基于时延特性建模的多断面短时交通流预测

针对现有交通流预测方法未充分考虑多断面车流演变规律，提出基于时延特性建模的时空相关性计算方法. 该方法采用对不同断面、不同时刻交通流的分布相似性度量，对输入的车辆到达数据序列进行切割构建时空相似度矩阵，得到相邻断面之间的时延参数. 基于时延特性建模，将多断面之间的流量信息进行融合，使用长短时记忆(LSTM)网络进行流量预测. 通过对实际路段数据的预测和结果分析，验证所提方法的有效性和实用性.     

Estimation of delay variability at signalized intersections for urban arterial performance evaluation

Urban arterial performance evaluation has been broadly studied, with the major focus on average travel time estimation. However, in view of the stochastic nature of interrupted flow, the ability to capture the characteristics of travel time variability has become a critical step in determining arterial level of service (LOS). This article first presents a stochastic approach that integrates classic cumulative curves and probability theories in order to investigate delay variability at signalized intersections, as a dominant part of the link travel time variability. This serves as a basis for arterial travel time estimation, which can be obtained through a convolution of individual link travel time distributions. The proposed approach is then applied in the estimation of travel time along one arterial in Shanghai, China, with abundant automatic vehicle identification (AVI) data sources. The travel time variability is evaluated thoroughly at 30-min intervals, with promising results achieved in comparison to the field measurements. In addition, the estimated travel time distributions are utilized to illustrate the probability of multiple LOS ranges, namely, reliability LOS. The results provide insights into how we might achieve a more reliable and informative understanding of arterial performance.     

小型直喷式柴油机燃用生物质能燃料的性能研究

文章主要研究了生物质能混合燃料在柴油机上的应用,通过在一台小型直喷式柴油机上进行不同组分柴油-生物柴油-乙醇混合燃料的燃烧、油耗和排放性能对比试验,分析了乙醇含量的改变对混合燃料的发动机燃烧压力、滞燃期、放热规律、比油耗和排放的影响．     

关于城轨列车折返能力计算与加强的研究

论证折返出发间隔时间是决定列车折返能力的基本参数,提出折返出发间隔时间计算方法,分析采用特殊列车交路对折返出发间隔时间的影响,并针对影响折返出发间隔时间的因素提出加强列车折返能力的措施。     

Augmented Reality Vehicle system: Left-turn maneuver study

Augmented Reality “AR” is a promising paradigm that can offer users with real-time, high-quality visualization of a wide variety of information. In AR, virtual objects are added to the real-world view in real time. The AR technology can offer a very realistic environment for enhancing drivers’ performance on the road and testing drivers’ ability to react to different road design and traffic operations scenarios. This can be achieved by adding virtual objects (people, vehicles, hazards, and other objects) to the normal view while driving an actual vehicle in a real environment. This paper explores a new Augmented Reality Vehicle “ARV” system and attempts to apply this new concept to a selected traffic engineering application namely the left-turn maneuver at two-way stop-controlled “TWSC” intersection. This TWSC intersection experiment, in addition to testing the feasibility of the application, tries to quantify the size of gaps accepted by different driver’s characteristics (age and gender). The ARV system can be installed in any vehicle where the driver can see the surrounding environment through a Head Mounted Display “HMD” and virtual objects are generated through a computer and added to the scene. These different environments are generated using a well defined set of scenarios. The results from this study supported the feasibility and validity of the proposed ARV system and they showed promise for this system to be used in the field-testing for the safety and operation aspects of transportation research. Results of the left-turn maneuver study revealed that participants accepted gaps in the range of 4.0-9.0 s. This finding implies that all gaps below 4 s are rejected and all gaps above 9 s are likely to be accepted. The mean value of the left-turn time was 4.67 s which is a little bit higher than reported values in the literature (4.0-4.3 s). Older drivers were found to select larger gaps to make left turns than younger drivers. The conservative driving attitude of older drivers indicates the potential presence of reduced driving ability of elderly. Drivers’ characteristics (age and gender) did not significantly affect the left-turn time. Based on the survey questions that were handed to participants, most participants indicated good level of comfort with none or small level of risk while driving the vehicle with the ARV system. None of the participants felt any kind of motion sickness and the participants’ answers indicated a good visibility and realism of the scene with overall good system fidelity.     

隧道爆破信号主分量特征提取与毫秒延期识别研究

为了准确揭示隧道爆破振动信号所包含的反映爆破特征参数的重要信息,通过EMD分解与交叉小波变换组合分析方法对实测爆破信号进行分析,得到各分量与原信号的相关性系数,从而准确判别出信号的主分量。再依据相关性系数对包含主分量在内的相关分量重组并进行Hilbert变换取模值,精确识别出隧道采用的各段别雷管的毫秒延期时间。结果表明： 组合方法确定的主分量及相关分量重组信号能够突出爆破信号的主要特征,对隧道爆破信号的分析效果好。     

船舶液压起重机延迟反馈吊重消摆控制

由于操纵和工作环境的变化,起重机的吊重在工作过程中会产生摆动,这种摆动降低了起重机的工作效率和安全性能。文章以集美大学轮机工程实验中心船舶液压起重机为研究对象,采用机电液仿真建模技术及拉格朗日方程,在MATLAB Simulink仿真软件平台上,建立起重机操作液压系统及吊重摆动模型,采用与试验数据对比的方法对所建立的模型进行验证。设计基于吊重摆动位置延迟反馈的控制器,通过将延迟反馈信号叠加到操作信号上的方法实现吊重的消摆控制。结果表明,在各种操作情况下,延迟反馈控制器均能很好地抑制吊重的摆动。     

动态载荷识别的自适应延迟逆模型方法

为减小载荷识别问题对原系统先验知识的依赖,采用系统的自适应延迟逆模型识别时域载荷。采用自适应算法辨识延迟逆模型,代替了一般识别方法中的系统特性矩阵求逆过程,避免了病态问题。随后将工作状态下的响应作为逆模型的输入,则其输出就是时域载荷的延迟估计。通过对两端简支梁结构进行载荷识别的仿真研究,以及对双层隔振试验台架的试验研究,识别了稳态激励和瞬态激励,验证了该方法的有效性。该方法不需要了解系统的数学模型及参数,因此能够应用于工程实践中。     

网络环境下无人水面艇航向控制器设计

无人水面艇自主航行中受到外部环境干扰及在控制中心-执行器网络通道中存在网络诱导特性(如网络诱导时延、数据丢包等)的影响,会降低系统性能,影响航向控制系统的稳定性.为了能使无人艇按照设定航向快速、稳定地航行,提出一种基于网络的无人艇航向控制策略.首先,建立基于网络的无人艇航向控制系统模型.基于这个模型,运用Lyapunov稳定性理论和凸分析方法导出能使网络环境下无人水面艇航向控制系统渐进稳定的控制律,并设计基于网络的航向控制器.通过仿真验证所提出方法和设计控制器的有效性.     

单交叉口公交信号优先控制策略建模研究

为研究公交信号优先策略对交叉口公交车及社会车辆的影响,建立公交信号优先控制模型及延误模型,以采取公交优先方式后交叉口所有车辆的人总延误减小为控制目标,引入效益指数PI,以信号交叉口优先相位获得的效益与非优先相位损失效益的差值来衡量整体效益,使得每一次采取的公交优先策略都能提高信号交叉口的整体效益。结果表明:在信号交叉口采取信号优先控制策略后,交叉口车辆的人总延误显著降低。本研究成果对其他信号优先控制方式模型、交叉口群公交优先协调控制等具有一定的参考价值和理论意义。