基于AR模型的并靠两船相对运动预报研究

根据两船相对运动的特点,利用两船模相对运动的测量数据,运用基于自回归模型的时间序列分析法,建立了两船相对运动的数学模型,并给出了运动姿态的预报值.通过本方法的研究,可以得到满意的相对运动预报精度,为两船补给波浪、补偿装置的开发打下了理论基础.     

BIM技术在铁路预应力混凝土连续梁零号节段深化设计中的应用

近年来,部分铁路预应力混凝土连续梁支座附近出现浇筑不密实、蜂窝麻面等问题,一定程度上影响了连续梁质量。针对这一现状,结合BIM及C#语言技术,从深化设计平台的选择、精细化模型的构建以及BIM技术在深化设计中的应用开展研究。结果表明:(1)通过合理拆分并在空间上进行布尔组合,能够较快构建铁路连续梁零号节段BIM模型,满足深化设计条件;(2)基于BIM模型开展深化设计、生成2D图纸并统计工程数量,能够直观发现设计中的不足,一定程度上提升设计质量和效率。     

基于信令数据的出行强度影响因素分析模型

为探究城市交通出行强度影响因素及不同因素的影响程度，本文从土地利用与交通基础设施建设两方面出发，分析包括土地利用混合指数，职住混合率熵指数，公共交通站点 500 m覆盖率，路网可达性等17个指标与出行强度的相关关系；基于相关系数和拟合优度分析，提取7个与出行强度强相关指标，基于所识别指标构建北京市中心城区出行强度多元回归模型.模型结果表明，职住混合率熵指数对出行强度的影响最为显著，公共交通站点覆盖率对出行强度的影响比道路网密度和可达性更为明显.此外，给出单一土地利用/交通基础设施指标对出行强度拟合结果的离群特征分析方法，用于评估不同区域基础设施供给与交通出行需求之间的平衡关系.     

Traffic modelling in system boundary expansion of road pavement life cycle assessment

This paper uses a case study of a UK inter-urban road, to explore the impact of extending the system boundary of road pavement life cycle assessment (LCA) to include increased traffic emissions due to delays during maintenance. Some previous studies have attempted this but have been limited to hypothetical scenarios or simplified traffic modelling, with no validation or sensitivity analysis. In this study, micro-simulation modelling of traffic was used to estimate emissions caused by delays at road works, for several traffic management options. The emissions were compared to those created by the maintenance operation, estimated using an LCA model. In this case study, the extra traffic emissions caused by delays at road works are relatively small, compared to those from the maintenance process, except for hydrocarbon emissions. However, they are generally close to, or above, the materiality threshold recommended in PAS2050 for estimating carbon footprints, and reach 5–10% when traffic flow levels are increased (hypothetically) or when traffic management is imposed outside times of lowest traffic flow. It is recommended, therefore, that emissions due to traffic disruption at road works should be included within the system boundary of road pavement LCA and carbon footprint studies and should be considered in developing guidelines for environmental product declarations of road pavement maintenance products and services.     

基于有限元的尼龙板热膨胀性能分析

尼龙材料由于其良好的机械性能及热性能而被广泛应用于各种生产领域,了解掌握尼龙板材在不同温度环境下的热膨胀变形对于设备的维护和保养十分重要。本文从材料的热膨胀理论出发,以有限元的理论为基础,详细讨论尼龙板材在不同温度下发生的热膨胀变形,通过有限元仿真分析尼龙板材在不同温度下的热膨胀性能,得出尼龙板在一定温度范围内的热膨胀变化规律。     

The effects of planned and unplanned transfers on public transport users' perception of transfer routes

Many authorities are investing in new infrastructure to improve the quality of public transport (PT) services in the hope to increase mode switch from cars. The goal is to provide users with an integrated multimodal PT network by facilitating transfers. There exists a lack in the clarity of the attributes which defines a planned transfer and the effects of planned transfers on users' willingness to use routes with transfers. The present study provides approximate effects of ‘planned’ and ‘unplanned’ transfers on PT users' decisions to use transfer routes. The study focuses on two attributes of ‘planned’ transfers, integrated physical connection of transfers and information integration. A user preference survey was undertaken in Auckland, New Zealand. Analysis of the results shows that physical integration is more important than information integration for current PT users. Results also suggest that information integration has a greater influence on users of transfer services which are more closely aligned to being ‘unplanned’.     

钢檩条设计中的若干问题

轻型屋面钢檩条的竖向荷载、整体稳定性计算以及檩条与屋面梁、屋架的连接构造是设计的重要环节,本文结合规范和国家标准设计图的编制提出若干问题,供参考.     

圆形隧道施工对不同深度地层沉降影响的模型试验研究

为了预测圆形隧道施工引起地表以下不同埋深地层沉降特征,首先,通过理论推导不同地层最大沉降位移与沉降槽宽度系数的函数关系;然后,建立包括试验台架、地层模型、圆形隧道开挖模型以及测量地层变形装置的平面应变模型试验系统。通过理论解析和模型试验可知:1)地表以下地层的最大沉降位移与沉降槽宽度系数成反比;2)不同深度地层的沉降位移随着地层埋深的增加而增大,且地表以下地层沉降槽曲线仍然符合正态分布;3)通过对模型试验数据进行回归分析,得到黏土地表以下不同深度地层沉降槽宽度系数的计算公式,从而为预测圆形隧道施工地表以下不同深度地层竖向位移提供了一种可靠的计算方法。     

Power network parameter estimation method based on data mining technology

The parameter values which actually change with the circumstances, weather and load level etc.produce great effect to the result of state estimation. A new parameter estimation method based on data mining technology was proposed. The clustering method was used to classify the historical data in supervisory control and data acquisition (SCADA) database as several types. The data processing technology was impliedto treat the isolated point, missing data and yawp data in samples for classified groups. The measurement data which belong to each classification were introduced to the linear regression equation in order to gain the regression coefficient and actual parameters by the least square method. A practical system demonstrates the high correctness, reliability and strong practicability of the proposed method.