铁路隧道下穿既有公路地层变形特性研究

文章结合张唐铁路工程燕山隧道下穿公路出口段,采用三维有限差分程序,研究分析了其施工过程中的地层变形特性、力学响应、能量积聚及塑性区分布特征.研究结果表明:公路最大沉降量小于规范要求,围岩竖向最大变形为20 mm,水平变形为16 mm;掌子面前方挤出变形明显,最大值为38 mm;边墙能量密度集中现象较显著,位于距洞壁5 m深部围岩处;掌子面前方6 m左右围岩处出现能量积聚,为掌子面稳定关键部位:塑性区主要集中在掌子面前方、拱肩、边墙及墙脚.为此,建议对掌子面进行预加固,保证墙脚和拱肩部位配筋,提高结构整体稳定性.     

A field evaluation case study of the environmental and energy impacts of traffic calming

This study quantifies the energy and environmental impact of a selection of traffic calming measures using a combination of second-by-second floating-car global positioning system data and microscopic energy and emission models. It finds that traffic calming may result in negative impacts on vehicle fuel consumption and emission rates if drivers exert aggressive acceleration levels to speed up to their journeys. Consequently by eliminating sharp acceleration maneuvers significant savings in vehicle fuel consumption and emission rates are achievable through driver education. The study also demonstrates that high emitting vehicles produce CO emissions that are up to 25 times higher than normal vehicle emission levels while low emitting vehicles produce emissions that are 15–35% of normal vehicles. The relative increases in vehicle fuel consumption and emission levels associated with the sample traffic calming measures are consistent and similar for normal, low, and high emitting vehicles.     

浅谈筑路机械设备管理

文章通过分析筑路机械设备管理的背景和意义,针对目前筑路机械设备管理存在的问题,提出了相关对策,为公路施工企业提高筑路机械设备管理水平提供借鉴。     

广西运政管理信息化建设研究

文章结合对运政管理信息化现状的分析,介绍了广西运政管理信息化建设的系统规划及特点,提出了建设的难点问题,并对广西运政管理信息化建设所取得的效益进行了评述。     

高校建筑招投标管理审计的思考

在实际招投标管理审计工作中,通过收集、整理、分析、归纳,提出如何加强招投标管理机构、制度建设、招标文件、评标方法及合同审计等几点建议,探讨加强招投标管理审计工作的途径.     

汽车轻量化开展流程及方法研究

虽然国内汽车轻量化技术有了较快的发展,但在系统性开展轻量化工作的流程和方法上依然在摸索中前进.本文通过研究国内外轻量化开展现状,初步搭建了整车轻量化开展流程,制定出一套完整的重量管控流程,尝试提出了整车轻量化新的评价方法,努力推动建立一套规范的、切实可行的轻量化工作流程体系,以促进汽车主机厂降重节能减排的顺利实施以及轻...     

Energy-aware control for automated container terminals using integrated flow shop scheduling and optimal control

The performance of container terminals needs to be improved to handle the growth of transported containers and maintain port sustainability. This paper provides a methodology for improving the handling capacity of an automated container terminal in an energy-efficient way. The behavior of a container terminal is considered as consisting of a higher level and a lower level represented by discrete-event dynamics and continuous-time dynamics, respectively. These dynamics represent the behavior of a large number of terminal equipment. The dynamics need to be controlled. For controlling the higher level dynamics, a minimal makespan problem is solved. For this, the minimal time required by equipment for performing an operation at the lower level is needed. The minimal time for performing an operation at the lower level is obtained using Pontryagin’s Minimum Principle. The actual operation time allowed by the higher level for processing an operation at the lower level is subsequently determined by a scheduling algorithm at the higher level. Given an actual operation time, the lower level dynamics are controlled using optimal control to achieve minimal energy consumption while respecting the time constraint. Simulation studies illustrate how energy-efficient management of equipment for the minimal makespan could be obtained using the proposed methodology.     

An analysis of trends in passenger and freight transport energy consumption in India

This primary objective of this paper is to examine the causes for the change in energy consumption in the transport sector in India. The pattern of energy consumption and their causes for change are benchmarked against select countries. A mathematical model that decomposes changes in energy consumption to various factors has been used. The changes in the energy consumption are attributed to growth in transport volume, structural change or modal shift, and energy intensity. The analysis is conducted for passenger and freight transport separately. Results indicate that the growth in transport volume has been the main cause for increase in energy consumption for both passenger and freight transport in India despite the decline in energy intensity of various transport modes. Though not surprising for a growing economy like India, this poses a challenge for the future. Currently, India is a low carbon economy.     

浅淡公路工程施工测量工作的管理措施

文章基于公路工程施工测量工作的重要性,阐述了公路工程施工测量的内容以及目前施工测量工作中存在的问题,提出了公路工程施工测量工作的管理措施和对测量技术人员的要求。     

基于USB接口的电力机车能耗记录与分析系统

以C8051F单片机作为中央处理器,采集电参数计量模块和TAX2型机车安全综合监测装置的信息,生成并存储电量消耗记录;通过USB盘转储数据到地面进行处理和分析。系统整体设计具有模块化、准确可靠的特点,对电力机车节能降耗措施提供合理的依据。