深海吸力式锚桩极限承载力研究

研究目的:深海吸力式基础的极限承载能力是海洋工程结构设计中的一个关键问题。准确求解吸力锚桩的极限承载力,能够为深海海洋结构物的稳定性提供技术保障;同时,研究深海吸力锚桩极限平衡条件下的失稳机理,可以为进一步深入研究极限承载力奠定理论基础。研究结论:结果表明,本文给出的位移加载模式,能够较为准确地求解水平载荷与竖向载荷共同作用情况下吸力式基础的极限承载力;吸力式锚桩的极限承载力及其稳定性,受水平载荷和竖向载荷的比值以及作用点的位置影响较大。本文工作为工程实际和理论分析提供了技术支持和理论指导。     

交直流转换场牵引供电系统技术研究

新建水曹铁路(AC25kV)与既有卑水线(DC1650V)在木厂口站接轨,本文以"如何实现2种制式供电系统的安全可靠转换"为目的,借鉴国外经验,结合工程实际,研究在木厂口车站设计"交直流转换场"牵引供电系统技术方案及操作程序。     

运用经济杠杆长效治理超载超限运输

分析了经济利益贯穿的货主—运输业户—车辆生产、改装厂家的超载超限运输链条的成因、现状和危害;提出了要从以核定载质量为依据转而以货车实际总重和轴载限额为依据对货车实施计重收费的思路,通过区别对待,体现公平,分步推进,累积治理,实现运用经济杠杆,达到长效治理超载超限运输的目的;阐述了江苏、河南、青海等省份实行计重收费所产生的积极效果以及他们推广的安排;提出在计重收费方法以及低速动态轴载称重设备精度、可靠度和价格方面还需要进一步探讨。     

旧水泥混凝土路面FWD实测数据的分析

基于某国道的FWD实测数据,分析FWD参数与旧水泥混凝土路面状况(现场调查实录及测试数据)间的某些相关性,探索旧水泥混凝土板的接缝传荷能力、弯曲刚度、综合承载能力等定性或定量的判别方法,提出利用FWD加载中心弯沉值总水平评价旧水泥混凝土路面综合承载能力的设想。     

钢管活性粉末混凝土轴压短柱受力性能试验研究

进行22根钢管活性粉末混凝土(钢管RPC)轴压短柱试验,分析其荷载-变形曲线、破坏特征和影响极限承载力的主要因素。试验研究表明:钢管RPC轴压短柱的荷载-纵向应变曲线弹性阶段约为极限荷载的90％~95％;套箍系数ξ较小时,在达到极限荷载后承载力急剧下降;ξ较大时,在达到极限荷载后承载力下降平缓并呈回升趋势。ξ较小的试件多呈剪切破坏形态;ξ较大的试件所有断面上均被墩粗,试件的上、下两端明显局部鼓曲。构件承载力随RPC强度fc的提高而提高,两者基本成线性关系;套箍系数ξ越大,构件承载力也越大,但钢管对RPC的约束效果比对普通混凝土的差。提出的钢管RPC轴压短柱极限承载力的实用计算公式计算出的结果与试验结果吻合良好。     

基于语义的可定制数据切分和动态加载方法

文章提供一种基于语义的可定制数据切分和动态加载方法，它能够对源数据库建立基于语义的元数据描述，根据不同用户的数据需求，依据数据的语义相关性，转化并归纳为通用的策略模版，基于策略进行数据的切割和数据的级联抽取。之后，采用容错式动态加载方法。这在一定程度上实现了异构数据库之间的批量数据迁移。     

Controller design for gating traffic control in presence of time-delay in urban road networks

Recent studies demonstrated the efficiency of feedback-based gating control in mitigating congestion in urban networks by exploiting the notion of macroscopic or network fundamental diagram (MFD or NFD). The employed feedback regulator of proportional-integral (PI)-type targets an operating NFD point of maximum throughput to enhance the mobility in the urban road network during the peak period, under saturated traffic conditions. In previous studies, gating was applied directly at the border of the protected network (PN), i.e. the network part to be protected from over-saturation. In this work, the recently developed feedback-based gating concept is applied at junctions located further upstream of the PN. This induces a time-delay, which corresponds to the travel time needed for gated vehicles to approach the PN. The resulting extended feedback control problem can be also tackled by use of a PI-type regulator, albeit with different gain values compared to the case without time-delay. Detailed procedures regarding the appropriate design of related feedback regulators are provided. In addition, the developed feedback concept is shown to work properly with very long time-steps as well. A large part of the Chania, Greece, urban network, modelled in a microscopic simulation environment under realistic traffic conditions, is used as test-bed in this study. The reported results demonstrate a stable and efficient behaviour and improved mobility of the overall network in terms of mean speed and travel time.     

Centrifuge modelling of pipe-soil interaction in clay with crust layer

Seabed in regions, such as the Gulf of Guinea and North West Shelf of Australia, may exhibit a crust layer where the undrained shear strength can be an order of magnitude higher than that of the immediately underlying sediment. This can complicate design of steel catenary risers, where fatigue depends on the cyclic vertical stiffness of the pipe-soil interaction. Potential punch-through of the riser into the underlying soft soil may invalidate design assumptions based on the pipe-soil stiffness within the crust layer. The long-term evolution of pipe-soil stiffness within the crust layer, which exhibits similar properties to an over-consolidated soil, is also poorly understood. This paper describes centrifuge model tests undertaken in a clay sample with a crust layer, simulating the punch-through process of a pipe under load control and investigating the pipe-soil stiffness during long-term cyclic loading tests under displacement control. Results confirm that the potential for punching-through the crust layer depends strongly on the relative ratio of pipe diameter to crust layer thickness. The long-term evolution of pipe-soil stiffness showed a steady increase after an initial remoulding stage in contractile soils (normally consolidated and lightly over-consolidated), but a steady reduction in the heavily over-consolidated, more dilatant, crust. The magnitude of pipe-soil stiffness changes (during both remoulding and reconsolidation) is governed by the over-consolidation ratio of the soil and the amplitude of the cyclic displacements. This study provides insights on the relevant cyclic stiffness to consider when assessing SCR fatigue life in over-consolidated soils and soils exhibiting a superficial crust layer.     

浅析西门子BDPC系统在CTV上的 可行性

本文主要目的是分析西门子Blue Drive Plus C（随后简称BDPC）系统及其配置是否能够应用在深水动力定位原油输送船（随后称CTV）上。通过供需关系对比法,首先实现CTV实现海上自由航行、跟随定位、连接FPSO与～30万吨油轮之间浮管、加油跟随定位、紧急脱离、绿色环保运行等工况下的正常与应急储备动力需求,随后分析西门子BDPC直流系统及其运用技术,针对本项目提供的特殊配置,与CTV提出需求进行对比,结论是BDPC依靠它的直流发电、配电、逆变、储能等技术,可以满足CTV的配置需求,论证了BDPC系统运用在性能优越的深水原油输送装置CTV是可行的。     

大极差情况下载荷试验承载力取值计算

对于载荷试验的大极差,各种规范没有给出统一的规定,试验数据的处理比较随便,造成不经济或不安全。当极差大于30%平均值或最大值与最小值之比大于1.3时,承载力取值可采用离群值剔除法、变异系数折减法确定。案例计算分析表明,给出的计算公式合理、计算简单方便,可用于各种载荷试验确定承载力。