Spatiotemporal influence of land use and household properties on automobile travel demand

Understanding the patterns of automobile travel demand can help formulate policies to alleviate congestion and pollution. This study focuses on the influence of land use and household properties on automobile travel demand. Car license plate recognition (CLPR) data, point-of-interest (POI) data, and housing information data were utilized to obtain automobile travel demand along with the land use and household properties. A geographically and temporally weighted regression (GTWR) model was adopted to deal with both the spatial and temporal heterogeneity of travel demand. The spatial-temporal patterns of GTWR coefficients were analyzed. Also, comparative analyses were carried out between automobile and total person travel demand, and among travel demand of taxis, heavily-used private cars, and total automobiles. The results show that: (I) The GTWR model has significantly higher accuracy compared with the Ordinary Least Square (OLS) model and the Geographically Weighted Regression (GWR) model, which means the GTWR model can measure both the spatial and temporal heterogeneity with high precision; (II) The influence of built environment and household properties on automobile travel demand varies with space and time. In particular, the temporal distribution of regression coefficients shows significant peak phenomenon; and (III) Comparative analyses indicate that residents’ preference for automobiles over other travel modes varies with their travel purpose and destination. The above findings indicate that the proposed method can not only model spatial-temporal heterogeneous travel demand, but also provide a way to analyze the patterns of automobile travel demand.     

挂篮底模纵梁受力简化计算方法及承重分配系数

以一桥梁施工工程实例为依托,采用有限元软件ANSYS对桥梁悬臂施工中使用的菱形挂篮进行仿真分析.提出3种简化模式计算底模纵梁的承重分配,对比发现将底模纵梁承受的外荷载简化为集中荷载,并分配至挂篮下前后横梁的方法是最优简化计算方法.在此基础上对挂篮底模纵梁承重分配系数进行优化,从而简化了繁琐的挂篮底模纵梁受力分析计算,保证了挂篮结构设计和施工的安全.     

Autonomous cars: The tension between occupant experience and intersection capacity

Systems that enable high levels of vehicle-automation are now beginning to enter the commercial marketplace. Road vehicles capable of operating independently of real-time human control under an increasing set of circumstances will likely become more widely available in the near future. Such vehicles are expected to bring a variety of benefits. Two such anticipated advantages (relative to human-driver vehicle control) are said to be increased road network capacity and the freeing up of the driver-occupant’s time to engage in their choice of leisurely or economically-productive (non-driving) tasks.In this study we investigate the implications for intersection capacity and level-of-service of providing occupants of automated (without real-time human control), autonomously-operating (without vehicle-to-X communication) cars with ride quality that is equivalent (in terms of maximum rates of longitudinal and lateral acceleration) to two types of rail systems: [urban] light rail transit and [inter-urban] high-speed rail. The literature suggests that car passengers start experiencing discomfort at lower rates of acceleration than car drivers; it is therefore plausible that occupants of an autonomously-operating vehicle may wish to instruct their vehicle to maneuver in a way that provides them greater ride comfort than if the vehicle-control algorithm simply mimicked human-driving-operation.On the basis of traffic microsimulation analysis, we found that restricting the dynamics of autonomous cars to the acceleration/deceleration characteristics of both rail systems leads to reductions in a signalized intersection’s vehicle-processing capacity and increases in delay. The impacts were found to be larger when constraining the autonomous cars’ dynamics to the more-restrictive acceleration/deceleration profile of high-speed rail. The scenarios we analyzed must be viewed as boundary conditions, because autonomous cars’ dynamics were by definition never allowed to exceed the acceleration/deceleration constraints of the rail systems. Appropriate evidence regarding motorists’ preferences does not exist at present; establishing these preferences is an important item for the future research agenda.This paper concludes with a brief discussion of research needs to advance this line of inquiry.     

Flying with climate liability? Economic valuation of voluntary carbon offsets using forced choices

This study aims to examine how key aspects of voluntary climate action influence economic values of aviation carbon offsets using an Australian case study, where voluntary carbon offset programs for the aviation sector were active under a carbon tax between July 01, 2012 and July 17, 2014. An online survey was administered during the period using choice experiments. This rare and short-lived Australian experience is useful to gain insights into how individuals respond to the new public policy in terms of the perceived economic value of voluntary offsets for air travel. According to the estimation results, supporters of the mandatory tax policy held a welfare value of voluntary carbon offsets for their domestic flights that is three times larger than non-supporters (i.e., $AU27.83 vs. $AU9.40). It is $AU12.27 on average per ton of carbon offsets per person for domestic flights and $AU0.92 for international long-haul flights. The findings endorse that individuals seem to attach personal responsibility for carbon emissions (i.e. climate liability or carbon conscience) to frequent domestic flights, but not so much to intercontinental flights. Furthermore, reported flight frequencies by respondents did not place any significant impact on economic values of voluntary carbon offsets in both domestic and international frameworks. A coupled approach between forced choices and certainty responses was adapted, where no-choice options were retrieved, potentially improving choice experiments. Results suggest that airlines should consider simplifying their carbon offset programs to fixed levels (e.g. £3, £10, and £20 as in the case of British Airways), regardless of geographical boundaries, while governments should promote both mandatory and voluntary climate measures in tandem.     

Development and calibration of a long-distance passenger traffic assignment model

This paper studies the assignment of long-distance passenger traffic on a highway corridor network. First, we propose a traditional model for the long-distance traffic assignment considering interactions with local commuter traffic. It addresses the effect of local networks on highway corridors. An iterative algorithm is developed to solve for the exact solution. Then, to address the potential computational issues that arise therein, a decomposition method is proposed by introducing a new concept of corridor elasticity. An assignment procedure for long-distance passenger traffic is developed accordingly. Numerical tests show that the proposed decomposition method makes significant improvements in computational performance at a small loss of optimality. This decomposition method well approximates the exact assignment from the traditional formulation, especially when the highway corridors are near-saturation. The proposed decomposition method appears practical for application.     

船舶企业农民工稳定措施研究

分析当前船舶企业用工短缺现象,认为企业应当改变思路,完善机制,充分了解尊重并充分考虑当前农民工的需求,采取稳定农民工的措施。     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

Potentials of using social media to infer the longitudinal travel behavior: A sequential model-based clustering method

This study explores the possibility of employing social media data to infer the longitudinal travel behavior. The geo-tagged social media data show some unique features including location-aggregated features, distance-separated features, and Gaussian distributed features. Compared to conventional household travel survey, social media data is less expensive, easier to obtain and the most importantly can monitor the individual’s longitudinal travel behavior features over a much longer observation period. This paper proposes a sequential model-based clustering method to group the high-resolution Twitter locations and extract the Twitter displacements. Further, this study details the unique features of displacements extracted from Twitter including the demographics of Twitter user, as well as the advantages and limitations. The results are even compared with those from traditional household travel survey, showing promises in using displacement distribution, length, duration and start time to infer individual’s travel behavior. On this basis, one can also see the potential of employing social media to infer longitudinal travel behavior, as well as a large quantity of short-distance Twitter displacements. The results will supplement the traditional travel survey and support travel behavior modeling in a metropolitan area.     

基于家庭属性差异的大学生出行方式选择行为研究

为剖析家庭属性差异对大学生出行方式选择行为的影响，基于非集计理论，构建家庭属性差异的大学生出行选择多元Logit 模型. 根据四川省2 571 份大学生出行行为调查问卷，运用SPSS 软件标定模型参数，获取影响大学生出行选择的主要家庭属性因素，并进行敏感性分析. 结果表明：家庭平均年收入、经济净流对大学生出行方式选择有显著的影响；以航空运输为参考，家庭平均年收入、经济净流对公路运输方式选择的影响大于铁路运输；“祖辈替孙辈购买机票”的折扣票务形式可提高大学生选择航空出行的概率.     

Locating emergency vehicles with an approximate queuing model and a meta-heuristic solution approach

In this paper, the location of emergency service (ES) vehicles is studied on fully connected networks. Queuing theory is utilized to obtain the performance metrics of the system. An approximate queuing model the (AQM) is proposed. For the AQM, different service rate formulations are constructed. These formulations are tested with a simulation study for different approximation levels. A mathematical model is proposed to minimize the mean response time of ES systems based on AQM. In the model, multiple vehicles are allowed at a single location. The objective function of the model has no closed form expression. A genetic algorithm is constructed to solve the model. With the help of the genetic algorithm, the effect of assigning multiple vehicles on the mean response time is reported.