超高水头船闸输水系统消能试验研究

利用ADV流速测量仪,通过对超高水头船闸闸室内流速及流速分布的测定,详细比较了明沟消能与盖板消能的消能特性、消能效果和消能方式,可为高水头船闸输水系统消能工设计提供科学依据。     

基于汽车碰撞智能吸能装置的电子控制系统的研究

汽车碰撞智能吸能装置,采用以单片机为核心的控制系统,通过接收传感器获取的轮速信号,计算出碰撞能量的大小,进而控制吸能机构的吸能能力。     

Solving resource-constrained multiple project scheduling problem using timed colored Petri nets

To solve the resource-constrained multiple project scheduling problem (RCMPSP) more effectively, a method based on timed colored Petri net (TCPN) was proposed. In this methodology, firstly a novel mapping mechanism between traditional network diagram such as CPM (critical path method)/PERT (program evaluation and review technique) and TCPN was presented. Then a primary TCPN (PTCPN) for solving RCMPSP was modeled based on the proposed mapping mechanism. Meanwhile, the object PTCPN was used to simulate the multiple projects scheduling and to find the approximately optimal value of RCMPSP. Finally, the performance of the proposed approach for solving RCMPSP was validated by executing a mould manufacturing example.     

Robust optimization for the correlated MIMO downlink with imperfect channel state information

To reduce the performance deterioration induced by imperfect channel state information (CSI) in cor-related multiple input multiple output(MIMO) downlink, the linear transmit/receive filters should be optimized to be robust to imperfect CSI. A sub-optimization algorithm based on minimizing sum MSE conditional on available imperfect CSI estimates subject to a per-user power constraint is proposed. The algorithm adapts the existing MMSE algorithm from uncorrelated single-user MIMO system with perfect CSI to correlated MIMO downlink with imperfect CSI. Simulation shows that the suboptimal algorithm can effectively mitigate the performance loss induced by imperfect CSI and has a good convergence performance. In addition, the effect of spatial correlation on the performance of the proposed algorithm is also simulated.     

第十一届中国国际机床展（北京）德马吉新闻发布会

2009年4月6日至11日,第十一届中国国际机床展将在北京举行。在1000多平方米的E2馆A100展位上,德马吉将为您展出21台最佳性能的机床,其中包括世界领先的数控万能铣床：DMU 50 eco。您将有机会首次看到最先进和独特的生产解决方案,体验超乎寻常的创新理念。     

铁道车辆用铝合金吸能结构的准静态压缩试验及其数值分析

介绍了日本铁道车辆用铝合金吸能结构的准静态压缩试验和数值分析结果,为研发类似产品提供了指导方向。     

沥青混合料愈合特性评价方法研究

该文基于单位时间恢复的耗散蠕变应变能,建立了沥青混合料愈合率确定方法,并研究了4种不同沥青混合料的愈合特性.试验包括重复荷载试验和周期回弹模量试验.为了消除混合料损伤大小对愈合参数的影响,定义标准愈合率为DCSE/DCSE<,applied>.结果表明:当温度超过10℃时,沥青混合料的愈合率会显著增大,且集料结构特性(如集料骨架、沥青膜厚度和VMA)比聚合物改性剂的影响更大.     

Kondo 绝缘体的能隙形成机制

采用格林函数退耦合方法研究了非对称周期性Ａｎｄｅｒｓｏｎ模型．结果表明，在相干区随杂化作用的增强体系有能隙产生，且能隙具有较强的温度依赖．体系的磁化率随温度非单调变化．上述结果与Ｋｏｎｄｏ绝缘体的行为一致．     

主曲线方法在交通安全数据分析中的应用

针对交通安全数据的非参数性,将主曲线方法应用于交通安全数据分析.通过未知分布数据集的HS主曲线算法对交通安全数据进行分析后,得到一条通过数据集合中间的曲线,来描述该数据集合的特征,以此作为执行管理标准的依据.研究表明,交通安全数据集的主曲线能够较好的描述出数据本身所具有的非线性关系,可以作为执行管理标准的依据.