波浪冲击作用下海洋结构物的动力响应

通过对海洋结构物在波浪冲击作用下动力响应的试验研究,分析了波浪冲击作用下结构物最大动力响应及出现的时间。基于Fourier变换的频谱分析,得到了波浪冲击荷载作用下平台结构的水平和竖向振动特性。当入射波频率接近平台水平固有频率时,在水平方向会产生共振。结构物模型竖向刚度较大,试验中竖向不发生共振。     

系泊船舶运动响应周期试验研究

针对国内外系泊船舶物理模型试验中所给系泊船舶运动响应周期特征参数的不同,对横向波浪作用下一艘26.6×104 m3系泊LNG船舶的运动响应周期特性进行物理模型试验研究。结果表明,半载状态下,纵移运动存在着32 s的自振周期;横移运动为周期性间歇增长运动,横移运动周期与系泊船舶固有横摇周期的比值在1.11～1.23,大体上随波浪周期增大成倍数增长;横摇运动峰值随波浪周期增大而增大,横摇运动周期与系泊船舶固有横摇周期的比值在1.23～1.48,大体上随波浪周期增大成倍数增长;不同装载状态下回转运动均存在着较长的自振周期:半载状态为30 s,满载状态为32 s。     

Validation and application of nonlinear hydrodynamics from CFD in an engineering model of a semi-submersible floating wind turbine

Nonlinear hydrodynamics play a significant role in accurate prediction of the dynamic responses of floating wind turbines (FWTs), especially near the resonance frequencies. This study investigates the use of computational fluid dynamics (CFD) simulations to improve an engineering model (based on potential flow theory with Morison-type drag) by modifying the second-order difference-frequency quadratic transfer functions (QTFs) and frequency-dependent added mass and damping for a semi-submersible FWT. The results from the original and modified engineering models are compared to experimental data from decay tests and irregular wave tests. In general, the CFD results based on forced oscillation tests suggest increasing the frequency-depending added mass and damping at low frequencies compared to first order potential flow theory. The modified engineering model predicts natural periods close to the experimental results in decay tests (within 5%), and the underprediction of the damping is reduced compared to the original engineering model. The motions, mooring line tensions and tower-base loads in the low-frequency response to an irregular wave are underestimated using the original engineering model. The additional linear damping increases this underestimation, while the modified QTFs based on CFD simulations of a fixed floater in bichromatic waves result in larger difference-frequency wave loads. The combined modifications give improved agreement with experimental data in terms of damage equivalent loads for the mooring lines and tower base.     

UHPC薄板屈曲试验及临界板厚比研究

UHPC材料是一种新型纤维增强水泥基复合材料,利用材料强度高的特点设计建造桥梁通常为薄壁箱形结构,薄壁箱梁存在剪力滞效应、扭转畸变、翘曲失稳等问题。为研究UHPC箱梁顶板翘曲失稳,指导UHPC薄壁箱梁结构避免局部失稳破坏先于材料强度破坏,进行不同边界条件均布加载的19个UHPC薄板屈曲荷载试验研究。结果表明:UHPC板的屈曲主要有局部受压破坏、单方向裂缝破坏和双向裂缝破坏3种;屈曲荷载计算应引入材料和制作修正系数0.7;UHPC板最大幅值位于h/2高度,并只产生一个半波。最后对屈曲荷载试验值进行有限元计算分析对比,并通过欧拉公式推导UHPC箱梁顶板的临界板厚比限值。     

Numerical modelling of hydrodynamic responses of Ocean Farm 1 in waves and current and validation against model test measurements

With the continuous growing of the aquaculture industry and increasingly limited fish farming sites at close to shore areas both in Norway and worldwide, there is a need to develop fish farms suitable for aquaculture production in typical offshore environments. For this purpose, SALMAR has developed and deployed the Ocean Farm 1 facility for offshore fish farming.The main purpose of this paper is to develop a reliable numerical model and investigate the motion responses of the Ocean Farm 1 structure in waves and current. The established numerical model consists of the Ocean Farm 1's frame structure (with rigidly-connected circular column components), the net and the mooring system. The hydrodynamic external loads and coefficients of the frame structure are obtained by using potential flow theory. The quadratic drag load on the individual circular columns of the frame structure is formulated by a given drag coefficient. The loads on the net are formulated by using the screen model, where the Reynold number dependent lift and drag forces are formulated as a function of the solidity ratio Sn of the net, relative inflow angle and velocity. The hydrodynamic loads on the mooring lines are formulated using the Morison's equation and the structural responses of the mooring lines are obtained using a nonlinear FE model.With the developed numerical model, time domain simulations are performed. The simulation results are firstly validated against measured data from the decay tests, current tests, and regular wave tests. After the validation, numerical simulations are performed in different irregular wave and current combined weather conditions and the obtained motion response of Ocean Farm 1 are discussed and compared with available measurement data.     

机车对轨道横向随机不平顺的响应

本文用谱分析方法，分析和计算了机车在直线轨道上匀速运行时对轨道横向随机不平顺输入的动力响应，计及了轨道的横向弹性及轮轨间的非线性几何关系。在计算中采用统计线性化方法和迭化法，将结果与线性情况作了比较。     

A general scaled model design method of stiffened plate subjected to combined longitudinal compression and lateral pressure considering the ultimate strength and collapse modes

A general and efficient scaled method for stiffened plates subjected to combined longitudinal compression and lateral pressure is proposed based on slenderness, simply by adjusting the number of stiffeners. The design method makes it easier to determine the dimensions of the scaled model for a given scale ratio compared with the previously proposed method. The emphasis is on the influence of the plate slenderness, the column slenderness, and the non-dimensional parameter of the lateral pressure on the ultimate strength. By maintaining the consistency of the plate slenderness and column slenderness, the proposed method is applicable for designing scaled models with materials of different yield stresses and Young's moduli. A similar effect of the lateral pressure on the ultimate strength of the prototype and scaled models is achieved by maintaining the non-dimensional parameter. In addition, the applicability of the scaled method to the initial deflection is considered, which provides a reference for similar models. The similitude of the scaled method is verified for several typical buckling modes, including the beam–column, tripping, web and overall collapse modes. Given the numerical results, the proposed general and fast scaled method can provide reasonable dimensions of scaled stiffened plates subjected to combined loads.     

砰击载荷作用下船底肋骨等效设计压力的确定

通过一个船体二维分段的自由落体试验,测量模型入水速度、砰击压力和结构响应,获得模型底部板架在砰击载荷作用下的响应特征;对结构模型在均布静压力作用下的应力响应进行有限元分析;比较试验和计算得到的应力响应,获得作用在模型肋骨上的砰击压力的折减系数,从而使该结构在设计时仍可按常规的静力计算方法进行强度校核。该折减系数与船体入水速度成线性关系,在已知船体设计入水速度和试验压力分布时,可以获得船体设计均布静压力。     

船舶靠绑作业系统试验模拟与测试技术

风浪作用下船舶系泊靠绑进行补给、救生与货物转运等作业是一个非常复杂的过程,在波浪水池中进行模型试验,了解靠绑作业系统的运动和受力特性,必须考虑每一个细节.本文针对系泊靠绑模型试验,重点介绍了缆绳、碰垫非线性弹性特性和系泊缆绳上补偿力模拟与测试方法,以及靠绑船舶的运动响应测试,并给出了部分模型试验结果.从模拟的缆绳和碰垫弹性曲线及系泊缆绳上补偿力试验结果来看,文中所用的缆绳、碰垫和缆绳上补偿力模拟方法是成功的,非接触式光学运动测量系统能方便地进行靠绑船舶运动响应测试,可以应用于今后其他类似模型试验中去.