热前加工齿轮参数的修正

针对汽车传动器齿轮热处理后会发生变形，造成齿轮的齿形、齿向和跨棒距等误差的问题，分析了影响齿轮变形的因素，通过热处理变形试验对齿轮热处理前、后的参数进行测量，并对不合格参数加以修正。     

国外热处理多用炉简介

通过对国内十多个使用热处理炉的用户的调研和资料分析，从技术和经济角度，论述了奥地利AICHELIN箱式多用炉、IPSEN密封式淬火炉、美国SURFACE公司的ALLCASE多用箱式炉、日本UNICASE滴注式气体渗碳炉等热处理炉的使用情况、特点及存在问题，并对其进行了评价与分析。     

奥迪轿车用吸声隔热内饰制品的研制

在完成吸声隔热衬垫材料配方设计后，用不织布采用气流成网固化工艺制成符合德国奥迪轿车供货标准的吸声衬垫，同时研制成了获德方认可的奥迪轿车“隔音垫总成－门护板”。     

现浇连续箱梁冬季施工方案

介绍沈大高速公路后盐立交桥现浇连续箱梁冬季0℃以下的施工工艺,以达到抢工期、保质量的施工目的。可供同类工程、同类施工环境作参考。     

双层组合外套液压联轴器分析

介绍船用轴系液压联轴器的组成，并对液压联轴器双层外套进行了分析，确定了双层外套内、外层之间界面的最佳半径。     

Computer Modeling: an Important Tool in Materials Processing

IntroductionComPlltermodelinghasenjoyedgrowingaccePtanceinindustryandacademiaasamethodofchoiceforcharaCterzingmaterialsProcessingoperationswiththedriofattainingtargotend-designsinteffosofmetricssuchasPropenies,geometw,integrityandqualityassessment.Melting,cashng,machining,joiningandheattreatmcntaresomeexamPlesofcommonmatorialsProcesses.MaterialsProcessesbytheirnaturehaveseveralinherntpthelsthatneedtobeoveromeinorderthatthedesiredProductswillmeetthetargetspecilications.SuchpitfalsrePresentb…     

浅谈顶管施工工艺

顶管施工技术近年来在我国发展迅猛。顶管施工采用油压驱动,施工时噪音远远小于开槽式敷设管道,几乎没有地面沉降的现象;将作业面移人地下,从而避免了对地面交通的影响;而且在较深的埋深情况下施工成本要小于开槽式敷设管道。该文结合九江市龙开隧道整治工程施工实际情况,对顶管施工工艺以及在污水处理工程中的应用作了简要阐述。     

Pressure drop and heat transfer of catalyzed diesel particulate filters due to changes in soot loading and flow rate

When soot particles are loaded in a diesel particulate filter, it causes increase in back pressure of the exhaust system. To minimize this pressure drop due to DPF, the filter needs to be regenerated after a certain amount of soot has been accumulated. It is crucial to estimate the correct amount of soot that has been accumulated by measuring the differential pressure. It is also important to understand changes in pressure drop due to flow rate variations of the exhaust gas, since the pressure drop would be influenced by the exhaust flow rate as well as the amount of soot. Furthermore, the heat transfer characteristics of the catalyzed diesel particulate filter (CDPF) are another major issue, as the filter is occasionally exposed to high temperature gas. This study presents the characteristics of pressure drop according to the variation of soot loading and the mass flow rate in CDPF. In addition, heat transfer characteristics in the filter was investigated when a high temperature gas flows into the CDPF. Tests were performed in several CDPF samples having varying amounts of catalyst coating. Experimental results indicate that rig-based experiments are useful in understanding the characteristics of pressure drop in the CDPF. In the cake filtration region, a pressure drop has a proportional relationship according to soot loading and mass flow rate. It was found that an increased catalyst coating may lead to enhanced convective heat transfer.     

驱动吹沙水泵柴油机气缸套裂纹损伤原因分析

本文以驱动吹沙泵柴油机冬季出现气缸套裂纹损伤的实例,分析这类型工程机械的运行特性以及产生裂纹的原因,并提出预防的措施。     

舰用汽轮机高压转子换热边界条件的确定

该文依据某汽轮机高压缸设计参数作变工况计算,获得各种转速下转子各部位的蒸汽参数,并由此得到各部位的换热系数,所得结果可用于转子的动态温度场和应力场计算以及疲劳寿命预测。