铁道机车车辆焊接结构焊接成型过程数值分析

针对目前焊接成型过程数值分析状况,文章介绍了焊接成型数值分析理论方法,对焊接温度场分析存在的问题及焊接残余应力和变形的影响因素与产生机理进行详细阐述,分析总结焊接成型数值分析过程存在的难点。针对这些难点,概述近年来新技术方法的应用情况及焊接成型数值分析的软件工具,提出今后的焊接成型数值分析的发展方向。     

两种底架设备悬挂座的对比分析

针对目前城轨车辆底架设备悬挂的现状,分析焊接悬挂座在应用中存在的问题,结合焊接悬挂座的结构,设计改进出一种新的不锈钢铸造悬挂座,并从多个角度对比焊接与铸造方案,通过对比验证新方案的合理性。     

钢制车体疲劳强度校核方法

介绍了在缺乏材料疲劳性能数据时进行钢制车体疲劳强度校核的方法,从静态应力极限值和焊接疲劳数据的选取、Goodman疲劳极限线图的绘制方法、常用焊接接头类型、疲劳许用应力极限的确定、设计应用等方面对该方法进行了讨论。     

Q355GNHD高耐候钢在动车组中的焊接运用

详细介绍了出口突尼斯动车组车体钢结构的特点,通过各部位焊接工艺试验,结合车体钢结构组装焊接工艺,选取了与之匹配的焊接材料Q355GNHD高耐候钢,确定了合适的焊接工艺参数,并制定出该车的生产工艺方案,满足了产品设计的制造需要。     

高强钢焊接工艺研究及分析

通过对Q550D低合金高强度结构钢的焊接影响因素进行分析,制定合理的焊接工艺,应用该焊接工艺保证低合金高强度结构钢的焊接效果。     

铸钢件与无缝钢管焊接技术

结合京沪高速铁路镇江南站站房工程铸钢件同无缝钢管焊接施工中一些技术工作及相关经验,通过设计院的相关设计文件及现场焊接工艺的指导,经过权威专家的评审,最终根据焊接的成果总结出了在管桁架结构的现场安装中铸钢件同无缝钢管的焊接工艺及注意要点。     

胶焊,点焊和胶接接头应力分布的比较分析

采用三维弹塑性有限元数值分析方法，比较了分析了胶焊，点焊和胶接接头的应力分布情况，结果表明，胶焊接头与胶接接头的应力分布特征值基本相同，仅在焊点区内略有区别，胶焊接头中的胶粘剂有效地降低了点焊接头中焊点的应力，消除了其焊点过级处的应力集中，所得应力分布可合理解释已有强度试验结果。     

激光焊接技术在载货车驾驶室顶盖柔性制造中的应用研究

将激光焊接技术应用在载货车驾驶室试制中的柔性制造，利用进口的三维五轴CO2激光加工机成功地完成了大型三维驾驶室顶盖激光对接焊，试制的顶盖完全达到产品图纸要求。研制了顶盖激光切割、焊接专用夹具，并针对车身常用裸板和镀锌钢板进行了工艺试验。     

Predicting the adoption of connected autonomous vehicles: A new approach based on the theory of diffusion of innovations

On the grounds that individuals heavily rely on the information that they receive from their peers when evaluating adoption of a radical innovation, this paper proposes a new approach to forecast long-term adoption of connected autonomous vehicles (CAVs). The concept of resistance is employed to explain why individuals typically tend to defer the adoption of an innovation. We assume that there exists a social network among individuals through which they communicate based on certain frequencies. In addition, individuals can be subject to media advertisement based on certain frequencies. An individual’s perceptions are dynamic and change over time as the individual is exposed to advertisement and communicates with satisfied and dissatisfied adopters. We also explicitly allow willingness-to-pay (WTP) to change as a result of peer-to-peer communication. An individual decides to adopt when (i) there is a need for a new vehicles; (ii) his/her WTP is greater than CAV price; and (iii) his/her overall impression about CAVs reaches a cutoff value. Applicability of the proposed approach is shown using a survey of employees of the University of Memphis. Our results show that the automobile fleet will be near homogenous in about 2050 only if CAV prices decrease at an annual rate of 15% or 20%. We find that a 6-month pre-introduction marketing campaign may have no significant impact on adoption trend. Marketing is shown to ignite CAV diffusion but its effect is capped. CAV market share will be close to 100% only if all adopters are satisfied with their purchases; therefore, the probability that an individual becomes a satisfied adopter plays an important role in the trend of adoption. The effect of the latter probability is more pronounced as time goes by and is also more prominent when CAV price reduces at greater rates. Some caveats may be inserted when considering the study results as the findings are subject to sample bias and data limitations.     

轨道客车不锈钢车体电化学钝化工艺研究

文章通过显微组织、显微硬度、电化学性能表征测试,分析了不锈钢车体焊缝及热影响区的组织变化及性能差异,研究了钝化道次、移动速度等电化学钝化工艺参数对焊接接头及热影响区耐蚀性的影响规律.试验结果表明:焊接热影响区显微组织发生明显改变,显微硬度下降,表面耐蚀性明显下降,当以10 mm/s单道次钝化作业时,点蚀电位最高,耐蚀性最好,30天盐雾试验后,钝化处理表面未发现明显锈蚀.该工艺已在公司进行了推广应用,效果良好.