弹性支承块轨道结构落轴冲击动力性能分析

将轮轨接触边界条件用罚函数法释放,采用点面接触单元导出轮轨接触有限元控制方程,建立轨道结构落轴冲击动力有限元方程。分析落轴冲击对轨道结构产生的动态响应,比较弹性支承块及短轨枕埋入式整体道床轨道结构的动力性能,并用现场实测数据进行验证。结果表明:弹性支承块轨道结构与普通短轨枕结构相比,其轨下及块下刚度易于调整,可进行双层弹性的合理匹配,从而有效吸收轮轨冲击,提高列车运行平稳性,具有减振降噪与延缓轮轨磨损等优越性能。建议其块下刚度稍大于轨下刚度,增幅值控制在20%以内。     

并列弹性双圆柱体流体脉动力的实验研究

本文通过试验研究了并列弹性双圆柱体在均匀流场中的脉动压力及其动态响应，给出了双柱间距直径比T／D＝1．75，2．5，3．5和4．19×104＜Re＜9．1×104范围中柱表面脉动压力沿圆柱周向的分布以及脉动升力和阻力系数．试验结果表明，柱的振动对其脉动升力和阻力系数有明显的影响．     

SAWI在水泥混凝土路面薄层罩面中的应用

文章结合广清高速公路水泥混凝土薄层罩面结构设计实例,介绍了应用高弹改性沥青应力吸收层（SAWI）的水泥混凝土加铺薄沥青层的路面结构设计过程,阐述了SAWI的性能特点与施工质量控制的方法和重点,并对其实际使用性能进行了跟踪检测。结果表明：应用SAWI的水泥混凝土薄沥青层加铺技术可较好地抵抗反射裂缝,并能减少路面厚度,降低工程造价,是一项具备良好发展前景的水泥路面加铺新技术。     

高水压盾构隧道管片接缝防水可靠性试验研究

盾构隧道管片衬砌防水至关重要,而在东亚地区大部分盾构隧道都采用单层衬砌,由于没有内衬,则弹性密封垫的可靠性变得更为关键.作者以南京市纬三路过江隧道工程为依托,研制了全新的高水压、全自动三向加载防水性能试验系统,并运用工程实际1∶1的弹性密封垫和混凝土试件,进行了多组密封垫装配力及一字缝、T字缝防水性能试验,从而研究优化出了性能、结构优异的三元乙丙橡胶弹性密封垫断面形式.试验结果表明,密封垫装配力与其防水性能存在很大程度上的相关性;密封垫的硬度、沟槽填充率在不同程度上对密封垫防水性能有直接影响.     

Exact and simplified estimations for elastic buckling pressures of structural pipe-in-pipe cross sections under external hydrostatic pressure

Structural pipe-in-pipe cross sections have significant potential for application in offshore oil and gas production systems because they combine thermal insulation performance with structural strength and self weight in an integrated way. Such cross sections comprise inner and outer thin-walled pipes with the annulus between them fully filled by a selectable filler material to impart an appropriate combination of properties. Structural pipe-in-pipe cross sections can exhibit several different collapse mechanisms, and the basis of the preferential occurrence of one over the others is of interest. This article presents an exact analysis for predicting the elastic buckling behaviours of a structural pipe-in-pipe cross section when subjected to external hydrostatic pressure. Simplified approximations are also investigated for elastic buckling pressure and mode when the outer pipe and its contact with the filler material is considered as a pipe on an elastic foundation. Results are presented to show the variation of elastic buckling pressure with the relative elastic modulus of the filler and pipe materials, the filler thickness, and the thicknesses of the inner and outer pipes. Case studies based on realistic application scenarios are used to show that the simplified approximations are sufficiently accurate for practical structural design purposes.     

深水SPAR平台截断技术研究

To solve the dimensional limitations of physical models in tests, an equivalent water depth truncated design for a classical SPAR working in 913 m water was investigated. The water depth was reduced to 736m and then to 552m. As this was done, the mooring line lengths, EA value, and mass per meter were adjusted. Truncation rules and formulas for parameters and truncation factors were proposed. SPAR static characteristics were made to be consistent with those at full water depth. Then further time-domain coupled analysis was carried out for the SPAR when the mooring system experienced waves. The mooring lines were simulated by quasi-static method. Global responses and mooring line forces were found to agree well with test results for a prototype at that water depth. The truncation method proved to be robust and reliable.     

复杂电力系统的鲁棒降阶方法研究

针对当前复杂电力系统的数学模型的多变量、高阶次、强耦合,把H∞控制中的模型匹配问题与高阶系统平衡截断降阶方法相结合,提出了鲁棒降阶控制方法．应用这种方法对两区域间互联电力系统进行降阶,并与改进平衡法的降阶系统进行仿真比较,然后对鲁棒降阶系统进行解耦．通过仿真结果可以看出鲁棒降阶方法具有更好的降阶效果,降阶系统可以达到所希望的性能要求．     

Elastic Modulus Limit of Support Layer in Twin-Block Ballastless Track Based on Train Load Effect

The support layer is an important component of twin-block ballastless track. The modulus of the support layer is an important design parameter and must be carefully solved. We studied the bending stress and deformation of track slab and support layer due to train load using the beam-plate finite element model on elastic foundation. The results show that support layer type has great impact on both support layer deformation and the stress on subgrade, but has little impact on the bending stress of either track slab or support layer. The continuous support layer type, and articulated support layer type with shear transfer device at their ends, are recommended. In order to keep the stress in the support layer less than that in track slab, the modulus of the continuous, unit, and articulated types of support layer (in unit twin-block ballastless track), and the support layer in continuous twin-block ballastless track, should not be larger than 15, 22, 20.5 and 5 GPa, respectively. In addition, the modulus of the unit-type support layer should not be more than 20 GPa, to ensure the step in support layer remains less than 1 mm.     

直接数字频率合成的杂散信号分析

介绍了直接数字频率合成技术以及分析其杂散误差,对相位截断误差和幅度量化误差进行了傅立叶级数分析研究。文章最后还简单介绍了几种改善杂散误差的方法。