轴对称解对隧道衬砌水压力计算的适用性研究

文章根据渗流理论推导了隧道衬砌水压力的轴对称解,并利用数值分析方法研究了轴对称解对不同形状隧道断面与浅埋隧道的适用性.研究结果表明:轴对称解适用于非圆形隧道断面衬砌水压力的估算;隧道断面形状对衬砌水压力折减系数的影响较小,可以忽略不计,其影响大小主要由衬砌与围岩的渗透系数比值决定.对于浅埋低水头隧道,用轴对称解计算的毛洞流量Qm与数值解比较,其误差较大,最大误差为36.5％;但用来计算衬砌水压力p1以及衬砌后水流量Q1时,误差相对较小,最大误差为6.3％,特别是利用轴对称解得出的衬砌水压力值与利用数值解得出的衬砌水压力特征值最大误差仅为3.4％.     

管道内防腐层补口技术研究进展

管道内衬或内防腐涂层现场施焊时,焊缝两侧的防腐层会由于高温作用而破坏,使环焊缝处不能得到有效的保护,内补口技术也成为影响管道质量的主要瓶颈。文中介绍了国内外主要的内补口技术,如内补口机法、内衬保护套（管）焊接法、不锈钢接头法、机械连接法等,并指出各方法的特点。文中还就内补口技术的质量控制和研究方向等提出了建议。     

Predictive power of inspection outcomes for future shipping accidents – an empirical appraisal with special attention for human factor aspects

This paper investigates whether deficiencies detected during port state control (PSC) inspections have predictive power for future accident risk, in addition to other vessel-specific risk factors like ship type, age, size, flag, and owner. The empirical analysis links accidents to past inspection outcomes and is based on data from all around the globe of PSC regimes using harmonized deficiency codes. These codes are aggregated into eight groups related to human factor aspects like crew qualifications, working and living conditions, and fatigue and safety management. This information is integrated by principal components into a single overall deficiency index, which is related to future accident risk by means of logit models. The factor by which accident risk increases for vessels with above average compared to below average deficiency scores is about 6 for total loss, 2 for very serious, 1.5 for serious, and 1.3 for less-serious accidents. Relations between deficiency scores and accident risk are presented in graphical format. The results may be of interest to PSC authorities for targeting inspection areas, to maritime administrations for improving asset allocation based on prediction scenarios connected with vessel traffic data, and to maritime insurers for refining their premium strategies.     

考虑螺旋桨体积力的水下机器人水动力特性仿真

为在初步设计时预测ROV的水动力性能,使用CFD技术进行分析,以ROV模型为例,最大程度地保留ROV内部的构件,使模型更加接近真实状况。分别计算ROV在不同工况下的阻力、不同漂角下的横向力和转艏力矩以及添加体积力模型之后的螺旋桨流场状况,很好地模拟出ROV周围的流场,并与已有的试验数据进行对比。结果验证了CFD水动力仿真的可行性和准确性,并还可预测ROV在螺旋桨作用下的进速等,对ROV设计具有实际的参考价值和指导意义。     

Shared autonomous electric vehicle (SAEV) operations across the Austin,Texas network with charging infrastructure decisions

Shared autonomous vehicles, or SAVs, have attracted significant public and private interest because of their opportunity to simplify vehicle access, avoid parking costs, reduce fleet size, and, ultimately, save many travelers time and money. One way to extend these benefits is through an electric vehicle (EV) fleet. EVs are especially suited for this heavy usage due to their lower energy costs and reduced maintenance needs. As the price of EV batteries continues to fall, charging facilities become more convenient, and renewable energy sources grow in market share, EVs will become more economically and environmentally competitive with conventionally fueled vehicles. EVs are limited by their distance range and charge times, so these are important factors when considering operations of a large, electric SAV (SAEV) fleet.This study simulated performance characteristics of SAEV fleets serving travelers across the Austin, Texas 6-county region. The simulation works in sync with the agent-based simulator MATSim, with SAEV modeling as a new mode. Charging stations are placed, as needed, to serve all trips requested (under 75 km or 47 miles in length) over 30 days of initial model runs. Simulation of distinctive fleet sizes requiring different charge times and exhibiting different ranges, suggests that the number of station locations depends almost wholly on vehicle range. Reducing charge times does lower fleet response times (to trip requests), but increasing fleet size improves response times the most. Increasing range above 175 km (109 miles) does not appear to improve response times for this region and trips originating in the urban core are served the quickest. Unoccupied travel accounted for 19.6% of SAEV mileage on average, with driving to charging stations accounting for 31.5% of this empty-vehicle mileage. This study found that there appears to be a limit on how much response time can be improved through decreasing charge times or increasing vehicle range.     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Effect of Seismic Parameters on the Safety Factor for an Underground Cavern北大核心CSCD

In order to quantitatively evaluate the safety of the surrounding rock of an underground cavern under seis-mic load, a comprehensive evaluation method for the stability of surrounding rock is proposed based on the general safety factor and point safety factor. A calculation method for the general safety factor of a cavern based on the prin-ciple of shear strength reduction of a rock mass is given, the run-through of the plastic zone between the main power-house and main transformer room is presented as a critical criterion for the overall instability of the cavern, and the general safety factor is obtained by searching for the reduction coefficient. A point safety factor calculation method based on the Mohr-Coulomb yield criterion is given. The influence of different seismic input parameters on the general safety factor of the cavern and the point safety factor of key positions are studied based on an underground power-house cavern of a hydropower station in Southwest China. The results show that the quantitative evaluation method for the stability of the surrounding rock based on the safety factor is feasible and can reflect the general safety de-gree and local safety degree of different positions of the cavern for different working conditions. It is found that the general safety factor of the cavern and the point safety factor of key positions decrease with an increase of the ampli-tude and duration of a seismic wave while they increase with an increase of the incident angle; additionally, the low frequency of a seismic wave has a great influence on the cavern while the high frequency has little effect. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Electric vehicles for greenhouse gas reduction in China: A cost-effectiveness analysis

There have been ongoing debates over whether battery electric vehicles contribute to reducing greenhouse gas emissions in China’s context, and if yes, whether the greenhouse gas emissions reduction compensates the cost increment. This study informs such debate by examining the life-cycle cost and greenhouse gas emissions of conventional vehicles, hybrid electric vehicles and battery electric vehicles, and comparing their cost-effectiveness for reducing greenhouse gas emissions. The results indicate that under a wide range of vehicle and driving configurations (range capacity, vehicle use intensity, etc.), battery electric vehicles contribute to reducing greenhouse gas emissions compared with conventional vehicles, although their current cost-effectiveness is not comparable with hybrid electric vehicles. Driven by grid mix optimization, power generation efficiency improvement, and battery cost reduction, the cost-effectiveness of battery electric vehicles is expected to improve significantly over the coming decade and surpass hybrid electric vehicles. However, considerable uncertainty exists due to the potential impacts from factors such as gasoline price. Based on the analysis, it is recommended that the deployment of battery electric vehicles should be prioritized in intensively-used fleets such as taxis to realize high cost-effectiveness. Technology improvements both in terms of power generation and vehicle electrification are essential in improving the cost-effectiveness of battery electric vehicles.     

国外海上补给关键技术的发展

海上补给是指利用各种补给装备及技术在海上对舰船实施物资补充、人员车辆换乘的一种海上作业活动,是海军中远海作战的主要物资保障及转运方式,相关技术的研制及发展历来受到各国重视。本文介绍了国外海军海上补给技术的最新进展,重点针对横向补给、靠帮补给及车辆转驳等关键领域,分析了其背景及现状,梳理了技术研制情况,总结了未来发展趋势及各自关键技术。分析认为,多种新技术应用扩大了物资及装备海上转运的适用范围,提高了输转效率及作业安全性,并使海上补给技术发展呈现出重型化、快速化、智能化的趋势。     

斜向波浪对斜坡堤胸墙作用力的试验研究

斜坡堤胸墙的稳定性主要受到波浪作用的影响,而且实际工程中斜坡堤多受斜向波浪作用。通过斜向与正向不规则波对斜坡堤胸墙作用的物理模型试验研究,分析斜坡堤单个胸墙所受的斜向波浪总力的折减系数随水位和波浪入射角度的变化规律,并与斜向波浪对单元直立堤的作用情况进行对比。结果表明:斜坡堤单个胸墙所受的斜向波浪总力的折减系数总体上随着水位的降低而变小,随着波浪入射角度的减小而变小;斜向波浪总浮托力的折减系数一般小于总水平力的折减系数;在不同水位和波浪入射角下,斜坡堤单个胸墙所受的斜向波浪总力的折减系数与单元直立堤有一定差别。