Nonlinear three-dimensional wagon-track model for the investigation of rail corrugation initiation on curved track

A nonlinear wagon-track model on curved track has been developed to characterize rail corrugation formation due to self-excitation of the wheel-rail stick-slip process. In this model, wagon movements were described using up to 78 degrees of freedom (DOFs) to model a three-piece freight bogie. Innovatively, the wheelset movements are described using nine DOFs, including torsional and bending modes about the longitudinal and vertical directions. The track modelling is considered as a one-layer structure (two rail beams on discrete spring and damper elements). The wheel sliding after creepage saturation is considered in the wheel-rail interface modelling. Simulation of a case study shows that the frequencies of the wheel stick-slip process are composed of the basic frequency, which might come from the combined effect of sleeper-passing frequency and one-third of the combined torsional and bending frequency of the wheelset, and the double and triple basic frequencies, which form the wavelengths of rail corrugation at different situations.     

抚鲅线喂油泵振动频谱应用

在管输企业内很多机泵是用软性方法对轮胶皮联接的.胶皮具有易损和老化等特性,振动图谱上也不同于刚性联接.以抚鲅线首站喂油泵为例对其进行跟踪研究,发现软性联接具备工频弱化和1.5倍频出现峰值等特点.因此软性联接振动图谱的研究是对目前频谱监测方法的有效补充.     

FEM/BEM在轮胎振动和噪声特性分析中的应用

基于ABAQUS和SYSNOISE程序,给出了分析轮胎振动和噪声特性的有限元和边界元模型及完整方法（FEM/BEM）,并以此模型和方法对某半钢子午胎进行了模态分析,计算其在激励作用下的辐射声场.计算结果表明,只要有通过试验获得的轮胎在滚动过程中所受到的真实激励谱,利用本文的方法即可对轮胎的振动噪声进行预报.     

用MATLAB计算发动机悬置系统的固有频率和主振型

介绍了计算发动机橡胶悬置系统固有频率和主振型的过程,利用MATLAB编程并验证程序的正确性。通过程序的运行,能快速获得悬置振动系统的固有特性,为设计人员判断悬置系统是否会发生共振提供理论依据,也为进一步分析系统的响应打下了必要的基础。     

CFC复频电导法与TEM瞬变电磁法在某隧道中的应用对比

CFC复频电导法与TEM瞬变电磁法是我国目前较为先进的隧道超前探水技术。以CFC与TEM在我国某铁路隧道中的应用为例,简述CFC与TEM的方法原理,并结合开挖实际情况进行对比。试验对比表明,CFC探水技术抗干扰能力更强,探水预报结果更为准确,特别是在电磁环境复杂的隧道。     

变频调速技术在催化裂化装置机泵中的应用

简要介绍了变频调速技术,重点分析了与阀门调节相比,变频调速器的节能效果,比较了变频调速器应用前后机泵的运行周期和采用阀门调节与变频调速调节两种方式的节能效益,同时分析了控制方案的不同对节能效果的影响.     

Parameters optimisation of a vehicle suspension system using a particle swarm optimisation algorithm

The purpose of this paper is to determine the lumped suspension parameters that minimise a multi-objective function in a vehicle model under different standard PSD road profiles. This optimisation tries to meet the rms vertical acceleration weighted limits for human sensitivity curves from ISO 2631 [ISO-2631: guide for evaluation of human exposure to whole-body vibration. Europe; 1997] at the driver's seat, the road holding capability and the suspension working space. The vehicle is modelled in the frequency domain using eight degrees of freedom under a random road profile. The particle swarm optimisation and sequential quadratic programming algorithms are used to obtain the suspension optimal parameters in different road profile and vehicle velocity conditions. A sensitivity analysis is performed using the obtained results and, in Class G road profile, the seat damping has the major influence on the minimisation of the multi-objective function. The influence of vehicle parameters in vibration attenuation is analysed and it is concluded that the front suspension stiffness should be less stiff than the rear ones when the driver's seat relative position is located forward the centre of gravity of the car body. Graphs and tables for the behaviour of suspension parameters related to road classes, used algorithms and velocities are presented to illustrate the results. In Class A road profile it was possible to find optimal parameters within the boundaries of the design variables that resulted in acceptable values for the comfort, road holding and suspension working space.     

电控气缸注油器注油调频控制机理分析

为实现电控气缸注油器的注油调频控制,探究其注油调频的计算方法,提出注油调频的通用计算公式,分析该计算公式在研发电控气缸注油器注油调频机理上的适用方法。     

The Downs–Thomson Paradox with responsive transit service

Downs (1962) and Thomson (1977) suggested that highway capacity expansion may produce counterproductive effects on the two-mode (auto and transit) transport system (Downs–Thomson Paradox). This paper investigates the occurrence of this paradox when transit authority can have different economic objectives (profit-maximizing or breakeven) and operating schemes (frequency, fare, or both frequency and fare). For various combinations of economic objectives and operating schemes, the interaction between highway expansion and transit service is explored, as well as its impact on travelers’ mode choices and travel utilities. Further, for each combination, the conditions for occurrence of the Downs–Thomson Paradox are established. We show that the paradox never occurs when transit authority is profit-maximizing, but it is inevitable when the transit authority is running to maximize travelers’ utility while maintaining breakeven. This is because the former transit authority tends to enhance transit service (e.g., raise frequency or reduce fare) when facing an expanded highway; and on the contrary, the latter tends to compromise transit service (e.g., reduce frequency or raise fare). Both analytical and numerical examples are provided to verify the theoretical results.