首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   5211篇
  免费   472篇
公路运输   1843篇
综合类   1073篇
水路运输   1886篇
铁路运输   634篇
综合运输   247篇
  2024年   53篇
  2023年   61篇
  2022年   104篇
  2021年   193篇
  2020年   224篇
  2019年   145篇
  2018年   130篇
  2017年   140篇
  2016年   127篇
  2015年   205篇
  2014年   404篇
  2013年   330篇
  2012年   472篇
  2011年   485篇
  2010年   384篇
  2009年   314篇
  2008年   334篇
  2007年   462篇
  2006年   370篇
  2005年   247篇
  2004年   124篇
  2003年   105篇
  2002年   58篇
  2001年   46篇
  2000年   42篇
  1999年   14篇
  1998年   35篇
  1997年   18篇
  1996年   11篇
  1995年   3篇
  1994年   9篇
  1993年   8篇
  1992年   9篇
  1991年   3篇
  1990年   5篇
  1989年   1篇
  1988年   1篇
  1986年   3篇
  1985年   1篇
  1984年   3篇
排序方式: 共有5683条查询结果,搜索用时 62 毫秒
191.
盾构法联络通道密封垫设计及防水试验研究   总被引:1,自引:0,他引:1  
为探究适合盾构法联络通道工程的密封垫断面形式,以宁波市轨道交通3号线第1条盾构法联络通道为工程背景,针对遇水膨胀橡胶设计阴阳凹凸、圆形孔洞、梳形、矩形等4类断面。对各断面形式进行可行性分析,选取阴阳凹凸断面与矩形断面作为初选方案。利用Abaqus/Explicit计算模块对2种断面的接触应力进行有限元分析,通过设计“一”字缝耐水压力试验,验证数值模拟中接触应力较大的矩形断面的防水能力。研究表明: 1)数值模拟结果显示,接触面最大接触应力与平均接触应力均随着张开量的增加而减小; 同等张开量与错台量下,在压缩与膨胀2个阶段中,矩形断面的接触应力均大于阴阳凹凸断面,因此选取矩形断面作为备选方案。2)“一”字缝耐水压力试验结果表明,矩形断面密封垫保压48 h后耐水压力明显提升,且张开量越大耐水压力提升幅度越大。3)综合数值模拟与试验结果可知,该矩形断面密封垫满足0.6 MPa的防水要求。  相似文献   
192.
李玉涛  张彬  石磊  彭振华  李俊彦 《隧道建设》2019,39(8):1308-1318
为研究垂直水幕对扩建地下水封油库布局方式的影响,以某大型地下水封洞库分期建设工程为依托,采用有限元数值模拟方法,对有、无垂直水幕条件下扩建洞库的布局方式进行研究。研究结果表明: 1)当两期洞库间距较小时,在两期洞库之间设置垂直水幕可有效削弱拟建洞库对已建洞库水封可靠性的影响,随两期洞库间距的增加,垂直水幕的影响性逐渐减弱; 2)拟建洞库轴线方向对水封可靠性的影响受地形等条件的影响较大,在两期洞库之间设置垂直水幕对水封可靠性的影响较小; 3)随拟建洞库埋深的增加,拟建洞库的水封可靠性逐渐增强,已建洞库的水封可靠性却呈逐步减小趋势,在两期洞库之间设置垂直水幕可有效减小埋深对两期洞库水封可靠性的影响。  相似文献   
193.
为有效解决船用中厚钢板复杂曲面加工问题,研究空气冷却(空冷)、正面水冷和反面水冷方式对大尺寸钢板弯曲成形的影响因素。首先采用COMSOL Multiphysics仿真平台模拟电磁感应加热和冷却变形多物理场同步耦合过程,然后分析各种因素对大尺寸钢板弯曲成形的影响,最后通过试验验证有限元模型的可靠性,并对感应加热弯曲成形效果进行评估。结果表明:相对于水冷,空气冷却对钢板Y向位移改变效果显著;相对于空气冷却,水冷对钢板角位移的改变影响明显;当频率为50 k Hz时,电流频率对表面温度和角位移影响显著;当钢板长宽比不小于1∶2时,Y向位移的增加比较显著;当长宽比约为1∶1时,角位移的改变比较明显。  相似文献   
194.
Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.  相似文献   
195.
The circulation system of a slurry shield is composed of a transportation system and a processing system.For shield construction, correct selection of the circulation system for the slurry shield is directly related to construc-tion speed. Using the Nanjing Yangtze tunnel as an example, the material balance calculation of the circulation sys-tem, sieving effect analysis, and analysis of the muck carrying ability of the dredging pipe are conducted for various strata. The practical results show that above mentioned calculations and analysis method provide a good reference for the proper selection of a slurry separation system and dredge pipe. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.  相似文献   
196.
In order to study the diffusion law of grouting slurry in the water-rich sand layer under flowing water conditions, a grouting test model consisting of a main test system, a grouting system, and a measurement system was developed. And for detecting the diffusion scope of the grouts, a new resistivity method was proposed. It is found that the relationship between grouting pressure and grouting rate during the test is strong. Under hydrodynamic conditions, the grouting slurry diffuses elliptically. Due to gravity and the effect of the upper water flow, the center of gravity of the ellipsoid is below the grouting outlet, and the grouting effectively improves the physical and mechanical properties of water-rich sand bodies. At the same time, the resistivity method has a good application effect on the detection of grouting diffusion range. The range of slurry diffusion obtained by the resistivity method is basically consistent with the boundary of the stone body after excavation, indicating that the resistivity method is reliable for detection of grouting range in dynamic water-rich sand layer. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.  相似文献   
197.
Gong C.  Luo Y.  Zhang J. 《现代隧道技术》2018,(6):210-216and221
Defects of tunnel lining, such as inadequate thickness, voids, cracks, rock falling and water leakage etc., endanger the safety of railway tunnel operation. Based on the site construction, an analysis of the reasons for lining defects was conducted; technical measures against lining defects were proposed and tests were carried out at site. The results show that these measures are reliable and effective, and the purposes of prevention and treatment are re⁃ alized. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.  相似文献   
198.
油田注水管线所输送介质复杂,腐蚀现象严重,存在安全隐患,一旦因腐蚀泄漏就会造成巨大的经济损失。因此,开展油田注水管道的腐蚀研究及采取措施减缓腐蚀具有重要意义。为此,对某油田注水管道现场采集注入水样及腐蚀产物,通过X-射线衍射及X-射线能谱仪进行分析,分析结果表明腐蚀产物主要是碳酸钙,同时含有一定量的氯化物、碳酸亚铁、硫化物等成分。通过电镜扫描腐蚀产物的微观形貌,发现存在氯离子腐蚀。并通过ICP-OES分析输送介质组分,针对其腐蚀特点及输送介质组分,采用失重法及电化学方法评价了引入季铵盐的咪唑啉缓蚀剂HJD2最佳质量分数及缓蚀机理,实验结果表明该缓蚀剂对该注水管道具有较好的缓蚀作用,在现场注水温度下,最佳质量分数(0.06%)时的缓蚀效率为95.1%,通过注入该缓蚀剂可以有效地减缓该注水管线的腐蚀,延长管线的使用寿命。  相似文献   
199.
针对高速船尾部采用喷水推进装置的局部振动问题,建立了船体尾部包含喷水推进泵的有限元模型。考虑附连水质量的影响,将船体尾部离散成甲板,底板,喷水推进泵,尾板等局部结构,采用规范经验公式估算以及有限元分析的方法分别对各局部结构的板、板格、板架进行固有频率计算,将其结果与轴频和叶频激励频率进行储备频率校核,判断尾部采用喷水推进装置在振动问题上是否满足规范标准,并为下一步的船体设计提供参考。  相似文献   
200.
不同冷却方式对大尺寸钢板感应加热成形的影响   总被引:1,自引:1,他引:0  
为有效解决船用中厚钢板复杂曲面加工问题,本文探究了空气冷却、正面水冷和反面水冷方式对大尺寸钢板弯曲成型的影响因素。首先采用COMSOL Multiphysics仿真平台模拟了电磁感应加热和冷却变形多物理场同步耦合过程,然后分析了各种因素对大尺寸钢板弯曲成型影响,最后通过实验验证了有限元模型的可靠性,并对感应加热弯曲成型效果进行评估。研究结果表明:(1)相对于水冷,空冷对钢板Y向位移改变效果显著。(2)相对于空冷,水冷对钢板角位移的改变影响明显。(3)当频率为50kHz时,电流频率对表面温度和角位移影响显著。(4)当钢板长宽比≥1:2时,Y向位移的增加比较显著;当长宽比≈1:1时,角位移的改变比较明显。  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号