海洋石油平台余热利用研究

东海某DPP平台投产近十五年后,出现设备老化、工艺系统处理量发生变化等情况,从而透平电站、热油锅炉和工艺处理系统出现余热,如何减少能源浪费,及时有效回收利用,需要及时解决问题。通过对基础资料分析研究、平台生产实地调研,提出余热利用方案,并进行成本投资/回报比较,最终验证了方案的正确性。     

地铁通风小系统风机送电调试的探讨

通过6个案例分析,从不同调试故障的处理方法,归纳出3类常见调试问题,进而提出分3步进行的送电调试,为快速、高效地完成通风小系统风机送电调试任务提供了一条可行的便利途径。     

铁路瓦斯隧道施工特点及问题探讨

通过对铁路瓦斯隧道现有施工规范分析,并参考《煤矿安全规程》,对铁路瓦斯隧道施工特点进行总结;同时通过对相关条款的分析、研究,并对照国内已发生的瓦斯隧道施工、低瓦斯矿井生产事故,对现有规范中存在的问题进行探讨,提出以下建议：1) 进一步明确进洞管理系统的标准和要求;2) 进一步明确和细化瓦斯隧道电力供应原则;3) 进一步明确和改进瓦斯隧道机电设备防爆性配备的原则和相关条款。     

Dynamics of railway wagons subjected to braking torques on defective tracks

It is well known that track defects cause profound effects to the dynamics of railway wagons; normally such problems are examined for cases of wagons running at a constant speed. Brake/traction torques affect the speed profile due to the wheel–rail contact characteristics but most of the wagon–track interaction models do not explicitly consider them in simulation. The authors have recently published a model for the dynamics of wagons subject to braking/traction torques on a perfect track by explicitly considering the pitch degree of freedom for wheelsets. The model is extended for cases of lateral and vertical track geometry defects and worn railhead and wheel profiles. This paper presents the results of the analyses carried out using the model extended to the dynamics of wagons containing less ideal wheel profiles running on tracks with geometry defects and worn rails.     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

Indirect method for wheel–rail force measurement and derailment evaluation

Wheel set flange derailment criteria for railway vehicles are derived and the influence of wheel–rail contact parameters is studied. An indirect method for wheel–rail force measurement based on these derailment evaluation criteria is proposed. Laboratory tests for the calibration of strain–force devices on the bearing box are carried out to determine the relationship between the applied force and the measured strain. The simulation package, SIMPACK, is used to develop a passenger car model to generate wheel–rail forces and vibration signals. Different cases are considered in this model to provide an accurate validation of the identified wheel–rail forces. A feasibility test is conducted in the Beijing Loop test line using a passenger car equipped with a set of strain gauges on the wheel set. The comparison of the force time history applied to the instrumented wheel set and that obtained using the indirect method is presented.     

鱼雷航速航程与动力电池功率容量的关系

本文讨论电动鱼雷主要性能参数与其动力电池参数之间的关系。提出了综合功率系数概念及计算方法。综合功率系数愈小，推进系统的整体性能愈好。提高功率密度特别是提高体积功率密度对于减小综合功率系数非常重要。     

船舶电站控制系统中的数据融合技术探讨

船舶电站是船舶电力系统的重要组成部分。随着电力电子设备在船舶中的大量应用,非线性负载的增多,对船舶电站控制的可靠性及故障预防提出了更高的要求。多传感器数据融合技术是近年发展起来的一门新兴技术,文章根据多传感器数据融合技术的基本思想,采用扩张的卡尔曼滤波法对电站参数进行冗余数据融合,在船舶电站控制的实时性和可靠性方面取得了较好的效果。     

含损伤加筋板结构辐射声功率及指向性变异研究

本文采用结构声振特性中常用参数辐射声功率和辐射指向性来研究含损伤加筋结构的声辐射特性,计算不同加筋情况和结构不同损伤情况下的辐射声功率和远场指向性.基于Mindlin理论,建立描述健康和损伤的四结点有限元板壳单元模型,采用有限元方法计算结构表面动力响应.针对各向同性损伤单元,采取刚度各向整体弱化的方法分析;对于各向异性损伤单元,采用Kachanov理论,引入了x和y两个方向的弹性损伤折减系数.根据Rayleigh积分可以计算结构振动向外辐射的声压,进而可以得到辐射声功率和辐射指向性.考虑到不同损伤存在形式,计算分析了损伤对振动频率、模态以及辐射声功率和指向性的影响.文章建立了一种含损结构的分析方法,通过对一些典型算例分析,在评价损伤对船舶与海洋结构物常用的加筋结构声辐射特性影响方面做出了一定的探索.     

遗传算法在船舶动力机械混合隔振系统优化设计中的应用

阐明了混合隔振问题的实质就是综合被动隔振系统和主动控制系统的多目标联合优化设计.运用子结构导纳综合法分析了应用混合隔振技术的双层隔振系统的功率流传递特性.采用遗传算法对混合隔振系统进行了优化设计,并作了数值仿真.