小型铣刨机车体升降油缸动态过程的分析

通过对小型铣刨机车体升降系统的简化,建立了液压缸运动速度与流量的传递函数,并且在系统参数静态设计方法的基础上,考虑了系统参数对其动态特性的影响.     

网络条件下高速公路收费费率优化方法研究

以区域公路网为研究对象,在分析高速公路收费费率与交通量之间关系的基础上,建立收费费率优化双层规划模型,兼顾经营者和使用者的利益,并考虑路网交通流分布,设计了模型的实用求解算法。该方法弥补了已有方法多以运输通道为研究对象的不足之处,可以在收费系数确定的情况下根据优化目标直接得到优化结果,具有较为广泛的适用性。     

Estimating traffic volumes for signalized intersections using connected vehicle data

Recently connected vehicle (CV) technology has received significant attention thanks to active pilot deployments supported by the US Department of Transportation (USDOT). At signalized intersections, CVs may serve as mobile sensors, providing opportunities of reducing dependencies on conventional vehicle detectors for signal operation. However, most of the existing studies mainly focus on scenarios that penetration rates of CVs reach certain level, e.g., 25%, which may not be feasible in the near future. How to utilize data from a small number of CVs to improve traffic signal operation remains an open question. In this work, we develop an approach to estimate traffic volume, a key input to many signal optimization algorithms, using GPS trajectory data from CV or navigation devices under low market penetration rates. To estimate traffic volumes, we model vehicle arrivals at signalized intersections as a time-dependent Poisson process, which can account for signal coordination. The estimation problem is formulated as a maximum likelihood problem given multiple observed trajectories from CVs approaching to the intersection. An expectation maximization (EM) procedure is derived to solve the estimation problem. Two case studies were conducted to validate our estimation algorithm. One uses the CV data from the Safety Pilot Model Deployment (SPMD) project, in which around 2800 CVs were deployed in the City of Ann Arbor, MI. The other uses vehicle trajectory data from users of a commercial navigation service in China. Mean absolute percentage error (MAPE) of the estimation is found to be 9–12%, based on benchmark data manually collected and data from loop detectors. Considering the existing scale of CV deployments, the proposed approach could be of significant help to traffic management agencies for evaluating and operating traffic signals, paving the way of using CVs for detector-free signal operation in the future.     

基于灰色残差GM（1，1）模型的道路交通量预测的研究

道路交通体系是一个多因素、多层次、多目标的复杂系统。其中交通量信息系统具有明显的层次复杂性,结构关系的模糊性,动态变化的随机性,指标数据的不完全和不确定性。由于技术方法、人为因素、自然环境变化的影响,造成各种数据误差、短缺甚至虚假现象,系统的作用机制不明确,系统的状态、结构、边界关系难以精确描述,属于典型的灰色系统。在作量化、模型化、实体化研究时,能作为反映系统主要动态特征的数据是很少的。由于环境对系统的干扰,系统信息中原始数据序列往往呈现离乱情况,离乱数列即为灰色数列或称灰色过程,灰色理论利用那些较少的或不确切的表示系统行为特征的原始数据序列作生成变换后建立微分方程,对灰色过程建立的模型称为灰色模型（Greymodel）,简称GM模型。本文从理论上介绍了GM（1,1）模型和灰色残差GM（1,1）模型建立的一般过程,然后将其应用于交通量预测的实际例子中。预测结果表明,该方法是可行的。     

关于城市轨道交通列车编组形式的探讨

城市轨道交通列车编组形式是确定轨道交通工程规模的重要原则之一。以预测客流量为依据,从行车运营的几个重要指标来分析、比较初期、近期、远期的3个列车编组方案,最后对列车编组方案进行论述,给相关工程提供借鉴。     

精轧螺纹吊底平台在大体积高桩墩台中的应用与创新

从工程实际出发,对墩台施工水上作业平台工艺进行对比分析,介绍精轧螺纹吊底平台的工艺特点、原理、流程及操作要点。结合全直桩基墩台结构特点,对桩基与上部结构连接方式的设计进行创新,在钢管桩外侧设置4块扇形钢板,并围焊成环形,与精轧螺纹吊底平台共同形成一种新型组合支承结构,提高吊底和底模的周转率,加快工程进度,确保大体积高桩墩台施工的安全和质量,经济和技术效益明显。可为类似墩台施工、钢管桩与上部结构连接方式设计提供参考。     

汽油机燃烧室紧凑性评价参数分析

对燃烧室紧凑性评价参数面容比A/V值进行了分析,讨论了其局限性。提出了新的内燃机燃烧室紧凑性的衡量方法,即面面比S/A,在等容积条件下,进行了各种燃烧室紧凑性及火焰传播距离的比较。     

城市轨道交通网络化客流特征及成长规律——基于京沪穗深城市轨道交通网络客流数据分析

中国各大城市轨道交通将陆续进入网络化运营阶段,然而对于网络化进程中客流特征及成长规律尚缺乏深入细致的分析与研究。对北京、上海、广州、深圳4个城市轨道交通网络化进程中的客流特征及成长规律进行系统总结,涉及客运量及客运强度、断面客流量分布、线网换乘系数、乘距与运距、客流时间分布等。同时,针对轨道交通沿线土地利用、线网规模、服务水平、票制票价等影响客流特征变化的主要因素进行分析。在此基础上,对当前中国城市轨道交通规划、建设、运营组织的若干关键问题提出建议。     

装配式桩基码头设计建造应用现状与展望

针对水运工程高桩梁板式桩基码头设计建造过程中存在的构件标准化及装配化程度差、施工效率低等问题,分析装配式桩基码头设计建造应用现状,总结装配式桩基码头结构体系的基本特点、模式及连接方式,提出装配化程度指标构件装配率和体积装配率概念,并根据实际工程案例得出传统高桩码头的装配率指标。     

Empirical analysis of short period traffic counts and their efficiency: the case of Indian traffic

Short period traffic counts (SPTCs) are conducted routinely to estimate the annual average daily traffic (AADT) at a particular site. This paper uses Indian traffic volume data to methodically and extensively study the effect of four aspects related to the design of SPTCs. These four aspects are: (i) for how long, (ii) on which days should SPTCs be carried out, (iii) how many times, and (iv) on which months should SPTCs be carried out? The analyses indicate that the best durations for conducting SPTCs are 3 days (starting with a Thursday) and 7 days, for total traffic and truck traffic, respectively. Further, these counts should be repeated twice a year keeping a separation of two months between the counts to obtain good estimates of AADT at minimal cost. An additional outcome of this study has been the determination of seasonal factor values for roads in developing economies, like India.