PHEV发动机驱动工况效率耦合分析与优化控制

单轴并联式混合动力系统（Parallel Hybrid Electric Vehicle,PHEV）包括电池、驱动电机、发动机、自动变速器等多个关键部件。各部件效率特性存在相互耦合的关系,要实现系统整体效率最优,需要辨明影响系统效率的控制参数,并对系统整体效率最优的控制参数进行优化。以装备无级变速器（Continuously Variable Transmission,CVT）的PHEV为研究对象,首先对系统各关键部件的效率特性进行分析,建立各关键部件效率模型,明确各部件效率与控制参数、状态参数之间的关系。在此基础上,对发动机单独驱动模式下动力传递路径中不同部件的效率耦合关系进行分析,推导出系统燃油消耗量与动力系统各状态参数、控制参数之间的函数关系。根据分析结果,选取车辆需求功率及车速为状态参数,变速器速比及发动机转矩为控制参数,以系统燃油消耗量最小为目标建立优化目标函数和约束条件,对系统优化问题进行定义。根据优化问题的特点,设计基于模拟退火的优化算法对优化问题进行求解,获取系统燃油消耗率最小时变速器目标速比和发动机目标转矩随状态参数的变化关系。建立系统仿真模型对所述优化算法进行仿真分析,并搭建混合动力试验台对优化结果进行试验验证。结果表明：无级变速器效率对系统整体效率影响较大,采用优化控制规律使发动机效率有所降低,但无级变速器效率升高更大,系统整体效率升高;在功率需求一定的循环工况下,优化控制算法比传统上仅以发动机效率最高为目标的控制算法节油1%~2%。     

山区高速公路弃渣体物理力学特性试验研究

公路弃土场是一种特殊的人工堆积体,对其进行稳定性分析与评价需要掌握弃渣体的物理力学指标。文章以厦蓉高速公路水都段典型弃土场弃渣体为研究对象,介绍采用现场试验和室内试验方法,对弃渣体的最大干密度和抗剪强度等参数进行研究。通过研究得到：不同颗粒成分弃渣体的最大干密度不同,但在通常推填方式下,弃渣体的强度指标基本不受压实度控制。     

The Alternative Motor Fuels Act, alternative-fuel vehicles, and greenhouse gas emissions

The corporate average fuel economy (CAFE) standard is the major policy tool to improve the fleet average miles per gallon of automobile manufacturers in the US. The Alternative Motor Fuels Act (AMFA) provides special treatment in calculating the fuel economy of alternative-fuel vehicles to give manufacturers CAFE incentives to produce more alternative-fuel vehicles. AMFA has as its goals an increase in the production of alternative-fuel vehicles and a decrease in gasoline consumption and greenhouse gas emissions. This paper examines theoretically the effects of the program set up under AMFA. It finds that, under some conditions, this program may actually increase the production of fuel-inefficient gasoline vehicles, gasoline consumption and greenhouse gas emissions.     

管道内防腐层补口技术研究进展

管道内衬或内防腐涂层现场施焊时,焊缝两侧的防腐层会由于高温作用而破坏,使环焊缝处不能得到有效的保护,内补口技术也成为影响管道质量的主要瓶颈。文中介绍了国内外主要的内补口技术,如内补口机法、内衬保护套（管）焊接法、不锈钢接头法、机械连接法等,并指出各方法的特点。文中还就内补口技术的质量控制和研究方向等提出了建议。     

考虑螺旋桨体积力的水下机器人水动力特性仿真

为在初步设计时预测ROV的水动力性能,使用CFD技术进行分析,以ROV模型为例,最大程度地保留ROV内部的构件,使模型更加接近真实状况。分别计算ROV在不同工况下的阻力、不同漂角下的横向力和转艏力矩以及添加体积力模型之后的螺旋桨流场状况,很好地模拟出ROV周围的流场,并与已有的试验数据进行对比。结果验证了CFD水动力仿真的可行性和准确性,并还可预测ROV在螺旋桨作用下的进速等,对ROV设计具有实际的参考价值和指导意义。     

Shared autonomous electric vehicle (SAEV) operations across the Austin,Texas network with charging infrastructure decisions

Shared autonomous vehicles, or SAVs, have attracted significant public and private interest because of their opportunity to simplify vehicle access, avoid parking costs, reduce fleet size, and, ultimately, save many travelers time and money. One way to extend these benefits is through an electric vehicle (EV) fleet. EVs are especially suited for this heavy usage due to their lower energy costs and reduced maintenance needs. As the price of EV batteries continues to fall, charging facilities become more convenient, and renewable energy sources grow in market share, EVs will become more economically and environmentally competitive with conventionally fueled vehicles. EVs are limited by their distance range and charge times, so these are important factors when considering operations of a large, electric SAV (SAEV) fleet.This study simulated performance characteristics of SAEV fleets serving travelers across the Austin, Texas 6-county region. The simulation works in sync with the agent-based simulator MATSim, with SAEV modeling as a new mode. Charging stations are placed, as needed, to serve all trips requested (under 75 km or 47 miles in length) over 30 days of initial model runs. Simulation of distinctive fleet sizes requiring different charge times and exhibiting different ranges, suggests that the number of station locations depends almost wholly on vehicle range. Reducing charge times does lower fleet response times (to trip requests), but increasing fleet size improves response times the most. Increasing range above 175 km (109 miles) does not appear to improve response times for this region and trips originating in the urban core are served the quickest. Unoccupied travel accounted for 19.6% of SAEV mileage on average, with driving to charging stations accounting for 31.5% of this empty-vehicle mileage. This study found that there appears to be a limit on how much response time can be improved through decreasing charge times or increasing vehicle range.     

Back-Calculation of Ground Stress Field and Rockburst Analysis for Wunvfeng Tunnel北大核心CSCD

Studying the in-situ stress distribution at a tunnel site is very important to determine surrounding rock characteristics, the engineering design and the construction scheme. By using the multiple linear regression method based on the least square algorithm, the initial geostress field is analyzed and the corresponding regression coefficients are obtained. The ground stress obtained from the proposed back analysis is reasonable and can meet the demands of the engineering applications. From the rockburst risk level distribution diagram, it is speculated that the Wunvfeng tunnel is in the high filed stress area. Field monitoring should be strengthened and emergency plans should be made to cope with the rockburst risks during the construction process. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Effects of Overloading on the Mechanical Properties of Tunnel Structures in the Silty Ground --A Case Study of Sutong River-crossing GIL Utility Tunnel北大核心CSCD

Based on the Sutong GIL utility tunnel project, which is constructed by the shield machine under the river, and as for the overloading problem at the river bank slope during operating period, the refined threedimensional finite element model was established to study the deformation and cracking characteristics of the tunnel segment structure under different forms of overloading. The evolution laws of section convergence, joint opening and structural stress were analyzed, and the structure damage mechanisms were revealed under conditions of large area loading and local loading. The surface-surcharge control standard was proposed. For the big diameter shield tunneling crossing the silty clay, the research results show that: (1) the deformation failure process is divided into three stages under large area loading condition, taking the design load and compressive yield of rebars inside haunch as the critical points respectively. The first stage is characterized by the elastic stress, the second stage is in plastic state with fracture, and the third stage is accelerating deformation and instability stage. The vertical convergence is 110.5 mm with no opening of joints when rebars are yielded; (2)the deformation failure process under local loading condition is also divided into elasticity, plasticity and instability stages, taking the design load and tensile yield of rebars outside haunch as the critical points respectively. The vertical convergence is 152.6 mm with joint opening of 4.36 mm; (3) the early-warning values of additional stress on the ground under conditions of large area loading and local loading are 110 kPa and 70 kPa respectively. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

组合型水泥粉煤灰碎石桩(CFG桩)复合地基在深厚软基处理中的应用

在深厚软土地基(fak≤100 kPa)上建造储罐等建筑物,承载力要求高、不均匀沉降变形要求严,若采用单一CFG桩复合地基加固,可能导致桩距过小或桩长太长,需要采用组合型复合地基,CFG桩+振冲碎石桩复合地基是组合型复合地基的一种。根据CFG桩+碎石桩组合型复合地基的加固机理,分析了其受力特性以及CFG桩和碎石桩的作用,研究表明CFG桩对提高地基承载力和减小沉降起控制作用。基于优化理论,建立了组合复合地基的优化设计方法。通过工程实例讨论了组合复合地基的优化设计方法,结果表明:复合地基的承载力、沉降量和经济效益均满足工程要求。     

Electric vehicles for greenhouse gas reduction in China: A cost-effectiveness analysis

There have been ongoing debates over whether battery electric vehicles contribute to reducing greenhouse gas emissions in China’s context, and if yes, whether the greenhouse gas emissions reduction compensates the cost increment. This study informs such debate by examining the life-cycle cost and greenhouse gas emissions of conventional vehicles, hybrid electric vehicles and battery electric vehicles, and comparing their cost-effectiveness for reducing greenhouse gas emissions. The results indicate that under a wide range of vehicle and driving configurations (range capacity, vehicle use intensity, etc.), battery electric vehicles contribute to reducing greenhouse gas emissions compared with conventional vehicles, although their current cost-effectiveness is not comparable with hybrid electric vehicles. Driven by grid mix optimization, power generation efficiency improvement, and battery cost reduction, the cost-effectiveness of battery electric vehicles is expected to improve significantly over the coming decade and surpass hybrid electric vehicles. However, considerable uncertainty exists due to the potential impacts from factors such as gasoline price. Based on the analysis, it is recommended that the deployment of battery electric vehicles should be prioritized in intensively-used fleets such as taxis to realize high cost-effectiveness. Technology improvements both in terms of power generation and vehicle electrification are essential in improving the cost-effectiveness of battery electric vehicles.