宽带网络优化

稳定的网络是运营商服务用户的基础,也是获得用户认可的前提。在用户不断增加的前提下,根据公司现有资源情况,利用合理的投资计划,完善管内互联网接入层、汇聚层的调整优化,实现网络带宽的冗余和提高网络的抗干扰能力。     

铁路站场最优进路研究

本文介绍了计算机联锁进路搜索的现状以及基于图论理论建立的铁路站场控制的图模型，阐述了通过最短路原理实现的铁路站场最优进路控制的方法。     

船舶结构混合变量优化的遗传算法

本文针对船舶结构优化设计中普遍存在的混合离散变量现象，对遗传算法进行了若干探讨和改进，以直接获得实用的最优解。通过两个船舶结构优化的算例，验证了本文方法的有效性。     

基于粒子群算法的动力定位推力分配决策变量优选

针对群智能算法解决动力定位推力分配问题易陷入局部最优、计算时间长等不足,基于粒子群算法探索不同粒子决策变量对推力分配结果的影响。首先考虑推力分配目标力和力矩、推力限制、禁止角等约束条件,以推进器功率最优、磨损最小为优化目标建立了推力分配数学模型,构建了基于三种不同粒子决策变量的粒子群推力分配算法;其次以算法结果的适应度值、计算消耗时间的均值和方差量化算法的收敛性和实时性,对上述三种方法进行了仿真分析,仿真结果对比表明,基于本文提出的粒子决策变量搜索在收敛性和实时性上均达到最优,对粒子群算法解决推力分配问题有一定的参考价值。     

基于IWO算法的轴系—基座—壳体系统声辐射优化研究

针对轴系-基座-壳体结构复杂,对于激振力引起的结构表面声辐射尚未形成一套有效的计算和优化方法,文章尝试通过功率流有限元和声学边界元方法,对系统声优化问题进行了研究。在直线校中状态下,用相应单元模拟系统中减振器、隔振器和吸振器,建立轴系-基座-壳体系统有限元模型,利用有限元转子动力学,计算系统某特定工况下频率响应。在此基础上采用IWO算法,以各减振单元参数为设计变量,以传递路径的总功率流为目标函数进行优化,最后利用声学边界元方法对优化结果进行对比分析。结果表明,将流经路径总功率流替代场点声压为目标函数,不仅能将问题简化大大减少计算量,还能为系统减振降噪提供有效的优化计算方法,具有重要工程应用价值。     

Dynamic response of the non-contact underwater explosions on naval equipment

Shock resistance capacity of the shipboard equipment especially for large ones, has been a strong concern of navies all over the world for a long time. The shipboard equipment have previously generally been studied separate from hull structure before. In this paper the coupling elastic effect between equipment and hull structure is taken into account. With the ABAQUS software, the integrated model of the equipment coupled with the hull structure is established to study the dynamic response of the shipboard equipment to the shock wave load as well as the bubble pulsation load. In order to verify the numerical method, the simulated results are compared to the experimental data, which are from a specific underwater explosion on an actual ship. On this basis, by changing the charge location, attack angle, equipment installation location and other parameters, the characteristics of dynamic response under different conditions can be obtained. In addition, the results of the integrated calculation and the non-integrated one are compared and the characteristic parameters which affect the equipment shock response are analyzed. Some curves and conclusions are obtained for engineering applications, which provides some insights into the shock resistance of shipboard equipment.     

船体污损及处理方法

介绍船体污损的形成及不良影响,综述了防止和处理船体污损的常用方法及技术进展.     

Intermodal Transit System Coordination

In urban areas where transit demand is widely spread, passengers may be served by an intermodal transit system, consisting of a rail transit line (or a bus rapid transit route) and a number of feeder routes connecting at different transfer stations. In such a system, passengers may need one or more transfers to complete their journey. Therefore, scheduling vehicles operating in the system with special attention to reduce transfer time can contribute significantly to service quality improvements. Schedule synchronization may significantly reduce transfer delays at transfer stations where various routes interconnect. Since vehicle arrivals are stochastic, slack time allowances in vehicle schedules may be desirable to reduce the probability of missed connections. An objective total cost function, including supplier and user costs, is formulated for optimizing the coordination of a general intermodal transit network. A four-stage procedure is developed for determining the optimal coordination status among routes at every transfer station. Considering stochastic feeder vehicle arrivals at transfer stations, the slack times of coordinated routes are optimized, by balancing the savings from transfer delays and additional cost from slack delays and operating costs. The model thus developed is used to optimize the coordination of an intermodal transit network, while the impact of a range of factors on coordination (e.g., demand, standard deviation of vehicle arrival times, etc) is examined.     

Mathematical properties and constraints representation for bottom-up approaches to the evaluation of GHG mitigation policies

Bottom-up models, including MARKAL, MESSAGE and AIM, are widely used when analyzing the effect of greenhouse gas (GHG) abatement policies. These bottom-up models are mostly formulated as a linear programming (LP) optimization model to find both the minimal cost combination of abatement technologies and energy flows while satisfying demands. It is not unusual that the bottom-up modeling involves a great number of technical, industrial, socioeconomic and environmental constraints. Investigating representative constraints needed for analyzing GHG abatement policies, this study proposes how to implement these constraints in bottom-up modeling.     

用模糊逻辑实现动力定位船舶的艏向寻优

由于各种环境因素随时间不断变化，船舶作为动力定位作业时，最优艏向也是不断变化的，所以艏向寻优是动力定位的关键技术之一，本文用模糊逻辑实现艏向寻优，其优点是，不依赖于环境要素的测量值和数学模型，寻优与控制相结合，反应快，准确程度高。