泥水平衡式顶管法在双孔3m顶管中的应用

在太原市的城市建设当中,首次采用双孔3 m顶管,在全国大管径的顶管中双孔布置,也较少采用,本工程采用泥水平衡式顶管法对双孔3 m顶管,成功顶进529.6 m,为今后在太原市地区的地质情况下进行大管径顶管积累了宝贵经验。     

Numerical evaluation of land subsidence induced by dewatering in deep foundation pit

To predict the behavior of land subsidence due to groundwater withdrawal, a 3D numerical model is established. The model takes the confined aquifer and soft deposit of Ningbo into account. According to the pumping test data, changing regulations of groundwater level, and land subsidence during dewatering are analyzed. Comparison between the calculated value and measured value shows that the 3D model simulates the measured value fairly well. The future behavior of land subsidence during dewatering period provides the scientific basis for the construction of deep foundation.     

基于3-RPS空间并联机构的发动机支撑台架设计

基于3-RPS空间并联机构原理,分析了该并联机构应用于发动机支撑台架设计中存在的问题,并对3-RPS机构进行改良优化,设计了某发动机支撑台架.实际应用表明,所设计的发动机支撑台架能很好地满足发动机的工作要求.     

高地应力区断层带隧道施工力学研究

应用有限差分软件FLAC3D对高地应力区断层带隧道工程中施工力学性态和变形空间效应进行数值模拟,分析了隧道施工过程中作业面的空间效应,重点研究了隧道拱顶、拱脚及边墙围岩的位移、应力随施工步的变化规律,为隧道优化设计和施工提供了参考依据。     

深埋高应力围岩变形破坏三维物理模拟试验

随着我国浅部资源的逐渐减少和枯竭,矿物资源地下开采的深度越来越大,深埋高应力巷道的围岩变形、破坏规律的研究显得更加重要。采用WYQ1000—Ⅰ型地下工程综合模拟试验系统,通过三维物理试验模拟巷道的真实开挖、变形和破坏过程,研究有、无支护体系形态下的围岩变形,针对围岩应力以及位移变形破坏特征进行深入分析,得出深埋高应力巷道围岩变形破坏及支护作用机理。     

变阻抗桩纵向振动的半解析解

考虑桩周土体的三维波动效应,分析成层黏性材料阻尼土中桩顶受任意轴向激振力作用时变阻抗桩的纵向振动特性,求得桩顶频域响应解析解、复刚度和速度导纳,分析了底部土层模量变化和桩身阻抗变化对桩纵向振动特性的影响。     

Fe32Mn3Al8Cr反铁磁精密电阻合金Al_2O_3防护涂层的研究

用溶胶-凝胶法在Fe32Mn3A18Cr反铁磁精密电阻合金表面提拉制备Al2O3耐腐蚀防护涂层。采用X射线衍射分析涂层相结构,扫描电镜观察涂层表面形貌。在Fe32Mn3A18Cr合金表面形成连续、光滑的Al2O3涂层,具有（110）择优取向的γ-Al2O3结构。采用动电位阳极极化法测定涂层的电化学腐蚀性能表明,与原始合金相比较,在1mol／LNa2SO4溶液中,Al2O3涂层的自腐蚀电位提高了571 mV,自腐蚀电流密度降低了1个数量级以上,维钝电流密度降低了近1个数量级;在1％NaCl溶液中,自腐蚀电位与原始合金相当,自腐蚀电流密度降低了2个数量级,腐蚀电位高达2000mV（SCE）时仍未发生孔蚀击穿。而且,Al2O3防护涂层的耐均匀腐蚀和耐孔蚀性能均优于1Cr18Ni9Ti奥氏体钢。     

全固态皮秒THz波参量振荡器的优化设计

针对全固态皮秒THz波参量振荡器,设计了一种蝴蝶型腔结构.并采取优化设计MgO：LiNbO3（MgO：LN）晶体掺杂浓度、耦合输出方式和最佳晶体长度及提高THz波的转化效率等措施,实现全固态皮秒THz波参量振荡器的高性能运转.计算结果为全固态皮秒THz波参量振荡器基于MgO：LN晶体差频产生可调谐THz波辐射的实验研究提供进一步深入的理论基础.     

真3维公路设计错误检测算法的研究与实现

由于真3维公路设计与传统2维公路设计的差异,如何在真3维的环境中进行设计错误的检测,至关重要。文章针对该问题,利用数学理论进行了2种检测方法的研究,从编程和精度角度分析其优缺点,利用线段长度比较的方法对平面线设计错误进行检测,达到了很好的应用效果,并能够在进行线位调整的同时,自动给出错误的检测结果,为真3维公路设计提供了参考。     

Improvement the electrochemical performance of Li1.2Ni0.2Mn0.6O2 electrode with AlF3 added

Layered solid solution material Li_1.2Ni_0.2Mn_0.6O₂ is synthesized and the AlF₃ is added to improve the electrochemical performance. X-ray diffraction (XRD) results show that the Li_1.2Ni_0.2Mn_0.6O₂ samples exhibit layered characteristics. The AlF₃ additive is detected by transmission electron microscope (TEM) technology. The electrochemical tests show that Li_1.2Ni_0.2Mn_0.6O₂ electrode with AlF₃ added delivers better discharge capacity (240mA· h/g), first coulomb efficiency 79.2%, cyclic performance (capacity retention ratio of 100.6% after 50 cycles), and rate capacity (68mA · h/g at 10 capacity (C)) than the pristine sample. Electrochemical impedance spectroscopy (EIS) results show that the charge transfer resistance of Li_1.2Ni_0.2Mn_0.6O₂ electrode with AlF₃ added increases slower than that of pristine Li_1.2Ni_0.2Mn_0.6O₂ after cycling, which is responsible for better cyclic and rate performance.