CG125系列摩托车发动机右曲轴箱体螺孔漏气问题的探讨

通过对CG125系列摩托车发动机右曲轴箱体产品结构分析和用电脑软件演示该产品在压铸生产时的填充、收缩凝固过程,最终采用在厚大部位加镶块让缺陷转移和消除的方法,圆满地解决了该产品在压铸生产时为消除缩孔进行工艺调整时困难及产品加工后因缩孔造成的产品报废.     

越野车空调系统的开发设计

某军用越野车引进的空调系统在试验过程中存在控制系统不能适用、制冷量偏小、噪音大、风量不均匀等问题,根据我国实际使用条件,结合国内空调设计生产情况,对空调系统的参数及结构进行重新设计。提出了加大制冷力度,控制系统改气动控制为电动控制,运用软件对风道工作情况进行模拟分析等方法。试验结果表明,新空调系统完全满足军用要求。     

CO2轿车空调降温性能试验研究

介绍了国内第一台配置CO2空调系统的桑塔纳轿车在环境模拟实验室和道路行驶时空调效果的测试结果,该制冷系统采用铜管铝片式换热器,其尺寸与原HFC134 a系统基本一致,压缩机采用斜盘活塞式,节流机构采用手动控制开度的电子膨胀阀。试验表明此空调器基本能满足降温的需要,但零部件的性能需要改善。     

二甲醚用作汽车空调制冷剂的实验研究

根据二甲醚的热物理性质对二甲醚的制冷循环性能进行了分析,并在R134 a汽车空调系统上对二甲醚的制冷性能进行了测试。结果表明:由于二甲醚的气相和液相黏度都比较小,使用二甲醚作为制冷剂可以减小系统的阻力,有利于系统制冷性能的提高。二甲醚可以直接灌注式替代R134 a,但会造成蒸发器出口过热度降低,需对膨胀阀弹簧预紧力进行调整,才能充分发挥二甲醚的制冷性能。     

别克轿车空气质量流量传感器故障诊断与分析

空气质量流量传感器工作性能稳定与否对电控多点燃料喷射发动机的工作影响很大。针对一款别克GLX轿车出现的动力不足,加速不良且伴有″回火″现象的故障,从验证故障码,检查供油压力和传感器等方面对其进行了诊断分析。诊断分析及修复结果表明,该车装备的旁通道热线式空气质量流量传感器因严重积垢使热传导性变差,导致大流量时其输出信号偏低,从而使混合气过稀是导致上述故障的原因。     

空气悬架系统的干涉应力分析

由于国内特殊的路面条件,导致有些国外比较成熟的产品在国内却出现了很多故障。以几种国内客车常用的典型空气悬架系统的结构分析为例,分析了“干涉应力”产生的原因及可能产生的后果。指出:大部分空气悬架发生故障是由于悬架系统存在“干涉应力,”而悬架结构设计不合理是导致悬架系统产生“干涉应力”的主要原因。建议在设计悬架系统时,尽量避免导致系统产生“干涉应力”的结构出现。     

车用LPG电控发动机排放控制的研究

文中所研究的LPG发动机电控系统综合利用了下列控制策略：基于步进电机步数的LPG燃料精确预控制与空燃比闭环控制；优化发动机起动后及暖机过程的空燃比控制；通过提高怠速及推迟点火的催化器快速起燃控制；通过氧传感器的加热以快速实现发动机起动后的空燃比闭环控制。并对1．8L汽油发动机进行了匹配试验，在兼顾发动机动力性及经济性的前提下有害气体排放达到欧Ⅱ法规的50％。     

Quantifying the environmental impacts of increasing high occupancy vehicle lanes in the United States

To what extent will increasing High Occupancy Vehicle (HOV) lane-kilometer incentivize carpooling and reduce emissions of air pollutants and greenhouse gases? To answer these questions, we develop a multiple regression model relating HOV lanes and other socioeconomic factors to carpooling propensity in all 50 U.S. states and the District of Columbia, then calculate the extent to which increasing HOV lane-kilometers would lead to reductions in carbon dioxide equivalent (CO₂e) and major air pollutants across the U.S., by state. Increasing HOV lane extent has the greatest potential to reduce annual CO₂e in the District of Columbia, followed by Hawaii and New York. The smallest potential is found in states with the lowest population density, led by North Dakota. We then explore the extent to which recommendations made at one level of data aggregation (that of individual states) may be valid for another level, such as individual counties. The only state with sufficient data available to disaggregate the model to the county level is California, where we found a lower potential for state-wide CO₂e emission reductions under the county-level model as compared to the state-level model (0.69% as compared to 1.08%, under the same hypothetical scenario), albeit with significant differences in emission reduction potential between counties with higher vs. lower population densities. This analysis demonstrates the potential to generate generalizable insight into the magnitude of vehicle emission reductions that might be achieved through expanding HOV lanes, and highlights the importance of data disaggregation in identifying the optimal locations for potential reductions.     

Going fast or going green? Evidence from environmental speed limits in Norway

This paper studies the impact of speed limits on local air pollution using a series of date-specific speed limit reductions in Oslo over the 2004–2011 period. We find that lowering the speed limit from 80 to 60 km/h reduces travel speed by 5.8 km/h. However, we find no evidence of reduced air pollution as measured next to the treated roads. Our estimates suggest an annual time loss of the speed limit reductions of 66 USD per affected vehicle. Our findings imply that policy makers need to consider other actions than speed limit reductions to improve local air quality.     

0.1N～20N气浮式力标准机的设计分析

0.1N～20N静重式力标准机采用了新型砝码加载机构,实现了砝码的自动、稳定加载。此外,装置采用自行研制的气浮轴承作为支撑,并对气浮轴承进行了性能试验,满足性能要求,成功取代传统的刀口支撑,大大减少了摩擦扭矩,提高了装置的准确度。