Improvement of the second order approximation of the smoothed particle hydrodynamics

The smoothed particle hydrodynamics (SPH), as a fully Lagrangian particle method, has been successfully applied to astrophysical problems and extended to elastic dynamics and computational fluid dynamics.High order derivatives have to be approximated when elastic dynamics problems are modeled. However, the approximation errors in SPH could lead to computational failure in the case that the order of derivative is high.A novel method was proposed in order to improve the accuracy of SPH method, which shows the relationship between the selected functions and their SPH approximations. The entire involved system was represented by a finite number of particles that carry individual mass and occupy individual space, and the integral interpolation was approximated by a summation interpolation. In addition, error comparison was made between SPH method with and without the present improvement.     

Joint distortion model for progressive image transmission using error correcting arithmetic codes

A novel joint source channel distortion model was proposed, which can essentially estimate the average distortion in progressive image transmission. To improve the precision of the model, the redundancy generated by a forbidden symbol in the arithmetic codes is used to distinguish the quantization distortion and the channel distortion, all the coefficients from the first error one to the end of the sequence are set to be a value within the variance range of the coefficients instead of zero, then the error propagation coming from the entropy coding can be essentially estimated, which is disregarded in the most conventional joint source channel coding （JSCC） systems. The precision of the model in terms of average peak-signal-to-noise has been improved about 0.5 dB compared to classical works. An efficient unequal error protection system based on the model is developed, and can be used in the wireless communication systems.     

A multi-objective optimal approach to automated construction of sacrificial multi-piece molds

Sacrificial multi-piece molds can be used for producing complex parts. To obtain the optimal design of molds automatically, a multi-objective optimal approach is proposed. Mold pieces number, material utilization and partitioning area are taken as the objective functions, and the machinability of each mold piece is taken as constraint condition. Genetic algorithm (GA) is adopted to realize global optimization of partitioning process. Each mold piece in optimal scheme can be manufactured by milling and drilling operations, which reduce the tooling cost and shorten product cycle obviously. Using the proposed approach, mold design can be significantly automated for making complex parts.     

Multi-try counter-meshing gears discrimination device based on MEMS technology

A multi-try counter-meshing gears (CMG) discrimination device based on micro electromechani-cal system (MEMS) technology was designed for some specified information fields. The discrimination deviceconsists of two groups of metal CMG, two pawl/ratchet mechanisms, two driving micromotors and two re-setting micromotors, which make the CMG withdraw by raising the pawls. The energy-coupling element isa photoelectric sensor with a circular plate which is notched. Micromotor is fabricated using the ultravioletLiGA (UV-LiGA) fabrication process and precision mechanical engineering. The discrimination device has thefunction which can automatically reset, with the correct resetting code, it can be tried another times.     

Reliability analysis of repairable systems using stochastic point processes

In order to analyze the failure data from repairable systems, the homogeneous Poisson process(HPP) is usually used. In general, HPP cannot be applied to analyze the entire life cycle of a complex, re-pairable system because the rate of occurrence of failures (ROCOF) of the system changes over time rather thanremains stable. However, from a practical point of view, it is always preferred to apply the simplest methodto address problems and to obtain useful practical results. Therefore, we attempted to use the HPP model toanalyze the failure data from real repairable systems. A graphic method and the Laplace test were also usedin the analysis. Results of numerical applications show that the HPP model may be a useful tool for the entirelife cycle of repairable systems.     

AQP4在COPD支气管黏膜的表达及其与患者肺功能、气道黏膜炎症的相关性

目的通过免疫组化法检测支气管黏膜中水通道蛋白-4(aquaporin-4,AQP4)的表达,观察正常组和慢性阻塞性肺疾病(chronic obstructive pulmonary disease,COPD)组支气管黏膜中AQP4表达与气道黏膜炎症及肺功能的关系,明确AQP4在COPD发生、发展中的作用,为COPD的防治开辟新途径。方法选择正常人和COPD患者各30例,测试肺功能,并行支气管镜检查,取得支气管黏膜标本,用免疫组化法检测AQP4表达,HE染色观察支气管黏膜炎症细胞浸润程度。结果COPD组较对照组AQP4表达减弱有极显著差异(P<0.001)。AQP4表达和FEV1/FVC、FEV1/pred%呈正相关(P<0.001),与支气管黏膜炎症严重程度呈负相关(P<0.001)。结论COPD患者AQP4表达减少可能是其肺功能下降及气道炎症加重的原因之一。临床上可以通过改善AQP4治疗COPD。     

经颈静脉肝内门体分流术治疗肝硬化门脉高压症对机体液递物质的影响及疗效

目的探讨经颈静脉肝内门体分流术(TIPS)治疗肝硬化门脉高压症对机体液递物质的影响及其临床疗效评价。方法肝硬化门脉高压症患者40例,分为TIPS组和内科组,每组20例。另选健康成人20例,作为正常对照组。应用放免法及生化分析法测定各组各时段血清一氧化氮(NO)、白细胞介素-6(IL-6)及血浆丙二醛(MDA)的水平,观察临床表现及肝功能的变化。结果TIPS术后所有患者出血停止,一般状况改善明显,TIPS术后1 d血清丙氨酸氨基转移酶(ALT)较术前升高,且差异有显著性(P<0.01),术后7 d有所降低,与术前相比无显著性差异。两治疗组40例患者血清NOI、L-6及血浆MDA水平治疗前后均高于健康正常人(P<0.01)。TIPS组术后NO水平与内科组治疗一周后相比明显升高(P<0.01)。TIPS组术后NO水平较术前明显升高(P<0.01)。结论TIPS治疗肝硬化门静脉高压症近期疗效显著,术后肝功能无明显损害;术后血清NO水平升高,其机制可能与TIPS引起门脉及全身血流动力学变化有关;MDA无明显变化,表明肝脏总的血流灌注减少不明显。     

沥青路面PCI中车辙换算系数研究

通过对国内外车辙换算系数取值方法的研究,结合实体工程的实测数据与实际路况的对比,对现有车辙换算系数的优缺点进行了分析,提出了车辙换算系数的连续式计算公式。研究表明:根据现有车辙换算系数计算方法计算得到PCI指标值,与实际路况多数存在较大的偏差;而采用研究提出的车辙换算系数计算公式得到的PCI指标值,与实际路况有较好的一致性。     

���������ھ�ij��н�ͨ��Ϣ������άģ��

经过规范化的发展,已经涌现出不少成熟的企业信息集成(EII)模型,而城市交通信息集成（UTII）方面还缺乏规范、成熟的模型。基于此,本文从流程再造、数据交互以及数据挖掘三个方面,提出了一种城市交通信息集成三维模型（3D-UTII)。这三个维度的集成即为：基于流程再造的交通信息系统内部的深度集成（DDII）,基于异构数据库技术的交通信息系统间的广度集成（EDII）,以及基于数据挖掘技术的分析式集成（ADII）。本文对这三个维度的实施框架和具体实现技术分别做出了进一步阐述,最后使用北京市奥运交通应急系统的信息集成方案为实例对模型的实施做出了说明和验证。     

EPC�ܳа����µIJɹ��ּ��������о�

设计采购施工（EPC）总承包是项目管理的重要形式。本文主要分析了EPC总承包模式下设备和材料采购分级管理的原则及方法,研究了在项目建设过程中采购方对承包商进行合理监督的质量控制方法。结合作者分管的工作,本文提出了总承包项下设备和材料采购的重要性分级方法,建立了分级采购管理的程序。本文还指出了设备和材料采购分级监督的具体内容以及实施过程中可能出现的问题及协调方法。论文提出的、基于经验的发挥业主和EPC承包商各自的优势、促进他们之间的协作的思路与方法对改进项目管理质量具有现实意义。