Conformity: How VMT-speed distributions can affect mobile emission inventories

Transportation conformity is a US regulatory process that requires that transportation modeling be integrated with air quality modeling. Consequently, every change to either modeling process is undertaken with great scrutiny by the regional governments, who have to use the models for demonstrating conformity. This paper explores the "trip versus link debate," which stems from the fact that the standard travel demand models used by most metropolitan planning organizations are primarily link oriented, while the air quality models have been primarily trip oriented. Using the Sacramento region we examine the effects on mobile source emissions inventories when speed-VMT distributions are constructed using the trip and link-based philosophies. The results of our study indicate that trip-based VMT-speed distributions produce consistently lower emissions estimates than the link-based distributions. We use the results to assert that deciding between a trip-based or link-based conformity modeling process involves more than the technical difficulty of changesto the models or the potential political ramifications, it involves assessing which method will provide the most accurate estimates of regional motor vehicle emissions. We also examine ways to think about constructing mobile source emission inventories.     

砂卵石地层台阶法施工隧道围岩-支护结构应力应变特性三维离散元分析

为了解砂卵石地层隧道围岩和支护结构的应力应变特性，以青海循隆高速公伯峡隧道为依托，借助PFC3D离散元软件对公伯峡隧道穿越砂卵石地层进行三维模拟，重点研究以密排短管棚预支护为根本前提，以三台阶预留核心土为施工方法的砂卵石地层围岩和支护结构的应力应变特性，并与现场实测进行对比分析。研究结果表明： 隧道台阶开挖时，围岩应力集中范围逐渐从拱顶过渡到拱腰，直到拱脚，对应的塑性区范围不断扩大，且密排短管棚对塑性区的发展有一定的“遮拦效应”； 围岩横纵向变形规律一致，主要是向隧道临空面产生收敛变形，且密排短管棚形成的梁拱效应限制了掌子面前方位移发展； 2种方法得到的初期支护变形规律一致，均呈阶段性变化，拱顶下沉累计值大于周边收敛累计值，且两者的最终变形量均满足规范限值要求。     

船体三维网格的自动生成算法及其图形用户界面的设计

本文介绍的三维湿表面网格的自动生成算法,不但可完成型值表各站型线的等弧长插值拟合,而且能够在沿船长方向的任意位置上进行站的加密和插值,从而自动生成三维湿表面网格。该算法的实现依赖于一套完整的图、形用户界面。此界面用Ｕｎｉｘ平台的Ｍｏｔｉｆ、Ｃ和ＧＬ编制,友好灵活,方便易用。     

64D型半自动闭塞电子化浅析

简要介绍了铁路闭塞技术以及64D型半自动闭塞的继电器电路实现，在此基础上引入了64D型半自动闭塞的电子化实现方式，最后对二者的使用成本作了比较并得出结论。     

Decoupled 3D moment control using in-wheel motors

Vehicles equipped with in-wheel motors are being studied and developed as a type of electric vehicle. Since these motors are attached to the suspension, a large vertical suspension reaction force is generated during driving. Based on this mechanism, this paper describes the development of a method for independently controlling roll and pitch as well as yaw using driving force distribution control at each wheel. It also details the theoretical calculation of a method for decoupling the dynamic motions. Finally, it describes the application of these 3D dynamic motion control methods to a test vehicle and the confirmation of the performance improvement.     

土-结构相互作用的桥梁多尺度建模与分析

考虑土-结构相互作用(SSI)是地震激励下桥梁抗震性能评估的热难点之一.由于考虑土体影响多而建立的结构模型计算耗时极长,为了提高效率,现采用一致多尺度建模方法,将所研究部位建为实体单元,其他部位建为梁单元,单元之间采用适当的方法进行界面连接,保证宏观、精细单元间的变形协调,并对某一桥梁进行分析,验证了该方法的正确性.在此基础上,基于多尺度建模方法,建立三跨连续梁桥模型,对其进行弹塑性时程分析,对比分析考虑SSI和不考虑SSI效应的桥梁模型在地震激励下的响应结果,研究SSI效应对桥梁抗震性能的影响.结果表明:多尺度建模方法可以在保证计算精度的前提下有效地提高计算效率;考虑SSI效应能够有效地降低桥梁的抗震性能需求.因此,在设计时应加以考虑.     

温州状元岙化工码头工程潮流泥沙数模研究

采用水动力泥沙条件、底床冲淤演变分析及二维潮流泥沙数值模拟手段,对拟建的温州港状元岙港区化工码头工程方案进行了研究。研究结果表明:(1)工程海区潮汐属于正规半日潮类型,为强潮海区;(2)工程海区潮流性质属于不规则半日浅海潮流,潮流运动呈往复流形式;(3)工程海域深槽多年来在波浪潮流作用下一直处于稳定状态;(4)规划的化工码头走向与涨落潮流走向基本一致;(5)规划的化工码头实施后工程附近海区的涨落潮流速呈增加趋势,码头前沿会略有冲刷;(6)化工码头建设对锚地流场没有影响;(7)化工码头工程方案是合理可行的。     

新型景观护岸结构设计

介绍一种护岸结构造型及其特点,并为水工结构设计注入景观意识提供思路。     

基于鲁棒性的空调自控系统设计

分析了空调自控系统的主要特性,并介绍了一种基于组合自校正控制策略的自适应控制算法,同时采取一些解决工程实际问题的辅助措施,以增强系统的抗干扰能力和对未建模动态、时变参数的鲁棒性.     

高尔夫A3型轿车行李箱盖有限元计算与方案优化设计

在对德国大众汽车公司生产的高尔夫A3型轿车行李箱盖的使用材料性能进行实验研究的基础上，建立了三维数学模型，利用I－deas工程软件对其有限元计算，并通过实地结果进行验证，最后提出了高尔A3车行李箱盖的优化方案。