基于加权相对熵的二阶马尔可夫模型的进化树重构

利用加权相对熵的二阶马尔可夫模型的基本原理,对DNA序列进行比较.DNA序列由4个字符A、T、C、G构成的序列,将其视为一个马尔可夫链,取状态空间Ι={A,T,C,G},使用二阶转移概率矩阵来描述DNA序列,得到DNA序列的特征值,进而利用特征值定义DNA序列的相似性度量,得到能够对DNA序列进行比较的新方法,并利用这个方法对30个物种的线粒体DNA序列进行分类,通过加权相对熵得到距离矩阵的非比对方法构建的进化树划分更加清晰,准确度更高.     

A three-stage least squares approach to the analysis of airline strategies for aircraft size and airline frequency on the north Atlantic: an airline case study

In response to increasing demand, airlines may increase capacity by increasing the frequency of flights or they may choose to increase aircraft size. This may yield operating cost economies. If the airports they operate from are capacity constrained, they will be limited in the extent that they can change frequency which will limit their ability to compete with the number of frequencies offered. This article focuses on this trade-off and pays particular attention to the practices of a specific airline. Conclusions are offered on the impact of inter alia competition, changes in aircraft technology, 9/11 and the impact of slot constraints. It appears that changes in size are more important than frequency, which is consistent with the presence of slot constraints and there is a significant impact of competition. As the concentration of carriers increases, so aircraft size falls. 9/11 also has a significant impact on traffic whereas the introduction of the Boeing 777, as an illustration of a change in technology, does not.     

多腔穿孔型宽频消声器声学特性的理论计算与优化

多腔穿孔型消声器可衰减涡轮增压发动机进气系统工作时产生的宽频噪声。本文根据将多腔消声器视为若干单腔消声元件串联而成的思路,结合单腔穿孔声阻抗模型,提出多腔消声器的声学计算方法,并以某多腔穿孔消声器为例,预测其传递损失。实验验证表明该计算方法在计算传递损失方面具有较高的精度。然后在此基础上,设定优化目标,选定3种不同优化变量的组合模式,采用非线性最小二乘法进行优化。结果表明,不同优化模式均可满足目标要求,可灵活地确定符合工程实际的最佳方案。所提出的方法可为增压发动机进气系统声学设计提供理论支撑和应用指导。     

基于LMS和SDP的发动机异响诊断方法研究

为有效提取发动机声信号特征,以诊断发动机的异响,提出了一种以最小均方算法和对称点图形算法相结合的发动机异响诊断方法。采用最小均方算法去除信号中的噪声,还原发动机声信号,而利用SDP图形技术将信号转换为极坐标图形,得以判断发动机是否产生异响。通过仿真与试验,验证了该方法的有效性。     

基于三阶段最小二乘法探究诱增交通量

在诱增交通量的预测中,中国现有统计数据在精度和广度上的局限性,容易造成计算结果存在遗漏变量偏误和测量误差偏误;同时变量之间的相关性容易导致计算结果存在联立性问题。为克服这些问题,采用工具变量法中的三阶段最小二乘法探讨道路供给与交通需求之间的关系。基于国家统计数据库数据,选择车辆出行距离、民用汽车拥有量和交通拥堵水平三个内生变量构建联立方程模型,采用三阶段最小二乘法对联立方程进行估计,并给出短期、长期弹性系数的求解方法。结果表明,道路建设会导致车辆出行距离增加,不能解决中国城市交通拥堵问题,而大力发展公共交通可以降低交通拥堵水平。     

基于遗传算法的近红外光谱建模样品集优化研究

探讨遗传算法优化方法在南丰蜜橘内部品质可溶性固形物的建模集样品选择中的应用,根据优化结果建立了南丰蜜橘可溶性固形物的快速无损检测数学模型。研究选择的波长范围为350—1800nm,应用遗传算法优化建模集样品,优化后建模集样品数量由89个减少到36个,累积变异系数达到99．99％,交互验证均方根误差达到最小。研究结果表明：优化后的建模样品数量大大减少,且保证了南丰蜜橘可溶性固形物的快速无损检测数学模型的稳定性。     

Least Squares Support Vector Machine Based Real-Time Fault Diagnosis Model for Gas Path Parameters of Aero Engines

Least squares support vector machine (LS-SVM) is applied in gas path fault diagnosis for aero engines.Firstly,the deviation data of engine cruise are analyzed.Then,model selection is conducted using pattern search method.Finally,by decoding aircraft communication addressing and reporting system (ACARS) report,a real-time cruise data set is acquired,and the diagnosis model is adopted to process data.In contrast to the radial basis function (RBF) neutral network,LS-SVM is more suitable for real-time diagnosis of gas turbine engine.     

Constrained submap algorithm for simultaneous localization and mapping

When solving the problem of simultaneous localization and mapping (SLAM), a standard extended Kalman filter (EKF) is subject to linearization errors and causes optimistic estimation. This paper proposes a submap algorithm, which builds a weighted least squares (WLS) constraint between two adjacent submaps according to the different estimations of the common features and the relationship between the vehicle poses in the corresponding submaps. By establishing the constraint equation after loop closing, re-linearization is implemented and each submap’s reference frame tends to its equilibrium position quickly. Experimental results demonstrate that the algorithm could get a globally consistent map and linearization errors are limited in local regions.     

基于边界点云数据的3次B样条曲线拟合

点云边界特征线是指能够表达实物样件原始边界特征的测量点。边界不仅作为表达曲面的重要几何特征,而且作为求解曲面的定义域,对重建曲面模型的品质和精度起着重要作用。提出空间点云边界提取方法获取边界点云数据,然后通过“构造树型特征链”和3次B样条算法实现边界点云数据曲线拟合。     

基于GIS公交查询系统的设计与实现

本文充分考虑了乘客出行心理后,设计了以换乘次数最少和出行耗时最少作为约束目标的公交出行最优路径算法。利用动态分段技术建立了公交信息数据库,采用Visualc#．NET＋MapX5．0集成开发的方式开发了公交信息查询系统,实现了输入查询或直接对地图操作来获得出行最优路线和换乘方案。系统以济南市公交网络为基础进行了测试,测试结果良好,为居民的出行提供了一个方便、快捷的公交路线查询平台。