轿车三维分离流动特性的研究

本文介绍了使用激光片光技术及激光多普勒测速仪对某型国产轿车尾流的三维分离流的尾迹和速度分布测定的试验研究。本项研究表明，光学流态显示和数字图象技术相结合，可以有效地揭示汽车的尾流结构，诊断阻力来源，本项研究为建立汽车三维分离流动的动态仿真理论模型提供了依据。     

多年冻土地区路基冻胀变形分析

首先模拟气候因素变化过程,得到不同时期冻土路基温度场分布,温度场随时间的变化可以反映出冻结相变区的变化,然后考虑土体体积力和土体冻结相变产生的冻胀力,采用考虑拉破坏的热弹性力学方法,分析得到多年冻土地区路基变形分布和演变规律;在此基础上,对冻土路基纵向裂缝的成因进行研究,揭示出冻土路基纵向裂缝主要出现于路面中部及路面靠近路肩部位,这与实际情况是相符合的。进一步的分析表明:采用低冻胀性的土填筑路基,如采用碎石土填筑,对于降低冻土路基冻胀变形及防治纵向裂缝病害是有效的。     

治理公路超载超限运输的长效机制和对策研究

为建立治理超载超限运输的长效机制,首先建立了运输企业收入的计量模型,分析了企业利润与运输价格、运输成本、超载罚款等变量之间的互动关系及企业获得最大利润的条件。在此基础上,针对中国道路货运市场结构的特点,从理性经济人的角度,对运输企业在“惩罚博弈”下可能的行为选择进行了研究;其次结合美国治理超载超限运输的经验,分析了不同执法强度和执法密度组合的执法策略及其适用条件、执法效果等,对中国治理超载超限运输提出了解决方案和具体的政策建议,对中国治理超载超限运输具有指导意义。     

内燃机活塞-缸套-活塞环系统工作状态的识别方法

提出了一种基于证据理论方法的内燃机活塞—缸套—活塞环系统工作状态的识别方法。通过搭建试验台架,从实车试验中获取曲轴箱压力信号和机身振动加速度信号;提取试验特征值,组建模型样本和试验样本,并运用证据理论信息融合方法对内燃机的工作状态进行识别。研究结果表明:应用证据理论信息融合方法融合曲轴箱压力信号和机身振动加速度信号,进而识别活塞—缸套—活塞环系统的工作状态这一方法有效、可行。     

一种新的沥青混合料疲劳性能评价方法

根据Lemaitre应变等效假设,定义沥青混合料疲劳损伤参量,并在分析沥青混合料疲劳损伤过程的基础上,定义新的疲劳破坏标准。然后通过三分点小梁弯曲疲劳试验建立基于损伤理论的沥青混合料疲劳性能评价方法。重合性检验表明,该损伤疲劳模型与荷载控制模式无关,从而可以更合理的评价混合料疲劳性能。     

基于专家系统和证据理论的路面破损原因评价方法研究

路面破损原因评价是一项经验性很强的工作,通过采用专家系统技术,利用路面养护专家经验和知识形成产生式规则,并对单处路面破损原因进行评价。根据对单处路面破损原因的评价结果中也包含了导致整个路段路面破损主要原因的信息这一特点,介绍了引入证据理论将这方面信息提取出来,合成得出对整个路段的主要破损原因评价的方法。     

路堤荷载下管桩复合地基设计理论的试验研究

介绍了管桩复合地基在某高速公路软基试验工程中的应用,并简单分析了其加固效果,进而结合已有的研究成果,提出了一套路堤下刚性桩复合地基的设计理论。通过工程实践表明,该设计理论具有在工程实践中推广运用的价值。     

A regression and beam theory based approach for fatigue assessment of containership structures including bending and torsion contributions

Container shipping has been expanding dramatically during the last decade. Due to their special structural characteristics, such as the wide breadth and large hatch openings, horizontal bending and torsion play an important role to the fatigue safety of containerships. In this study the fatigue contributions from vertical bending, horizontal bending and torsion are investigated using full-scale measurements of strain records on two containerships. Further, these contributions are compared to results from direct calculations where a nonlinear 3D panel method is used to compute wave loads in time domain. It is concluded that both bending and torsion have significant impacts on the fatigue assessment of containerships. The stresses caused by these loads could be correctly computed by full-ship finite element analysis. However, this requires large computational effort, since for fatigue assessment purposes the FE analysis needs to be carried out for all encountered sea states and operational conditions with sufficient time steps for each condition. In this paper, a new procedure is proposed to run the structure finite element analysis under only one sea condition for only a few time steps. Then, these results are used to obtain a relationship between wave loads and structural stresses through a linear regression analysis. This relation can be further used to compute stresses for arbitrary sea states and operational conditions using the computed wave loads (bending and torsion moments) as input. Based on this proposed method for structure stress analysis, an efficient procedure is formulated and found to be in very good agreement with the full-ship finite element analysis. In addition it is several orders of magnitude more time efficient for fatigue assessment of containership structures.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

地下工程注浆技术研究新进展

注浆是土木、水利和矿山等工程建设中重要的防渗和加固技术。文章基于国内外注浆技术研究文献,总结了水泥等颗粒性浆液的“渗滤效应”及“黏度时空变异性”等理论研究成果,论述了非水反应高聚物、CW环氧树脂和微生物菌液等注浆新材料的应用现状及发展前景,介绍了细观力学数值模拟研究的突破性进展,可为地下工程注浆技术发展提供借鉴和启发作用。