Greenhouse gas emissions from ships in ports – Case studies in four continents

Emissions of GHG from the transport sector and how to reduce them are major challenges for policy makers. The purpose of this paper is to analyse the level of greenhouse gas (GHG) emissions from ships while in port based on annual data from Port of Gothenburg, Port of Long Beach, Port of Osaka and Sydney Ports. Port call statistics including IMO number, ship name, berth number and time spent at berth for each ship call, were provided by each participating port. The IMO numbers were used to match each port call to ship specifications from the IHS database Sea-web. All data were analysed with a model developed by the IVL Swedish Environmental Research Institute for the purpose of quantifying GHG emissions (as CO₂-equivalent) from ships in the port area. Emissions from five operational modes are summed in order to account for ship operations in the different traffic areas. The model estimates total GHG emissions of 150,000, 240,000, 97,000, and 95,000 tonnes CO₂ equivalents per year for Gothenburg, Long Beach, Osaka, and Sydney, respectively. Four important emission-reduction measures are discussed: reduced speed in fairway channels, on-shore power supply, reduced turnaround time at berth and alternative fuels. It is argued that the potential to reduce emissions in a port area depends on how often a ship revisits a port: there it in general is easier to implement measures for high-frequent liners. Ships that call 10 times or less contribute significantly to emissions in all ports.     

Tuning of transfer functions for analysis of wave–ship interactions

Transfer functions are often used together with a wave spectrum for analysis of wave–ship interactions, where one application addresses the prediction of wave-induced motions or other types of global responses. This paper presents a simple and practical method which can be used to tune the transfer function of such responses to facilitate improved prediction capability. The input to the method consists of a measured response, i.e. time series sequences from a given sensor, the 2D wave spectrum characterising the seaway in which the measurements are taken, and an initial estimate of the transfer function for the response in study. The paper presents results obtained using data from an in-service container ship. The 2D wave spectra are taken from the ERA5 database, while the transfer function is computed by a simple closed-form expression. The paper shows that the application of the tuned transfer function leads to predictions which are significantly improved compared to using the transfer function without tuning.     

谈港口国船舶污染物接收设施问题报告的处置

文中探讨了一起国际航行船舶关于港口国船舶污染物接收设施问题报告的调查情况,介绍了此次船舶污染物接收设施问题报告的原因分析及采取的措施,并向接收设施的提供者和使用者给出了优化建议,明确了各有关部门在港口国船舶污染物接收设施履约工作上的重点。     

Full six degrees of freedom coupled dynamic simulation of ship collision and grounding accidents

By taking advantage of the user-defined load subroutine (loadud) and the user common subroutine (usercomm) in LS-DYNA, the authors proposed a new coupled approach for simultaneously calculating structural damage and the planar 3DOF ship motions in ship collisions. The coupled procedure aimed at predicting the detailed structural damage together with reasonable global ship motions. This paper extends the method to consider the full 6DOF ship motions; thus, ship collision as well as grounding accidents can be properly handled. This method is particularly useful for design purposes because the detailed ship hull profile is not needed.A traditional ship maneuvering model is used for the in-plane surge, sway and yaw degrees of freedom with a series of nondimensional coefficients determined from experiments. It is assumed that the out-of-plane degrees of freedom are not coupled with the in-plane ship motions, and there is no coupling among roll, pitch and heave motions. The implementation is verified through free decay tests, and the obtained natural periods show good agreement with theoretical results.Several collision and grounding cases are simulated in which a supply vessel crashes into rigid plates with different orientations. The effects of the roll motion, the heave and pitch motions and the full 6DOF motions are studied. The results are compared with those from a 6DOF decoupled method. Ship motions through the proposed method compare reasonably well with SIMO results. It is found that several consecutive impacts may occur in the simulation of one collision case due to the periodic motions. This is not taken into account in the decoupled method, which makes this method unconservative.     

试论船舶电气图纸审查的基本方法与注意要点

文章根据船舶电气图纸审查工作经验对船舶电气图纸审查的目的和意义、审查依据、送审图纸目录、审查要求等内容进行了归纳与总结,介绍了电气图纸审查的基本方法与注意要点,提出图纸审查过程中应注意的几个问题。     

舰船电力系统保护性能优化的自适应算法

为满足舰船电力系统保护在快速性和选择性方面的要求,提出保护性能优化模型,根据电力系统的运行方式、拓扑结构和故障类型的变化,实时在线计算并修改保护整定值的自适应保护方法。将快速性和选择性指标作为保护性能综合指标的基本元素,采用模拟退火粒子群算法进行优化,最终实现不同运行工况下保护性能最优的整定值自适应调整。并在PSCAD/EMTDC软件中建立包含自适应保护算法的舰船电力系统保护仿真模型,仿真结果证明所提方法可有效提高系统保护性能。     

基于Cruise-Carsim联合仿真的电动汽车动力性经济性分析

为了解决单一软件对电动汽车性能仿真分析中存在的误差和不足的问题,提出了一种基于Cruise-Carsim联合仿真的建模方法.首先将Carsim中内置的传动系统与Simulink平台建立的电池、电机及控制策略模型相匹配,建立了某型电动汽车的Carsim整车模型,然后将Cruise中建立的以传动系统为核心的电动汽车模型与C...     

Benefit of speed reduction for ships in different weather conditions

Currently, the shipping industry is facing a great challenge of reducing emissions. Reducing ship speeds will reduce the emissions in the immediate future with no additional infrastructure. However, a detailed investigation is required to verify the claim that a 10% speed reduction would lead to 19% fuel savings (Faber et al., 2012).This paper investigates fuel savings due to speed reduction using detailed modeling of ship performance. Three container ships, two bulk carriers, and one tanker, representative of the shipping fleet, have been designed. Voyages have been simulated by modeling calm water resistance, wave resistance, propulsion efficiency, and engine limits. Six ships have been simulated in various weather conditions at different speeds. Potential fuel savings have been estimated for a range of speed reductions in realistic weather.It is concluded that the common assumption of cubic speed-power relation can cause a significant error in the estimation of bunker consumption. Simulations in different seasons have revealed that fuel savings due to speed reduction are highly weather dependent. Therefore, a simple way to include the effect of weather in shipping transport models has been proposed.Speed reduction can lead to an increase in the number of ships to fulfill the transport demand. Therefore, the emission reduction potential of speed reduction strategy, after accounting for the additional ships, has been studied. Surprisingly, when the speed is reduced by 30%, fuel savings vary from 2% to 45% depending on ship type, size and weather conditions. Fuel savings further reduce when the auxiliary engines are considered.     

碰撞危险局面下VTS值班员交通组织及值班用语规范初探

文中以一起典型的VTS覆盖水域船舶碰撞危险事件为例,论述了碰撞危险局面下VTS值班员交通组织的依据、措施建议和值班用语规范,为规范VTS值班员的交通组织标准提供思路.     

基于规范方法的小水线面双体船疲劳强度研究

论文介绍了船舶结构疲劳强度评估基本原理,并对一条2200t级小水线面双体船进行规范法疲劳强度评估。针对小水线面双体船结构特点,采用规范进行疲劳载荷计算;结合全船有限元计算结果进行疲劳部位筛选;采用有限元法提取疲劳部位的热点应力,并计算疲劳部位的累积损伤度。分析计算结果,提出疲劳部位优化方案。