高速排水艇回转性能估算

建立并求解高速排水艇稳定回转的运动方程。对运动方程中裸船体和附体的水动力导数、舵作用力和力矩、多个螺旋桨对回转的影响等进行估算。并以120t级渔政船为例，进行稳定回转直径和横倾角的计算，并与实船的试航结果进行比较。     

F8型集成化电空制动单元研制与试验

介绍了F8型集成化电空制动单元的结构与作用性能，重点论述了其设计和试验情况。     

8G型机车加设自动常用制动功能的可行性分析

分析了DK-1型机车电空制动机的自动常用制动功能的特点,根据8G型机车上8G-1型空气制动机的工作原理和LKJ-93监控装置的常用制动功能,对8G型机车加设自动常用制动功能的可行性进行理论分析,并提出了改造方案。     

基于模糊神经网络的海浪中舰船多自由度运动建模方法研究

基于切片理论计算在诸规则波中的舰船多自由度运动响应，并以此为样本训练模糊神经网络，最终建立起一种新的舰船在随机波浪中的多自由度运动模型，并通过算例验证该方法的实用性和可靠性。     

DF8B机车轮对踏面剥离的原因分析及对策

介绍了合肥机务段DF8B机车轮对剥离的情况,从机车的运用条件及轮对本身质量等方面分析了原因并提出改进建议.     

2750 TEU集装箱船的局部振动评估

通过半解析法和有限元法对一艘2750TEU集装箱船进行了机舱、尾部及甲板室的局部振动预报,包括板格、筋和板架的首阶固有频率以及罗经甲板和舷侧板架的固有频率和振动模态。计算表明,2750TEU集装箱船的局部振动性能良好,满足亚临界动态设计的设计衡准。指出对采用低速机的船舶而言,用亚临界动态设计方法是可行的。     

滑模变结构控制技术在舰船自动舵中的应用研究

本文介绍了船舶自动操舵仪的发展历程和滑变结构控制技术的特点,论述了舰船航向变结构控制的意义,对未来自动操舵仪的发展趋势进行了展望。     

汕头市苏埃通道工程海域段平纵横方案研究

为有效解决汕头市苏埃通道工程遇到的海底硬岩、孤石群及高烈度抗震等技术难题,从海底隧道横断面、平面及纵断面方案进行研究。主要研究和结论如下： 1）对两管方案与三管方案进行比较,在海底硬岩处理方面,2种方案施工风险无本质区别,但两管方案可利用车道板下空间解决消防防灾问题、取消隧道联络通道设置、降低施工及抗震风险,优于三管方案; 2）从抗震、工程造价、结构受力及隧道运维等方面进行研究,发现盾构管片采用单层预制结构优于管片内置二次衬砌结构; 3）隧道平面方案需摸清海底硬岩及孤石群分布范围,结合码头、港池及锚地等控制因素综合确定; 4）隧道纵断面方案的确定,需充分考虑海底硬岩、孤石分布规律以及最小覆土、主航道规划标高、港池范围等控制因素,避开硬岩及孤石群,以减小隧道修建难度和风险。     

大型集装箱船船体结构设计制造探讨

介绍了大型集装箱船的发展历程和当前的市场状况,分析了大型集装箱与常规船型相比较的差异和特点,并对结构设计和制造难点进行探讨,为船厂开发大型集装箱船提供了一些建议。     

Experimental study on the nonlinear pressure acting on a high-speed vessel in regular waves

It is well known that the hydrodynamic responses of a high-speed vessel traveling in regular head waves of even moderate wave height can show significant nonlinear behavior, and so linear statistical techniques become insufficient for predicting the statistics of responses in irregular waves. On the other hand, it has been shown that an approximate third-order Volterra model is applicable to handling the statistics of some nonlinear seakeeping problems, such as motions and vertical hull girder loads. In the present study, the focus is on the nonlinear behavior of the pressure responses of the hull surface, especially on the pressures acting on alternately wet and dry areas near the waterline and on the bow zone with high deadrise angles that may be subject to slight impact and water pile-up effects. To clarify the validity of applying Volterra modeling to this problem, a series of experiments in regular and irregular head waves were carried out, and approximate third-order and fifth-order Volterra models with the proposed algorithm for finding frequency response functions (FRFs) were applied as a means of validation. In the present article, the first part of the validation was performed using experimental data in regular waves. It was confirmed that the third-order Volterra model has adequate accuracy to simulate deterministically the variation of pressure responses in regular waves of different wave steepness up to a wave amplitude to wavelength ratio of 0.01 even for the highly nonlinear pressures acting on the above-mentioned areas of the hull surface.