Optimal locations and travel time display for variable message signs

This paper first develops a network equilibrium model with the travel time information displayed via variable message signs (VMS). Specifically, the equilibrium considers the impact of the displayed travel time information on travelers’ route choices under the recurrent congestion, with the endogenous utilization rates of displayed information by travelers. The existence of the equilibrium is proved and an iterative solution procedure is provided. Then, we conduct the sensitivity analyses of the network equilibrium and further propose a paradox, i.e., providing travel time information via VMS to travelers may degrade the network performance under some poor designs. Therefore, we investigate the problem of designing the VMS locations and travel time display within a given budget, and formulate it as a mixed integer nonlinear program, solved by an active-set algorithm. Lastly, numerical examples are presented to offer insights on the equilibrium results and optimal designs of VMS.     

Train rescheduling model with train delay and passenger impatience time in urban subway network

This paper considers the train rescheduling problem with train delay in urban subway network. With the objective of minimizing the negative effect of train delay to passengers, which is quantified with a weighted combination of travel time cost and the cost of giving up the planned trips, train rescheduling model is proposed to jointly synchronize both train delay operation constraints and passenger behavior choices. Space–time network is proposed to describe passenger schedule‐based path choices and obtain the shortest travel times. Impatience time is defined to describe the intolerance of passengers to train delay. By comparing the increased travel time due to train delay with the passenger impatience time, a binary variable is defined to represent whether the passenger will give up their planned trips or not. The proposed train rescheduling model is implemented using genetic algorithm, and the model effectiveness is further examined through numerical experiments of real‐world urban subway train timetabling test. Duration effects of the train delay to the optimization results are analyzed. Copyright © 2017 John Wiley & Sons, Ltd.     

Quantifying travel time variability at a single bottleneck based on stochastic capacity and demand distributions

Travel time reliability, an essential factor in traveler route and departure time decisions, serves as an important quality of service measure for dynamic transportation systems. This article investigates a fundamental problem of quantifying travel time variability from its root sources: stochastic capacity and demand variations that follow commonly used log-normal distributions. A volume-to-capacity ratio-based travel time function and a point queue model are used to demonstrate how day-to-day travel time variability can be explained from the underlying demand and capacity variations. One important finding is that closed-form solutions can be derived to formulate travel time variations as a function of random demand/capacity distributions, but there are certain cases in which a closed-form expression does not exist and numerical approximation methods are required. This article also uses probabilistic capacity reduction information to estimate time-dependent travel time variability distributions under conditions of non-recurring traffic congestion. The proposed models provide theoretically rigorous and practically useful tools for understanding the causes of travel time unreliability and evaluating the system-wide benefit of reducing demand and capacity variability.     

Classification of Livebus arrivals user behavior

With the increasing use of Intelligent Transport Systems, large amounts of data are created. Innovative information services are introduced and new forms of data are available, which could be used to understand the behavior of travelers and the dynamics of people flows. This work analyzes the requests for real-time arrivals of bus routes at stops in London made by travelers using Transport for London's LiveBus Arrivals system. The available dataset consists of about one million requests for real-time arrivals for each of the 28 days under observation. These data are analyzed for different purposes. LiveBus Arrivals users are classified based on a set of features and using K-Means, Expectation Maximization, Logistic regression, One-level decision tree, Decision Tree, Random Forest, and Support Vector Machine (SVM) by Sequential Minimal Optimization (SMO). The results of the study indicate that the LiveBus Arrivals requests can be classified into six main behaviors. It was found that the classification-based approaches produce better results than the clustering-based ones. The most accurate results were obtained with the SVM-SMO methodology (Precision of 97%). Furthermore, the behavior within the six classes of users is analyzed to better understand how users take advantage of the LiveBus Arrivals service. It was found that the 37% of users can be classified as interchange users. This classification could form the basis of a more personalized LiveBus Arrivals application in future, which could support management and planning by revealing how public transport and related services are actually used or update information on commuters.     

罕遇地震作用下高速铁路减隔震简支梁桥合理计算模型的探讨

以往在分析减隔震桥梁的地震响应时,由于考虑到桥墩和基础应保持弹性工作状态,在基于强度的设计中偏于安全考虑桥墩一般采用毛截面刚度建立弹性梁单元模型。实际上,在罕遇地震作用下,桥墩墩底截面虽然未达到屈服状态,仍然会出现保护层混凝土开裂,并导致桥墩刚度降低。此时,应考虑对桥墩刚度进行适当修正以估计桥梁的各项地震响应参数,这也有利于实现减隔震桥梁基于位移的抗震设计。结合西部高速铁路中典型的简支梁桥结构形式,分别采用弹塑性纤维梁柱单元、弹性梁柱单元、考虑刚度修正的弹性梁柱单元模拟桥墩建立3种计算模型,探讨适用于罕遇地震作用下的高速铁路减隔震桥梁的合理计算模型。结果表明,当罕遇地震作用下桥墩位移延性超过0.5时,考虑刚度修正的弹性梁柱单元模拟桥墩的计算模型能够较好地估计桥梁各项地震响应参数。     

Passenger waiting time and information acquisition using automatic vehicle location for verification

Bus riders utilize a variety of information media to learn how to travel to their destinations and to learn when they should arrive at bus stops. As part of the OCTA (Orange County Transit Authority) Transit Probe evaluation, 1199 passengers were surveyed to measure relationships between information acquisition and waiting time. A unique aspect of the survey was that some of the data could be correlated with automatic‐vehicle‐location (AVL) measurements of bus lateness at stops. Insights are provided as to the types of information riders acquire based on the nature of the trip and demographic characteristics. Insights are also provided as to factors affecting perceived waiting time. We found age group, whether a person needs to arrive at a destination by a specific time, primary language, and whether the person is a first‐time user of the bus line to be significant causal factors.     

半刚性路面基层养生期的试验研究

分析了缩短半刚性路面基层养生的机理,解决了半刚性路面基层常规7d养生期耗费大、工期长、遇雨行车影响路面平整度和质量,因洒水养生干、湿交替产生的干缩裂缝,与沥青面层结合不好、抗剪力差、行车易产生推移变形等技术难题.降低了工程造价,取得明显的社会、经济效益.     

Roads in transition: Integrated modeling of a manufacturer-traveler-infrastructure system in a mixed autonomous/human driving environment

This paper develops an integrated model to characterize the market penetration of autonomous vehicles (AVs) in urban transportation networks. The model explicitly accounts for the interplay among the AV manufacturer, travelers with heterogeneous values of travel time (VOTT), and road infrastructure capacity. By making in-vehicle time use more leisurely or productive, AVs reduce travelers’ VOTT. In addition, AVs can move closer together than human-driven vehicles because of shorter safe reaction time, which leads to increased road capacity. On the other hand, the use of AV technologies means added manufacturing cost and higher price. Thus, traveler adoption of AVs will trade VOTT savings with additional out-of-pocket cost. The model is structured as a leader (AV manufacturer)-follower (traveler) game. Given the cost of producing AVs, the AV manufacturer sets AV price to maximize profit while anticipating AV market penetration. Given an AV price, the vehicle and routing choice of heterogeneous travelers are modeled by combining a multinomial logit model with multi-modal multi-class user equilibrium (UE). The overall problem is formulated as a mathematical program with complementarity constraints (MPCC), which is challenging to solve. We propose a solution approach based on piecewise linearization of the MPCC as a mixed-integer linear program (MILP) and solving the MILP to global optimality. Non-uniform distribution of breakpoints that delimit piecewise intervals and feasibility-based domain reduction are further employed to reduce the approximation error brought by linearization. The model is implemented in a simplified Singapore network with extensive sensitivity analyses and the Sioux Falls network. Computational results demonstrate the effectiveness and efficiency of the solution approach and yield valuable insights about transportation system performance in a mixed autonomous/human driving environment.     

Estimating the bus user time benefits of implementing a median busway: Methodology and case study

This paper presents a general framework to estimate the bus user time benefits of a median busway including the effects on travel time and access time. Unlike previous models, we take into account the effects of geometry and the interaction with the demand structure. Models for predicting the bus in-vehicle time benefits of a median dual carriageway busway against mixed traffic condition on 2 and 3 lanes roads are estimated using data from a case study in Santiago (Chile), using a bus travel time model empirically estimated and considering different base case situations, including mixed traffic operations and bus lanes. Results of the application show that the expected in-vehicle time savings of a median busway might be reduced by access time losses due to increased walking distances and road crossing delays. Also, that net time benefits can vary significantly according to the base situation and the structure of demand considered. These findings point out to the need of including a wider set of impacts when studying the benefits of median busways, beyond in-vehicle time savings only. The empirical work presented here is completely based on passive data coming from GPS and smartcards, what makes easier and cheaper to conduct this type of analysis as well as to do it with a comprehensive scope at an early stage of the development of a BRT project. This framework can be extended to other types of dedicated bus lanes provided that a corresponding bus travel time savings model is available.