一种基于改进的减缩模型修正方法

提出一种改进的模型修正方法,该方法采用多目标优化技术使得结构的减缩模型与实测结果相吻合。即首先建立一个多目标优化模型,其中包括一个关于单元修正系数的隐式非线性特征方程组,然后通过遗传算法来求解该多目标优化问题,来同时实现模型修正和损伤检测。文中通过对一个悬臂梁的数值仿真,表明本文所提出的方法的有效性,即在较大的测量噪声的情况下,同时具有模型修正和损伤检测两种功能,且较改进前的基于迭代的方法具有更好的噪声鲁棒性。     

既有铁路桥墩健全度评估和试验方法研究

铁路桥梁检定部门主要依据《铁路桥梁检定规范》对铁路桥墩进行状态评估。由于桥墩在列车激励下的振幅随列车的种类、速度、轴重以及轨道不平顺状态的不同而变化,所以利用振幅指标难以定量判断桥墩的损伤。为此,通过理论分析、数值模拟计算、实验室试验和现场试验,对冲击振动试验法进行系统的研究,提出基于自振频率指标的桥墩健全度评估方法。主要研究内容如下。(1)从理论上给出推导冲击振动试验法的基本原理,编制冲击振动试验信号处理的计算机程序。(2)通过实验室试验和悬臂墩、简支梁、单墩桥梁体系、多墩多梁桥梁体系及空间桁梁模型等数…     

基于模态分析技术的大跨度斜拉桥主梁损伤识别

根据模态曲率的概念,构造结构损伤指标。采用有限元方法,对1座设定主梁不同位置发生损伤的大跨度预应力混凝土斜拉桥进行动力特性分析,利用构造的结构损伤指标对结构损伤进行识别研究。结果表明:结构损伤指标对结构损伤的识别精度与参与计算的模态振型及节点间距有关。应选择在损伤位置振幅较大的模态振型,而避免平衡位置处于损伤位置或附近的模态振型。该方法对结构的早期损伤可进行定性判断,结构损伤指标随结构的早期损伤程度的增大而增大,且增长幅度逐渐变小,当结构损伤达到一定程度后,损伤指标不再增大,而在渐近线附近波动。节点间距在一定范围内增大时,不影响损伤位置的识别,甚至可以确定损伤程度,但可能会反映不出损伤对其临近区域的影响;节点间距过大,可能发生漏判。     

一种基于数据挖掘的GIS及在航海中的应用

根据聚类分析方法中密度凝聚的思想，提出一种新的复合聚类分析算法，进一步将这种算法用于地理信息系统的数据挖掘，并应用于船舶航线的自动设计。     

隧道检测系统及其在韩国高速铁路隧道的应用

介绍韩国高速铁路隧道安装的健康监测系统,提出基于检测数据诊断隧道衬砌可能破损的新系统识别方法。引入逆算法,即根据已知的形变数据和混凝土衬砌恒载,估计破损的程度和位置。对以刚度均减和裂缝概念为基础建立的两种模型进行效果和优劣比较。对理想化的隧道结构进行数学分析,并用检测数据中常用的白噪声对模型进行适应性研究。结果表明,基于刚度均减方法的模型1对白噪声相对不敏感,而以裂缝概念为基础的模型2由于受刚度减小的影响很小,易于现场应用。     

A probabilistic damage tolerance concept for welded joints Part 2: a supplement to the rule based S–N approach

The first part of this paper presented the required statistics and stochastic models for reliability analysis of the fatigue fracture of welded plate joints. This present Part 2 suggests a probabilistic damage tolerance supplement to the design S–N curves for welded joints. The goal is to provide the practising engineer with simple tools that predict the reliability against fatigue fracture during service life. The impact of the chosen fatigue design factors (FDF) and the uncertainty in the applied stresses is revealed. The effect of an in-service inspection programme is also predicted. The results are presented as dimensionless matrices and suggested for use in support of decision-making at the design stage, without any advanced fracture mechanics modelling and stochastic simulation. One important advantage of this format is that the probability levels are presented regardless of actual weld class and target service life (TSL). This is obtained by introducing the FDF as a key parameter to the results. This parameter is defined as the ratio of predicted fatigue life over TSL. FDF is always calculated in the S–N approach which is mandatory in fatigue life prediction. Various welded details (classes) will have the same reliability level for the same FDF. This is true at the end of TSL and at earlier stages, i.e. fractions of TSL. The absolute value of TSL is immaterial for a given FDF. In the case of in-service inspection, the inspection interval is also given without dimensions as a fraction of TSL.

Only the influence of future scheduled inspections is treated. Updating based on actual inspection results is not included as the scope of work is inspection planning at the design stage. Results for some frequent cases occurring in practice are readily derived and presented.     

Fatigue design for plug/ring type gas welded joints of sts301l including welding residual stresses

This paper presents a fatigue design method for plug and ring type gas welded joints, which incorporates welding residual stress effects. A non-linear finite element analysis (FEA) was first performed to simulate the gas welding process. The numerically predicted residual stresses of the gas welds were then compared to experimental results measured using a hole drilling method. In order to evaluate the fatigue strength of the plug and ring type gas welded joints, a stress amplitude (σ _a ) _R taling the welding residual stress of the gas weld into account was introduced and is based on a modified Goodman equation incorporating the effect of the residual stress. Using the stress amplitude (σ _a ) _R , the ΔP-N _f relations obtained from fatigue tests for plug and ring type gas welded joints having various dimensions and shapes were systematically rearranged into (σ _a ) _R -N _f relations. It was found that the proposed stress amplitude (σ _a ) _R could provide a systematic and reasonable fatigue design criterion for the plug and ring type gas welded joints.     

Prediction of fatigue life and estimation of its reliability on the parts of an air suspension system

Air suspension systems have been implemented in various commercial vehicles, such as buses and special purpose trucks, because of the comfortable ride and easy height control. An evaluation of the durability of vehicle parts has been required for service life and safety starting in the early stages of design. The cyclic load applied to the vehicle can cause fatigue failure of parts, such as the suspension frame. This paper presents a method to predict the fatigue life of the suspension frame at the design stage of the air suspension system used in a heavy-duty vehicle. To estimate the fatigue life using the SN method, the Dynamic Stress Time History (DSTH) is necessary for the part of interest. DSTH can be obtained from the results of the flexible body dynamic analysis using the Belgian road simulation and the Modal Stress Recovery (MSR) method. Furthermore, the reliability of the predicted fatigue life can be evaluated by considering the variations in material properties. The probability and distribution of the expected life cycle can be obtained using experimental design with a minimum number of simulations. The advantage of using statistical methods to evaluate the life cycle is the ability to predict replacement time and the probability of failure of mass-produced parts. This paper proposes a rapid and simple method that can be effectively applied to the design of vehicle parts.     

基于余度概念的受损船体总纵剩余强度预报

基于作者提出的结构余度概率衡准，并通过对船体构件损伤模型与船体总纵强度可靠性计算模型的讨论，本文建立了一个合理而筒便的受损船体总纵剩余强度预报方法。     

40 Cr钢和50车轴钢超高周疲劳性能研究及疲劳断裂机理探讨

在对称拉压超声疲劳试验装置基础上,开发研制非对称拉压超声疲劳试验装置和三点弯曲超声疲劳试验装置。采用超声疲劳试验方法,结合扫描电镜断口微观分析,对40 Cr钢和50车轴钢光滑试样和缺口试样,在超高周疲劳范围内的疲劳性能和疲劳断裂机制进行研究,主要研究成果如下。对40 Cr