上海地铁AC03型电动列车客室车门故障分析及解决措施

上海地铁AC03型电动列车采用电动塞拉门,对车门的尺寸有很高的要求。由于车门的尺寸超差多次引起故障。从车门的关门限位开关、紧急解锁装置及其限位开关、车体水密性等的安装调整尺寸进行分析,并提出了相应的解决措施,排除了由此而带来的对列车正线运营的影响。     

第三方物流信息系统运输子系统的设计

为了降低第三方物流信息系统运输子系统设计的复杂性,在系统结构设计中,将运输子系统分为业务系统、监控、查询与统计、财务接口与运费调整的审核5个部分;在业务流程设计中,用Petri网对大部分业务逻辑加以描述,以优化运输子系统;在数据库设计中,从单据中识别实体,根据界面绘制数据流图,从E—R图中识别实体之间的关系,将其转化为关系模型,成为数据库中表的基本结构,提出以“族”的概念组织实体集和数据库表,将根据物理数据模型建立的125张表分成了14个族。此结构设计方法简化了第三方物流信息系统运输子系统的结构,提高了工程质量。     

跨海大桥承台钢套箱底板对阴极保护系统的影响

跨海桥承台采用钢底板封底,诸多因素使得钢底板与钢管桩之间绝缘性难以保证。钢底板为裸钢,连入钢管桩阴极保护系统影响较大。分析电阻法测量法不能准确判断钢底板与钢管桩的电连接的原因,认为采用半电池电位法测量更为可靠,同时分析钢底板对钢管桩阴极保护的发射电流和使用寿命的影响程度,提出相应的补救措施。     

改进的疲劳裂纹扩展率模型及其参数估算方法

疲劳裂纹扩展率曲线是任何基于裂纹扩展理论的疲劳寿命预报方法的基本疲劳特性。论文作者们提出了一种改进的疲劳裂纹扩展率模型,它可以解释金属疲劳试验中观察到的各种现象。为了便于工程应用,文中也给出了如何利用除裂纹扩展试验以外的其它试验结果来估算该模型参数的方法。文中还对恒幅载荷下该模型及其参数估算方法对HTS-A钢的适用性进行了分析,分析结果将为利用该模型预报由HTS-A型钢制成的海洋结构物的疲劳寿命提供基础。     

CFD Analysis of Flow Characteristics of Corrugated Louvered Fins at Low Reynolds

A 2-D laminar flow model was established for CFD analysis of air-flow between louvered fins. Two louvered fins are studied based on commercial software FLUENT. Air-flow pressure drop characteristics are derived on the calculation of Reynolds number from 75.3 to 600.The numerical results are in good agreement with the experimental data when Reynolds is lower.     

Analysis on the Irregular and Asymmetrical Power／Ground Structure by PEEC Modeling

In order to provide some reference for the design of the power/ground system, a complicated power/ground sys, tem in time and frequency domains was analyzed, which is based on PEEC (Partial Element Equivalent Circuit). According to tlhe actual requirements, characteristics of some common power/ground structures in time and frequency domains, such as SSN (Simultaneous Switching Noise), are obtained for the future research. The results show the first resonance point is changed with the structure of the power/ground networks.     

Research in Green Modularity Design Methodology

Green design and manufacturing is a proactive approach to minimize wastes during a product＇s design stage, thus preventing future environmental impacts. Current modular design method mainly focuses on product functional and manufacturing issues. In this paper, a theoretical scheme of multi-objective modularity analysis for discrete electromechanical product design was proposed. Product physical architecture was represented by a fuzzy graph, where fuzzy relationships contain environmental objectives and influence module formulation. Finally the optimal product modules combining all objectives can be searched by clustering algorithm.     

基于ITS和EC的智能物流系统

在分别介绍智能交通系统(Intelligent Transportation System. ITS)和电子商务 (Electronic Conunerce, EC)以及现代物流研究现状的基础上文章首次提出了基于ITS和EC 的智能物流系统的概念.同时本文还提出了智能物流系统的研究方向和逻辑框架结构.     

数字图书馆中的元数据技术应用分析与实现

在分析元数据技术应用模型及其在数字图书馆中运用的基础上,研究并提出对各类海量数字信息进行织、检索、访问和利用实现方案,设计并实现了元数据管理信息系统MDMIS.     

单燃料LPG电喷发动机的排放试验研究

通过优化发动机压缩比,调整点火提前角,改善了LPG电喷发动机的燃烧过程。实验结果表明,电控喷射LPG燃气发动机外特性功率、转矩的最大下降较原汽油机分别小于3.0％、3.2％;在常用部分负荷工况,发动机CO排放小于1％、HC排放小于150×10-6,NOx排放也得到较大幅度改善。