T形梁桥加固前后力学性能分析

以京广线某特大桥为背景,对T型梁桥加固前后的力学性能进行分析研究。针对桥梁存在的问题,通过加强桥梁横向联系和加大桥墩截面尺寸的方式对桥梁进行加固,并建立加固前后的空间有限元模型,对桥梁加固前后的横向刚度和竖向刚度进行对比分析。     

船用曳引式升降机动力学建模及仿真分析

对船用升降机动态特性的研究一直以来都是升降机研究领域的一个薄弱环节。针对船用升降机的特殊性,根据曳引式升降机的物理模型建立升降机垂直方向上的动力学模型,并结合模态分析法研究该模型,得出升降机位置对其固有频率的影响。以船体振动中螺旋桨和主机振动频率为激励频率,将理想电气速度曲线引入系统中,运用Matlab软件模拟系统响应的全过程,得出船用升降机的一些基本运行特性。     

CTC条件下铁路客运站股道运用决策支持系统

结合车站自律机、联锁系统、客运站股道运用技术作业及其要求,设计了基于分散自律控制原则的系统模型、功能与体系结构。运用现代排序理论,构建了股道运用实时调整可控排序模型和耦合模型,提出了基于合成分派规则的三步算法与股道运用通用启发式算法,求解股道运用系列决策问题,解决铁路行车及调车作业之间的干扰问题,并开发了CTC条件下铁路客运站股道运用决策支持系统。分析结果表明:合成分派规则的平均优化解明显优于基本分派规则的平均优化解,合成分派规则EDD+FIFO获得的解最优;实时调整时宜直接采用合成分派规则,尤其是规则EDD+FIFO,求解耦合问题时应综合考虑各种分派规则。可见,系统的功能、性能和技术指标均能满足股道运用智能编制和实时调整的现实需求。     

2010年西北太平洋热带气旋活动特征分析

为使船舶驾驶人员对西北太平洋海域热带气旋的生成和活动规律有所了解,利用2010年中国、日本发布的该海域热带气旋实况资料和气候资料进行统计和分析.分析结果表明2010年该海域热带气旋具有个数少,源地集中,位置偏西;登陆个数少,登陆比例大;登陆时间集中,登陆位置偏南等特点.2010年西北太平洋副热带高压异常强大、西伸脊点异...     

电压源供电电机负载电磁场分析技术

本文提出应用Ansys电磁分析模块,采用场路耦合时步瞬态有限元方法,直接对计算模型施加电压激励,得到电机的电流和负载磁场,该方法可直接应用到电机的起动计算和短路计算.     

规则波作用下有顶板开孔沉箱垂直波浪力试验研究

通过二维规则波波压力试验,在规则波作用下无顶板开孔沉箱波浪力研究的基础上,对规则波作用下有顶板开孔沉箱所受到的垂直波浪力进行了系统的研究。提出了有顶板开孔沉箱所受垂直波浪力的计算方法,为开孔沉箱的实际工程应用提供了有价值的结果。     

实心转子同步电动机起动过程研究

本文介绍了基于场一路一运动耦合的时步有限元法,并应用Ansofl软件,通过编辑电机绕组外部控制电路,实现了同步电动机的自动投励过程的仿真,分析了电机空载启动时的电磁参数。     

斜入射水波对直立防波堤的波浪渗流作用

基于Biot渗流固结理论和水波绕射理论,应用特征函数展开法,推导了对应直立防波堤的绕射波势和波浪引起的海床内渗流压力分布的解析式,由此计算了作用于直立防波堤底部上由波浪渗流压力所导致的浮托力和倾覆力矩,并与水平波浪力和力矩进行了相应比较。计算结果表明,在一定条件下,波浪渗流作用与水平波浪作用可以具有相同的量级。波浪入射角,防波堤前侧透空及海况条件防波堤几何尺寸等因素的相对变化对波浪渗流作用均存在一定的影响,其中对渗流倾覆力矩的影响更为明显。     

Vertical random vibration analysis of vehicle–track coupled system using Green's function method

A vertical vehicle–track coupled dynamic model, consisting of a high-speed train on a continuously supported rail, is established in the frequency-domain. The solution is obtained efficiently by use of the Green's function method, which can determine the vibration response over a wide range of frequency without any limitations due to modal truncation. Moreover, real track irregularity spectra can be used conveniently as input. The effect of the flexibility of both track and car body on the entire vehicle–track coupled dynamic response is investigated. A multi-body model of a vehicle with either rigid or flexible car body is defined running on three kinds of track: a rigid rail, a track stiffness model and a Timoshenko beam model. The results show that neglecting the track flexibility leads to an overestimation of both the contact force and the whole vehicle vibration response. The car body flexibility affects the ride quality of the vehicle and the coupling through the track and can be significant in certain frequency ranges. Finally, the effect of railpad and ballast stiffness on the vehicle–track coupled vibration is analysed, indicating that the stiffness of the railpad has an influence on the system in a higher frequency range than the ballast.     

Investigation of the effects of sleeper-passing impacts on the high-speed train

The sleeper-passing impact has always been considered negligible in normal conditions, while the experimental data obtained from a High-speed train in a cold weather expressed significant sleeper-passing impacts on the axle box, bogie frame and car body. Therefore, in this study, a vertical coupled vehicle/track dynamic model was developed to investigate the sleeper-passing impacts and its effects on the dynamic performance of the high-speed train. In the model, the dynamic model of vehicle is established with 10 degrees of freedom. The track model is formulated with two rails supported on the discrete supports through the finite element method. The contact forces between the wheel and rail are estimated using the non-linear Hertz contact theory. The parametric studies are conducted to analyse effects of both the vehicle speeds and the discrete support stiffness on the sleeper-passing impacts. The results show that the sleeper-passing impacts become extremely significant with the increased support stiffness of track, especially when the frequencies of sleeper-passing impacts approach to the resonance frequencies of wheel/track system. The damping of primary suspension can effectively lower the magnitude of impacts in the resonance speed ranges, but has little effect on other speed ranges. Finally, a more comprehensively coupled vehicle/track dynamic model integrating with a flexible wheel set is developed to discuss the sleeper-passing-induced flexible vibration of wheel set.