集装箱船弯扭耦合振动分析

本文基于薄壁结构力学基本理论，提出了一种适合于大开口集装箱船弯扭耦合振动分析的薄壁梁有限元模型。该模型考虑了翘曲、剪切及剖面转动的影响，以及货舱大开口和抗扭箱（甲板梁）引起的结构不连续性。其例中，计算结果与三维有限元分析结果、模型试验结果相当吻合，而薄壁梁有限元的计算效率要高得多，算例还表明抗扭箱（甲板梁）对提高集装箱船的抗扭刚度有十分重要的意义。     

抓斗吊车自动称重系统及其微机模拟调试

本文阐述了吊车自动称重系统的硬件原理及其有关的接口技术,提出了一种简便可行的称重计量方法和相应的软件设计方法,并说叫了微机模拟技术在调试中的作用和过程。     

基于虚拟试验方法的气囊折叠方式对离位乘员损伤影响的研究

基于MADYMO软件建立了对称折叠和环向折叠安全气囊以及假人碰撞位置的虚拟试验模型。试验结果表明：环向折叠气囊对人体的主要损伤值都小于对称折叠气囊的相应值;试验中测得的所有损伤值都小于损伤评定参考值,并和有关实际试验的结果基本相同。虚拟试验是一种研究气囊折叠方式对离位乘员损伤影响的有效方法。     

Ductile crack initiation behavior in steels with compressive prestrain

It is well known that compressive prestrain reduces ductility in steels. On the other hand, it has also been found that high stress triaxiality reduces equivalent plastic strain at the onset of ductile fracture. In this research, plate specimens and notched bar specimens, which were prestrained in compression with bending, were used in reversed bending tests, and the effect of compressive prestrain on ductile crack initiation in steels was investigated. It was found that small ductile cracks occurred from the microscopic wrinkles which were formed on the concave surface with compressive prestrain. The critical relationship between stress triaxiality and equivalent plastic strain at ductile crack initiation was investigated by finite-element analysis. It was found that ductile crack initiation in steels with compressive prestrain can be estimated qualitatively by the relationship between stress triaxiality and equivalent plastic strain.     

船尾桨前垂向整流鳍的减振机理研究及其应用

文章认为在船尾型线设计中若不考虑横剖线的UV度、各水线去流角大小等对船体振动的不利影响,很可能会导致艉部水流异常;螺旋桨盘面处非定常及分布不均匀的艉流将直接导致船体剧烈振动.针对发生了该类有害振动的船舶,介绍一种安装于船尾的垂向整流鳍.通过引用水动力不平衡导致螺旋桨激振力产生的基本原理,探讨垂向整流鳍整流使螺旋桨盘面处原艉流场发生有利改变的实质,揭示船尾桨前垂向整流鳍的减振机理.以实例说明该整流鳍在消除该类振动方面的突出效果.     

Three-dimensional vortex-induced vibrations of a circular cylinder predicted using a wake oscillator model

This paper reports a numerical study based on a wake oscillator model, to determine the three-dimensional vortex-induced vibration (VIV) responses on a flexible cylinder with pinned-pinned boundary conditions subjected to a uniform flow. Four different aspect ratios have been selected for the study. The coupling equations of the structural oscillator models and wake oscillator models in both the cross-flow (CF) and in-line (IL) directions have been solved using a standard central difference method of the second order. The structural displacement, structural frequency, response wave pattern, response trajectory, and lift force coefficient, for four aspect ratios, have been compared. The numerical results establish that, for a small aspect ratio, the CF displacements have absolute standing wave behaviors without travelling wave behaviors, and the IL displacements have dominant standing wave behaviors with slight travelling wave behaviors. Further, the VIV trajectory is repeatable and displays figure-eight shapes. However, for a large aspect ratio, the CF displacements display identical characteristics with the IL displacements for a small aspect ratio, and the IL displacements for a large aspect ratio are simultaneously dominated by standing and travelling wave behaviors. Moreover, the VIV trajectory is apparently aperiodic and shows chaotic shapes.     

Experimental investigation on vortex-induced force of a Steel Catenary Riser under in-plane vessel motion

A method to identify vortex-induced forces and coefficients from measured strains of a Steel Catenary Riser (SCR) undergoing vessel motion-induced Vortex-induced Vibration (VIV) is proposed. Euler–Bernoulli beam vibration equations with time-varying tension is adopted to describe the out-of-plane VIV responses. Vortex-induced forces are reconstructed via inverse analysis method, and the Forgetting Factor Least Squares (FF-LS) method is employed to identify time-varying vortex-induced force coefficients, including excitation coefficients and added mass coefficients. The method is verified via a finite element analysis procedure in commercial software Orcaflex. The time-varying excitation coefficients and added mass coefficients of an SCR undergoing vessel motion-induced VIV are investigated. Results show that vessel motion-induced VIV is excited at the middle or lower part of the SCR and in the acceleration period of in-plane velocity, where most of the excitation coefficients are positive, while during the deceleration period, the excitation coefficients becomes too small to excite VIVs. Parameter γ [1] has strong correlation with excitation coefficients. In addition, time-varying tensions contribute significantly to the variations of added mass coefficients under the condition that the ratio of dynamic top tension to pretension exceeds the range of 0.7–1.3. Moreover, chaotic behaviors are observed in vortex-induced force coefficients and are more evident with the increase of vessel motion velocity. This behavior may attribute to the randomness existing in in-plane velocity and its coupling with out-of-plane vibrations.     

水深对抛石强夯影响的模型试验研究

通过模型试验,探讨水深对重锤夯击抛石后夯沉率及抛石应力的影响,以及有、无水情况下抛石夯击夯沉率和抛石应力随落距的变化关系。试验研究成果表明：水面与抛石面齐平的情况与有水的夯击效果相近,为缩比尺模型试验中消除边界效应及水深影响提供了理论依据。     

三体船粘压阻力预报方法

三体船快速性的研究是三体船新船型开发技术的支撑。通过模型试验与数值模拟相结合的方法,对不同航速下三体船的粘压阻力进行计算。试验研究采用将三体船侧体分别放置在船中、船前部和船后部3个不同的纵向位置以及距船中心线3个距离不同的横向位置,测量9个侧体位置下三体船在静水中的总阻力。运用第八届ITTC公式计算摩擦阻力系数,进而算出剩余阻力系数。通过数值模拟的方法,基于细长体理论对三体船兴波阻力系数进行计算,再根据三因次换算方法计算粘压阻力系数。得出不同构型下三体船在静水中的粘压阻力系数,并作出其随Fr数变化的曲线,观察在侧体位置不同的情况下,三体船的粘压阻力系数随航速变化的规律。根据所得粘压阻力系数曲线,提出初步预报三体船粘压阻力系数的一种简单方法。     

板式无砟轨道交通引起的环境振动数值分析

利用已研究出的高速铁路动荷载,采用粘弹性边界,运用有限元法建立轨道-路基-大地二维动力分析模型,分析板式无砟轨道交通引起的振动在大地中的传播特性。计算分析表明:地表的振动强度随着离轨道中心线的距离增加而逐渐衰减。离轨道中心线近处,地表振动较强,而且加速度主要频段在20 Hz以上;离轨道中心线较远处,振动较小,加速度主要频段在10 Hz以下。随着离轨道中心距离的增加,加速度幅值随之减小,而且地表20 Hz以上的振动衰减得较快,10 Hz以下的振动衰减得较慢。