基于AQWA计算规则波中新型海工船的运动响应

本文应用三维势流理论的水动力软件AQWA分析一种新型工程船舶在波浪中的运动响应,新型船为改造的波兰中型集装箱船B-573,设计搭载Pram型艉和POD吊舱式推进系统的新型海工船.本文计算此船在规则波中不同浪向角条件下的六个自由度的频域和时域的运动响应,得到在不同浪向角下船体的响应振幅算子RAO,计算船舶顺浪下不同船速的垂荡RAO以及纵荡、垂荡和纵摇三个自由度的一阶、二阶波浪力,分析结果显示该新船型具有良好的耐波性.     

CFRP加固损伤钢板的拉伸及疲劳性能研究

文章基于Dugdale模型理论提出CFRP加固含裂纹钢板加固量的计算方法。通过虚拟裂纹闭合法建立模型来模拟塑性钢板的破坏过程,并完成相关试验,验证了CFRP加固含裂纹钢板有效粘贴长度、有效粘贴宽度取值的有效性。同时利用Paris公式预估疲劳寿命,并结合相关试验数据,探究了CFRP加固对含裂纹钢板疲劳寿命的提高作用。研究表明,有效粘贴长度、有效粘贴宽度的理论取值有效;通过CFRP双侧加固竖裂纹、斜裂纹钢板构件可分别使其疲劳寿命得到显著提高。     

基于改进移动最小二乘法的结构可靠性分析

基于改进移动最小二乘法对结构可靠性问题进行分析,数值模拟结果表明,改进方法可有效提高计算精度.具体方法是使用椭圆范数代替二范数来度量样本点到中心点的距离,并根据上次迭代所得到的响应面在中心点处的法向量与坐标轴所成角度,对影响域进行旋转变换;从而将样本点的权重大小由样本点与中心点、响应面的距离共同决定,并将每次迭代得到的响应面函数在中心点处的法向信息包含在内.     

基于磁流变弹性体的船舶轴系纵振动力吸振器的实验研究

磁流变弹性体是一种新型的智能材料,由微米级的羰基铁粉和聚合物合成.由于它具有弹性模量可调、无需封装、稳定性好、响应快等优点,已被广泛应用于机械振动控制等领域.文中针对船舶推进轴系纵振动力学特性,提出一种固有频率可调的磁流变弹性体动力吸振器用于轴系纵振控制.首先理论分析了安装动力吸振器的推进轴系的动力学模型,其次对动力吸振器进行了移频特性试验,并在1:4的船舶轴系缩比模型上进行了变转速工况下吸振效果试验.实验结果表明,该吸振器具有12.3 Hz的移频范围,并且在不同轴系工作转速下相比于被动式吸振器均有更好的吸振效果.     

超声冲击处理对高强钢焊接接头残余应力影响的数值模拟

超声冲击处理(UIT)是一种有效的焊后改善焊接接头疲劳性能的工艺措施,其借助机械撞击和超声振动的共同作用,使焊趾表面产生塑性变形从而引入有益的压缩残余应力。为评价UIT技术对焊接接头残余应力的影响,该文提出了一套新的数值分析方法,包括焊接数值模拟及随后的超声冲击处理过程的动态弹塑性有限元分析。在有限元模型中考虑了实际的工艺参数和超声促成的材料软化效应。以船用高强钢AH36非承载十字焊接接头为研究对象,将预测的超声冲击处理前后的残余应力分布与实验结果进行对比,两者有较好的吻合。在此基础上,探讨了静态预载荷对超声冲击处理态残余应力再分布的影响。     

水下无人作战系统装备现状及发展趋势

海军水下无人作战系统因其造价低廉、隐蔽性强、避免人员伤亡等诸多优点而得到大力发展,美国等国已制定各类水下无人作战系统发展规划并开发出便携型、轻型、重型和巨型等多种水下无人作战系统,并向着提高智能化、模块化和标准化程度、拓展多平台搭载使用能力等方向发展。为了应对威胁,我国也应从顶层规划水下无人作战体系发展路线,开发多样化的水下无人作战系统。     

营运船舶航行性能和海洋环境监测平台开发验证

EEDI是衡量船舶能效水平的重要指标.由于试验条件限制,目前主要还是依靠模型试验结果对交船测试进行修正换算得到.上海船舶运输科学研究所自主研发了航行性能和海洋环境监测平台,可对营运船舶开展长期跟踪监测,实时收集船舶营运阶段的航行环境和性能参数,通过自动识别航行状态,划分海区、海况和船舶载况等因素对于船舶功率与航速的影响,可获得营运船舶实际EEDI指标,提高EEDI实船验证结果的准确性.监测平台在某万箱级集装箱船进行相关验证,并已展开长期监测.     

The Bid-rent Land Use Model of the simple,efficient, elegant,and effective model of land use and transportation

Integrated land use/transportation forecasting models add significant policy and infrastructure alternatives analysis capabilities to the urban planning process. The financial, time, and staff requirements to develop these models has put them beyond the reach of most small to medium sized urban areas. This paper presents the land use allocation submodel of the Simple, Efficient, Elegant, and Effective model of land use and transportation (SE³M), an integrated land use and transportation forecasting model founded upon Economic Base Theory and Bid-rent Theory. The Bid-rent Land Use Model (BLUM) is an agent based, spatial competition model utilizing unique utility curves for willingness to pay and incomes for budget constrained abilities to pay for each agent. The model structure, estimation, calibration, implementation, and validation are presented. With a single year of land use data available, the validation approach used the Kappa Index of Agreement to spatially check model outputs against base year control data while controlling for agreement by chance. The U.S. territory of Guam is used as the case study/proof of concept implementation for this model framework. Once calibrated, BLUM could solve the spatial competition problem on Guam in less than two minutes of processing time with over 90% accuracy.     

Airline energy efficiency measures using the Virtual Frontier Network RAM with weak disposability

In this paper, airline energy efficiency is divided into three stages: the operations stage, the services stage and the sales stage. Greenhouse gas emissions are treated as an undesirable output of the services stage. This new three-stage strategic operating framework is a modification of existing models. A new model, Virtual Frontier Network Range Adjusted Measure with weak disposability, is proposed to evaluate the efficiencies of 22 international airlines, from 2008 to 2012. The results show that the new model can establish more reasonable rankings and confirm new benchmarking airlines and that inclusion in the European Union’s Emissions Trading Scheme has had little influence on the improvement of airline energy efficiency.     

Direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem

This paper proposes simple and direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem. It is only necessary to account for random variables independent of link flows by performing a simple transformation of the perceived link travel time with a normal distribution. At every iteration of a Monte-Carlo simulation procedure, the values of the random variables are sampled based on their probability distributions, and then a regular deterministic user equilibrium assignment is carried out to produce link flows. The link flows produced at each iteration of the Monte-Carlo simulation are averaged to yield the final flow pattern. Two test networks demonstrate that the proposed algorithms and the traditional algorithm (the Method of Successive Averages) produce similar results and that the proposed algorithms can be extended to the computation of the case in which the random error term depends on measured travel time.