动应力。     

天然气输送用双抗型钢管的焊接工艺试验研究

为了研究影响双抗型钢管的抗氢诱导裂纹和抗硫化物应力腐蚀开裂的产生因素,对某双抗型钢管采用双V型坡口形式,通过不同线能量下手工电弧焊工艺施焊后,对焊接接头的力学性能、焊接裂纹性能、最高硬度、金相组织进行试验分析.采用美国腐蚀工程师协会的试验方法进行试验,发现钢管焊缝试样的硫化氢应力腐蚀裂纹大多沿着粒状贝氏体晶界和焊缝组织...     

长距离密闭输油管道的水击数值模拟

在长距离密闭输油管道中间泵站断电停运的情况下,采用特征线法对全线压力变化情况进行了数值模拟。结果表明:越是靠近下游的泵站停运后,越能更快地形成越站输送,出现进站压力小于泵吸入压力的时间越晚,管道的最大压力越大,管道出现液柱分离的机会越小等。     

Modeling traffic operation at signalized intersections without explicit left‐turn yielding rules with an enhanced cell transmission model

This paper presents an enhanced cell transmission model (CTM) to capture traffic operation at signalized intersections without explicit permissive left‐turn yielding rules (i.e. aggressive permissive left‐turn maneuvers may not necessarily yield to opposing through traffic), which can be widely observed in many developing countries. Different from previous studies that focus on traffic dynamics on approaching links, this study contributes to modeling traffic operations within the intersection. A novel cell transmission framework with various types of virtual cells is proposed to model the dynamics of traffic movements from approach to exit. The unique phenomenon of competitive occupying of the conflict point between the left turn and opposing through movements is modeled. The cell state indicating its blockage is proposed to capture the dynamic queue formulation and dissipation and to evaluate the operational traffic performance at the intersection. Field validation results show that the proposed model can capture the operation of traffic at signalized intersections without explicit permissive left‐turn yielding rules with significantly higher level of accuracy than traditional traffic flow models. Copyright © 2016 John Wiley & Sons, Ltd.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

Measurement biases in panel data

The objective of this paper is to examine reporting errors in panel data obtained from multi-day travel diaries. A distinction is made between within and between wave biases. The former leads to an increase in under-reporting associated with the number of days the diary is kept. The latter is related to the number of waves respondents have been participating, so-called panel experience. These biases imply that observed mobility changes between waves are partly due to reporting errors: without controlling for them, changes in mobility can not be inferred from the data. An important cause of these measurement errors is the increase in the number of days on which no trips at all were reported. In addition, shorter trips and less complex chains are more susceptible to underreporting. The methodology used in this paper provides a means of dealing with these problems. Attrition is taken into account by a rather simple measure. The paper concludes with a number of suggestions for sample and survey design.     

xPON技术在铁路视频监控系统的应用前景简

xPON作为新一代光纤接入技术,在抗干扰性、带宽特性、接入距离、维护管理等方面均具有巨大优势,将成为一种主流宽带接入技术,并在铁路视频监控系统中有很广阔的应用前景.