柴油超临界喷雾大涡数值模拟研究

随着现代内燃机燃烧室内温度和压力的不断提升,液体燃料往往处于超临界状态,与亚临界状态相比,其喷雾射流行为特征发生了很大的变化。本研究采用大涡数值模拟方法对超临界环境下的单组分和多组分柴油表征燃料喷雾射流进行数值计算,对比了不同气体状态方程预测柴油表征燃料超临界射流行为的差异性,发现PR气体状态方程对正庚烷质量分数分布的模拟结果与实验值更接近,相较于其他状态方程表现更好;另外还发现本研究采用的多组分柴油表征燃料(正庚烷质量分数80%、甲苯质量分数10%、环己烷质量分数10%)可较好地反映超临界环境下真实柴油喷雾射流特征。     

基于名义应力法的疲劳卡片构建方法研究

基于有限元的疲劳寿命预测可应用于各行业,疲劳寿命预测精度的提高,离不开有效的材料疲劳卡片,疲劳卡片反映了载荷水平与疲劳寿命的关系。通过设计合理的材料试样的疲劳试验,结合试验与有限元计算,计算不同损伤参量创建应用于疲劳寿命分析的材料疲劳卡片,同时对疲劳卡片的仿真精度进行了验证。结果表明,基于名义应力法构建的疲劳卡片具备较高的预测精度,结合材料试验数据与仿真结果构建的多应力比S-N疲劳卡片,可用于其他适用于应力疲劳分析的零部件疲劳寿命分析,为提高零部件疲劳寿命预测精度提供新的技术途径,为零件的前期结构设计提供参考,可在不同领域进行推广并开展进一步分析研究。     

盛洪卿隧道变形的现场监测和数值分析

通过对武九客运专线盛洪卿隧道施工现场监测资料的研究,结合数值分析论证了该隧道河侧采取回填反压变更设计的科学性,并探讨了隧道施工监测的新方法.指出隧道施工监测对于隧道施工质量的提高和运营安全有着重要的指导意义.     

A second order volume of fluid （VOF） scheme for numerical simulation of 2-D breaking waves

Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.     

ARPA模拟海上交通环境的事故分析系统研究

通过阐述ARPA的功能及在海事调查中的作用,提出用ARPA进行海上交通模拟的方法,并在此基础上设计出一种事故分析系统,从而方便对海上交通事故进行统计分析。     

陆标定位在可视化编程中的应用初探

在分析了陆标定位的基础上,通过利用Visual Basic 语言友好的可视化界面,在二维空间内直观、准确、快速的给出了陆标定位在海图上的作图过程,并直观地得到最概然船位的坐标。     

舰船主柴油机双机并车控制仿真技术的研究

从对舰船主柴油机调速的工作原理分析入手,介绍现在常用的3种舰船主柴油机双机并车运行控制技术的原理和特点,然后,利用现在比较流行的仿真应用软件Matlab,建立主柴油机、调速系统和推进装置的仿真模型,并对功率反馈调速器进行仿真试验研究,阐明计算机仿真技术在舰船主柴油机双机并车控制技术研究中的作用。     

航海安全水池三维造波机造波特性与实际波浪模拟应用

对船研所风、浪、流水池造波机的皮特性结合具体工程试验提供一些基本测试参数和使用范围,以波谱形式给出二维不规则波模拟结果,便于今后使用时进行参考。     

文丘利型油燃烧器出口气液两相流动与燃烧的数值模拟

针对选配文丘利型油燃烧器的燃油锅炉中液雾燃烧的特点,在冷态等温流场数值模拟结果及 EBU-Arrhenius模型模拟气相燃烧所得结果的基础上,数值模拟了单只文丘利油燃烧器出口的气液两相 流动与燃烧,给出了流场中的速度场、温度场以及浓度场的分布信息,这些结论可为该型燃油锅炉的进 一步设计和运行以及燃烧室的布置提供有益的依据。     

Innovative strategies for urban car-sharing systems and a simulator to assess their performance

In this paper, three innovative car-sharing systems for urban areas are proposed, based on fleets of individual intelligent vehicles with three service characteristics: instant access, open-ended reservations and one-way trips. These features provide high flexibility but create an uneven distribution of vehicles among stations. Therefore, relocation of vehicles must be performed. Three different system procedures are proposed: in the first system, relocations are performed by users; in the other two, vehicles relocate automatically, thanks to their automation. In the first two systems, vehicles are accessible only at stations, whereas in the third they are also accessible along roads. In order to provide transport managers with a tool to test systems in different realities, an object-oriented simulator is developed. The simulation provides outputs of system performance, in terms of user waiting times and system efficiency. The proposed systems are simulated for the city of Genoa, in Italy, and a comparative analysis is presented.