整车电气系统的布置集成

电气系统的合理布置是整车电子、电气系统构架成功实施的前提，本文对整车电器布置工作从模块及其安装、造型电子布置和线束布置3个方面进行阐述。     

基于MATLAB/SIMULINK的异步牵引电机反馈试验方案仿真

文章介绍了一种新的异步牵引电机反馈试验方案,并用MATLAB/SIMULINK对该方案进行一定的建模与仿真,并给出仿真的方法和结果。     

舰艇仿真指控系统的设计与实现

舰艇指控系统是海军新型舰艇的作战指挥控制中心，实现仿真指控系统是舰艇新装备尽快形成战斗力的需要。在“新型导弹驱护舰作战指控舱仿真训练系统”项目建设的基础上，提出了舰艇仿真指控系统的设计方案和有关技术难点的实现方法。     

A vehicle type-based approach to model car following behaviors in simulation programs (case study: Car-motorcycle following behavior)

Traffic simulation models often neglect the important role of motorcycles and assume a flow of various combinations of cars. This paper addresses how much different would be the behavior of a car driver while following a motorcyclist compared to cases in which a car follows another car, along with a segment of an urban highway in the non-congested flow. Recognition of such a difference might help to develop existing simulation models and to improve the behavior of car drivers in such a way to lead to lower accidents with motorcycles. To reach the goal, a GHR (Gazis-Herman-Rothery) model for car following is applied and data have been collected by video cameras during 15?min time intervals in three different days. Analysis of 198 car-motorcycle and 374 car-car following observations has indicated that when a car driver follows a motorcycle, keeps a higher headway (about 10?m in the low speed) with a lower acceleration/deceleration in comparison with the situation in which car driver follow another one. It means that the behavior of the follower car driver would be more cautious compared to situations in which a car driver follows another one, especially in space headways <10?m. In addition to main findings of the paper for developing a more realistic simulation program, the paper also addresses that in cases when the required safe space between a car and a motorcycle would be endangered, a warning message could be generated for the car driver (by implementing an in-veh ITS technology) to warn driver about keeping a safe distance.     

南京长江第三大桥钢塔工程控制技术

南京长江第三大桥索塔为“人”字形曲线钢塔。通过试验验证钢筋混凝土棒剪力键群传递荷载的传力机理及承载能力,并编制了制造及架设工艺技术标准。钢塔制造采用板单元件、块体、箱体三阶段制作工艺;采用组装胎型和施焊方法,控制曲线钢塔线型;开发集激光跟踪测量、计算机控制及液压技术于一体的精密加工找正技术,进行钢塔端面加工;采用计算机预拼代替多节段实际预拼,开发精度管理系统进行累计精度控制。钢塔架设采用自立式定臂塔机吊装,施工过程中对关键部位布设应变计进行实时监测,严格工序检查和现场检测,3个月完成高232 m、最大重160 t的钢塔吊装;形成并采用TMD、TLD相结合的钢塔吊装被动制振方案。2005年9月交工验收检测:安装端面接触率≥65%,最大偏位≤1/6 000。     

C~3Ⅰ系统抗攻击能力评估研究

介绍一种评估C3Ⅰ系统抗攻击能力的方法。首先提出用网络熵的方法进行定量分析,然后用模糊综合评判的方法进行评估,最后结合实例对该方法进行验证,得出评估结论。     

Simulation Modeling and Analysis of Operator-Machine Ratio

Introduction In recent years, labor cost in China is continu-ously and significantly increasing across industries.More and more companies, particularly semiconduc-tor companies, are taking strategies to cut labor costwithout impairing normal production. Operator-ma-chine ratio (OMR) denotes the maximum number oftools a laborer can operate. It is a measure of opera-tion efficiency of an operator and one of key factors toensure the competitiveness.The traditional static Excel model[1]involvin…     

三维设计在船体结构中的应用

在三维空间里设计水面舰艇的船体结构是军船结构设计的发展趋势。介绍船体结构三维设计的构思;三维设计方法与传统二维设计方法的比较;目前三维设计可达到的设计深度。详细论述结构三维设计的研究内容和具体实施方法,揭示三维设计中的关键技术,最后提出舰艇船体结构三维设计的发展构想。     

对基坑开挖和土钉支护条件下的基坑稳定性的FLAC3D数值模拟分析

运用FLAC~(3D)软件对郑州某基坑工程进行了开挖与支护模拟计算,对基坑稳定性进行了分析,对土钉支护工作机理进行初步研究,得到基坑边坡变形和受力以及土钉受力的规律。最后结果表明应用FLAC~(3D)程序对基坑土钉支护的数值模拟是可行的,通过计算得出不同开挖阶段的基坑边坡位移、基底隆起以及对土钉拉力为工程设计与施工提供参考。     

基于Petri网的虚拟维修手部动素建模

针对虚拟维修仿真中手部动作仿真难度大、不容易控制的问题,提出基于Petri网手部维修动素模型,将虚拟维修手部动作根据维修操作封装为若干动素单元的组合,降低了仿真计算的难度,从而提高手部动作控制的精确性,以螺栓拆卸的手部动作建模过程为例进行验证。