垃圾转运车后门液压系统故障分析

针对在实际生产过程中出现的垃圾转运车后门不能举升和下降的故障现象,通过对液压系统原理图的分析和借助适当的检测工具,按照由简单到复杂的原则,逐一排查可能引起故障的原因,使故障得以快速解决,并提供了一种对故障原因进行分析的思路。     

直线电机车辆集电靴升靴故障分析及改进建议

针对直线电机车辆集电靴正线不能升靴的故障现象,分析了故障发生的原因。从工作原理和作业规程出发,提出加装集电靴人工升靴装置改进建议并优化作业流程。即:在新线车辆设计时增加导电靴升靴功能,对既有车辆不建议进行改造。对于现有列车在正线停放,建议列车保持升靴状态的方法简单可行。     

树脂运输罐式半挂车的结构

介绍了树脂运输罐式半挂车的工作方式和工作流程，整车布置及主要部件结构。     

Heavy duty vehicle rollover detection and active roll control

This paper presents the results of a comprehensive study on heavy-duty vehicle (HDV) roll stability improvement technology. The proposed rollover threat warning system uses the real-time dynamic model-based time-to-rollover (TTR) metric as a basis for online rollover detections. Its feasibility for implementation in a HDV rollover threat detection system is demonstrated through vehicle dynamic simulation studies. The research on the development of a rollover threat detection system is further enhanced in combination with an active roll control system using active suspension mechanism to improve heavy-duty trucks’ roll stability both in the static cornering and in emergency maneuvers. It has been demonstrated that the roll stability of typical heavy-duty trucks has been largely improved by the proposed active safety monitoring and control system.     

地铁车辆接地技术分析

文章主要以上海轨道交通4号线车辆为例,介绍了地铁车辆整车接地的分类和特点,对地铁车辆的接地设计原则进行了分析。     

上海地铁13号线车辆底架线槽与布线设计探究

由于地铁车辆的大部分重要电缆都位于车体下方,电缆的外部环境相当恶劣,为了有效防护电缆以减少安全隐患,在地铁车辆上使用了线槽。在模块化概念深入企业设计与生产理念的现状下,结合上海地铁13号线车辆项目,对线槽设计、布线要求、电磁兼容、有限元分析等进行了分析。     

智能网联技术应用于混合动力汽车探析

文章简要介绍了混合动力汽车和智能网联技术的研究现状,阐明了混合动力汽车与智能网联技术相结合的意义。着重论述了在智能网联环境下混合动力汽车进行能量管理的优势以及混合动力汽车实现智能网联的技术要求,最后对未来二者的依托发展进行了展望。     

Study on driver model for hybrid truck based on driving simulator experimental results

In this paper, a proposed car-following driver model taking into account some features of both the compensatory and anticipatory model representing the human pedal operation has been verified by driving simulator experiments with several real drivers. The comparison between computer simulations performed by determined model parameters with the experimental results confirm the correctness of this mathematical driver model and identified model parameters. Then the driver model is joined to a hybrid vehicle dynamics model and the moderate car following maneuver simulations with various driver parameters are conducted to investigate influences of driver parameters on vehicle dynamics response and fuel economy. Finally, major driver parameters involved in the longitudinal control of drivers are clarified.     

复杂地段96m双线钢桁架梁顶推施工技术

介绍了京津城际轨道交通工程改京山线96 m双线简支钢桁架梁跨越北京市二环路顶推施工技术,该桥施工时因地制宜,充分利用二环路的辅路空间以尽量减小顶推跨度,上滑道采取间断式布置,下滑道采用不连续多段长滑道,用八三式军用墩器材搭设临时墩,并在主梁前方加设长导梁,顺利完成了钢桁梁顶推架设。另外还介绍了在顶推和落梁过程中应该注意的问题。     

地铁车辆铝合金车体的铆接工艺

简述了南京地铁一号线车辆铝合金车体的组成部件、车体六大部件的制作工艺和车体的组装铆接工艺,以及铝合金车体铆接的特点。