我国城市现阶段经济、社会功能定位新探

在我国当前的经济建设中，城市面临着模式转型的过程，同时也面对着不断产生的一系列新矛盾和新要求。文章着重对此加以探讨，并就我国新时期城市功能的新定位提出了建设性意见。     

基于ABAQUS的地质偏压隧道非线性接触分析

针对于山岭隧道常出现的,穿越倾斜产状的层状岩体,或多在隧道进出口处节理裂隙发育的情况,结合成兰铁路茂县隧道出口地段所处的地质偏压环境,应用ABAQUS有限元分析软件中的面-面接触单元,建立节理软弱结构面的二维隧道模型。并对地质偏压隧道的围岩压力及衬砌结构内力进行非线性接触分析和计算,初步得出单线铁路隧道在地质偏压情况下围岩和衬砌结构的位移、应力的分布特征,并讨论软弱结构面的摩擦系数对隧道偏压作用的影响,根据隧道受力特点提出隧道在地质偏压情况下可能采取的建议和措施。     

Experimental study on a model azimuthing podded propulsor in ice

The objective of this study was to investigate the performance of a model azimuthing podded propulsor in ice-covered water. Model tests were carried out with two different depths of cut into the ice (15 and 35 mm), two different ice conditions (presawn and pack ice conditions), and four different azimuthing angles. The depth of cut is the maximum penetration depth of the propeller blade into the ice block. The 0.3-m-diameter model propeller was operated in a continuous ice milling condition. Ice loads were measured by several sensors which were installed in various positions on the model. Six one-axis pancake-style load cells on the top of the model measured the global loads and two six-component dynamometers were installed on the shaft to measure the shaft loads. One six-component dynamometer was attached to the one of the propeller blades inside the hub to measure the blade loads. The pod unit and propeller performance in ice are presented. Ice-related loads, which were obtained when the blade was inside the ice block, are introduced and discussed. During the propeller–ice interaction, a blade can experience the path generated by the previous blade, which is called the shadowing effect. The effects of shadowing, depth of cut, azimuthing angle, and advance coefficient on propulsor performance are presented and discussed.     

Simulation of dynamic interaction between train and railway turnout

Dynamic train–track interaction is more complex in railway turnouts (switches and crossings) than that in ordinary tangent or curved tracks. Multiple contacts between wheel and rail are common, and severe impact loads with broad frequency contents are induced, when nominal wheel–rail contact conditions are disturbed because of the continuous variation in rail profiles and the discontinuities in the crossing panel. The absence of transition curves at the entry and exit of the turnout, and the cant deficiency, leads to large wheel–rail contact forces and passenger discomfort when the train is switching into the turnout track. Two alternative multibody system (MBS) models of dynamic interaction between train and a standard turnout design are developed. The first model is derived using a commercial MBS software. The second model is based on a multibody dynamics formulation, which may account for the structural flexibility of train and track components (based on finite element models and coordinate reduction methods). The variation in rail profile is accounted for by sampling the cross-section of each rail at several positions along the turnout. Contact between the back of the wheel flange and the check rail, when the wheelset is steered through the crossing, is considered. Good agreement in results from the two models is observed when the track model is taken as rigid.     

两种舰船—飞机耦合系统的降阶建模方法

舰船的运动和甲板的变形，对着舰飞机的冲击载荷会产生影响，而该冲击载荷又会直接影响飞行甲板的变形，因此两者的运动是耦合的，需要把它们作为一耦合系统进行分析。本文对该耦合系统提出了两种降阶建模方法。该方法首先对飞行甲板进行动力缩聚，使其只包含在整个降落过程中会与飞机起落架的运动发生耦合的所有自由度，然后把降阶了的模型与飞机一起建工耦合动力学方程。运用该方法建立起来的动力学方程规模将大大减小。通过对某型号飞机及舰船计算表明，本文提出的方法是可行的。     

四阶段交通预测模型基础数据库设计

基础数据是交通模型的根本，一个好的基础数据库也是交通模型可靠性的有力保障。本文分析了建立四阶段交通规划模型的数据需求，并对其来源进行了分析，提出了最基本的交通模型数据库结构。     

AHP法在崇启高速公路生态环境综合影响评价中的应用

构建压力—状态—响应框架模型。对于可定量分析的指标,采用实地监测的方法来获取,对于定性描述的指标,采用专家咨询和分级打分的方法来获取。得到各个评价因子的数值后,采用层次分析法(AHP)来确定各个影响因子的权值,最后加权平均。以崇启高速公路施工期和营运期为例,对生态环境进行分析和评价。     

一种浮标自由上浮模型试验换算方法

对浮标自由上浮模型试验过程中的受力进行分析,提出一种预报浮标实尺在水下自由上浮过程中最大稳定速度的方法,预报结果与CFD模拟的结果相近.     

浅析盾构隧道模型试验的现状与发展

模型试验是盾构隧道相关研究工作中常用的研究手段。文章对目前盾构隧道模型试验所涉及到的问题进行了系统总结分析,将其归结为管片结构的受力问题、隧道结构本身的分析模型问题、结构与围岩的相互作用问题、开挖面稳定问题、结构与邻近结构物的相互作用问题、隧道施工扰动与控制问题,以及其他问题等。通过典型模型试验实例,对每类问题进行了分析阐述,系统归纳了模型试验在盾构隧道相关研究工作中的进展和成果。针对盾构隧道模型试验经常涉及到的诸如结构模型、模型土、模型箱等材料的选择,加载方案的设计,以及试验方案的综合设计等问题进行了阐述分析,并针对性地提出了意见和建议。     

A topological route choice model for metro

This article presents a route choice model for public transit networks that incorporates variables related to network topology, complementing those found in traditional models based on service levels (travel time, cost, transfers, etc.) and users’ socioeconomic and demographic characteristics (income level, trip purpose, etc.). The topological variables represent concepts such as the directness of the chosen route and user knowledge of the network. For both of these factors, the necessary data is endogenous to the modelling process and can be quantified without the need for information-gathering beyond what is normally required for building route choice models. Other novel variables in the proposed formulation capture notions of user comfort such as vehicle occupancy rates and certain physical characteristics of network stations. We conclude that these new variables significantly improve the explanatory and predictive ability of existing route choice specifications.