斜拉桥预应力体系布置与施工质量控制

由于斜拉桥设计的受力要求,预应力体系在纵、横、竖三向均有布置,锚具使用的种类多、部位多,预应力张拉施工技术复杂、要求高、难度大.以长沙湘江北大桥的施工实例,对其布置体系、施工技术、质量控制及经验进行总结,并提出了施工中应注意的问题和处理方法.     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

喷射混凝土在隧道支护中的应用

根据隧道合同段的具体实际情况及施工工艺,通过合理选择喷射混凝土的原材料,精确的配合比设计,正确选择喷射机械和工艺流程,严格控制喷射施工质量,使喷射混凝土作为围岩开挖后的主要支护构件,达到设计的作用效果.     

灌注混凝土桩施工方法及工艺的探讨

通过对钻孔灌注桩与沉入桩的对比分析,得出了钻孔灌注桩的优点,并且详细介绍了钻孔灌注桩的施工工艺和方法,总结了提高灌注混凝土桩承载力的方法和灌注桩的检测手段及一般事故处理方法,以供今后类似工程实践参考.     

工程测量课程实训环节教学改革及质量控制方法探讨

如何在有限的课内实训环节教学过程中,有效地组织开展实训项目,充分完成好实训环节任务布置、方案设计、素材准备、组织实施、成果检查和质量控制等问题,如何实现"教学过程"和"生产过程"的准确对接,如何真正地实训"教、学、做一体化",是提高课程实训环节教学效果、提高测绘专业实训教学效果的重要途径。本文针对工程测量课程,主要探讨课内实训环节教学方法改革和质量控制方法。     

高职院校实践教学质量保障体系探析

论述了构建高职院校实践教学质量保障体系的基本原则，分析了当前实践教学质量保障体系中存在的问题，并从完善实践教学管理制度、改善实践教学基础设施、打造“双师”素质师资队伍、建成高效实践教学质量监控和考核体系等四方面提出了具体的应对措施，以期为高职院校构建科学、合理、完善的实践教学质量保障体系提供借鉴。     

The desulphurisation of shipping: Past,present and the future under a global cap

As from January 2020, the International Maritime Organization (IMO) is implementing a global 0.5% limit on the sulphur content of fuel, commonly known as the global sulphur cap. This limit is the latest policy in the efforts to reduce sulphur emissions from shipping, following the designation of emission control areas (ECAs) and other regional regulations. In this paper, a literature review is conducted of academic studies that have dealt with issues relating to the reduction of maritime sulphur emissions. Various recurring research themes are identified, spanning the areas of operations research, maritime economics and transport policy. The effects and implications of available compliance options are then analyzed from the perspectives of ship operators, shippers and consumers. Using lessons learned from the enforcement of ECA regulations, this is followed by an appraisal of various potential issues related to the enforcement of these new global regulations. It is found that a homogeneous enforcement regime is required to ensure a level playing field amongst ship operators and that the global sulphur cap may lead to serious market distortion, due to the potential short term rise of fuel prices. The paper concludes with a set of recommendations for future research on sulphur emissions from shipping in the aftermath of the global cap and, looking forward, to its relationship to the IMO strategy on the reduction of greenhouse gas (GHG) shipping emissions.     

Solving the gate assignment problem through the Fuzzy Bee Colony Optimization

In the field of Swarm Intelligence, the Bee Colony Optimization (BCO) has proven to be capable of solving high-level combinatorial problems, like the Flight-Gate Assignment Problem (FGAP), with fast convergence performances. However, given that the FGAP can be often affected by uncertainty or approximation in data, in this paper we develop a new metaheuristic algorithm, based on the Fuzzy Bee Colony Optimization (FBCO), which integrates the concepts of BCO with a Fuzzy Inference System. The proposed method assigns, through the multicriteria analysis, airport gates to scheduled flights based on both passengers’ total walking distance and use of remote gates, to find an optimal flight-to-gate assignment for a given schedule. Comparison of the results with the schedules of real airports has allowed us to show the characteristics of the proposed concepts and, at the same time, it stressed the effectiveness of the proposed method.     

A novel approach for the modelling of air quality dynamics in underground railway stations

Indoor air quality in subterranean train stations is a concern in many places around the globe. However, due to the specificity of each case, numerous parameters of the problem remain unknown, such as the braking discs particle emission rate, the ventilation rate of the station or the complete particle size distribution of the emitted particles. In this study the problem of modelling PM₁₀ concentration evolution in relation with train traffic is hence addressed with a particle-mass conservation model which parameters are fitted using a genetic algorithm. The parameters of the model allow to reproduce the dynamics and amplitude of four field data sets from the French and Swedish underground contexts and comply with realistic bounds in terms of emissions, deposition and ventilation rate.     

公路工程施工管理质量研究

公路工程施工管理直接关系到工程项目的质量,在施工中加强管理控制是十分必要的,结合公路工程施工管理的特点,对影响公路工程管理质量的因素进行分析,并提出具体解决对策,对类似工程施工有一定的指导意义.