"大源湖"号油船尾管异常声响分析与对策

从“大源湖”号油船在满载航行时产生尾管异常声响现象,经研究和理论计算,查找出产生的原因,提出经济而简单的解决措施。由此对大型船舶提出一个共性问题,轴系校中应考虑船体变形的影响,防止事故发生。     

船体外板板缝排列的研究

从几个不同方面综述了船体外板板缝排列应遵循的原则,给出了排列板缝的一般方法和步骤,并对排列板缝过程中常见的几个相关问题及其处理方法进行了阐述。     

船体薄壁梁的二次剪流和二次扭矩

将船体作为阶梯薄壁梁,用薄壁梁的约束扭转理论进行扭转强度分析的方法,是目前国内外造船界普遍使用的方法。 本文讨论了翘曲约束引起的二次剪流的计算问题,提出了一个适于用电子计算机计算的规格化的方法,并简单介绍了依据此方法编制的计算程序。 本文还通过对二次剪流直接积分,证明了二次扭矩和双力矩之间的微分关系式在具有闭室的薄壁梁的情形下同样成立。     

应用空间有限元模型进行船舶总振动特性的研究

本文以17500吨货船“海建”号为实例研究应用空间有限元模型计算船舶总振动的方法。对于实际船舶结构中的板,提出用平面应力元简化,以减少计算自由度数,由此产生的问题采用节点主从关系的方法解决。在编制的计算程序中,根据质量矩阵高度稀疏的特点,采用了稀疏存储技术,从而使船舶整体空间模型的振动分析能在国产中小型机器上实现。实例计算结果和测量结果的比较表明,这种计算模型合理、可靠。本文还对船舶总振动计算的梁模型、平面有限元模型、空间有限元模型作了比较和讨论。     

船体结构总纵极限强度的简化逐步破坏分析方法

本文基于Smith方法,应用梁-柱理论、理想弹塑性假设、平截面假设和塑性铰理论建立了加筋板单元的应力-应变关系曲线,导出了船体结构总纵极限强度的简化逐步破坏分析方法并编制成FORTRAN计算程序.应用作者导出的简化逐步破坏分析方法分析计算了Reckling 23号模型总纵极限强度.计算结果表明,本文导出的简化逐步破坏分析方法和计算程序正确可靠,可供船体结构设计和使用.本文还对船体结构总纵极限强度的影响因素进行了分析,其中包括加筋板单元的载荷-缩短行为、横向压力、材料屈服强度和腐蚀等.     

加筋板的双重非线性分析

本文综合工程实际的需要,对船体加筋板结构进行了双重非线性有限元分析。采用Prandtl-Reuss流动理论,具体导出了加筋板在双重非线性状态下理想弹-塑性和强化材料的单元刚度矩阵;用增量切线刚度法-迭代法相结合的混合解法来提高求解精度;对单剛、等效节点力的计算,均采用Gauss积分法和进行分层精度判别来节约机时和内存。     

Development of a hull form definition tool with a related knowledge-based advisory system

The development of a parametric hull form design system utilizing combined knowledge-based and objectoriented methodologies, approaches, and techniques is the major purpose of this research. One objective was the development of a powerful, intuitive, and parameter-based hull definition system with a related hull definition advisory system that would provide useful and necessary advice to the user. Object and knowledge modeling activities were conducted during the analysis and design stage to facilitate the implementation of a hull design program and advisory system. The hull design system includes the generation of a geometric model from a process of aggregating simple user-selected shapes representing different boundaries. Design involves the capability to vary simple parameters such as entrance angles, length-breadth ratios, and radii to define local and general surface geometries. Hydrostatic calculations are included for analysis; results are referred to an advisory system for evaluation and the determination of the acceptability of parameters and analysis results. The advisory system includes a knowledge bases consisting of hull form databases, results of the statistical analysis of data, design parameter constraints, and expert knowledge acquired from designers, reference materials, and technical reports. Use of the design tool with the advisory system results in the rapid generation of hull forms and associated design evaluations. Flexibility in decision making results from the separation of the design system from the advisory system. The independence of the two systems allows for a wide range of user experience with experts using the design tool with minimal reference to the advisory system. On the other hand, the expertise and knowledge stored in the advisory system is fully available to inexperienced designers and users.     

船体破损后外载荷与船体极限弯矩

基于船舶不沉性理论，运用符拉索夫抗沉性计算法确定船舶破损后浮态参数之后，作出波浪上船舶破损浮力曲线，继而计算了波浪弯矩和波浪剪力；并用非对称梁弯曲理论建立了破损模型，将外载荷与破口联系在一起研究了破损船舶极限弯矩，通过实例计算得出了预想结果。     

Studies on the optimization of stern hull form based on a potential flow solver

A hypothesis of the minimum energy of secondary flow, suggested by Bessho, is introduced here. According to this hypothesis, it can be expected that hull forms having frame lines with a minimum energy of secondary flow show less form drag. In the first part of this article, secondary flow energy is evaluated for the cases with and without a free-surface effect, and Bessho’s hypothesis is confirmed for practical hull forms. Then optimization methods for the stern hull form are suggested, in which a nonlinear optimization technique is introduced. Numerical examples are given for a practical tanker hull form and a practical container hull form. From these studies, the suggested optimization method can be confirmed as a simplified and practical design method to the select frame lines of stern hull forms.     

FPSO-STP中深水单点系泊系统

结合"南海奋进"和"海洋石油111"FPSO单点系泊系统(STP-Submerge Turret Production)在中国中深海油田开发中的应用实例,探讨了该类单点系泊系统(STP)在设计、建造及海上安装方面应注意的问题.并针对这两艘FPSO单点系泊系统在投入使用后所出现的问题进行了分析.对未来该类单点系泊(STP)的设计、建造和海上安装提出了建议.阐明了该类单点系泊系统(STP)在中国海域的应用前景.