Mechanical Analysis of the Down-Hole String in a Deep Well

In a deep well, under high pressure and temperature, the force, deformation, and movement of the downhole string are very complicated. In this paper, based on the analysis of the working environment and load properties of the down-hole string in deep wells, the factors of high temperature, high pressure, and the complex structure of wells have been taken into consideration. The loads of the down-hole string, stability, back buckle configuration, dynamic characteristics, mechanical strength, and deformation have been systematically studied. On this basis, mechanical models of a down-hole string under different conditions have been established and software for aiding analysis has been developed. By using this software, deep well strings under different construction parameters can be simulated and analyzed, providing a theoretical basis and method for down-hole string assembly, as well as string down-hole construction and operation.     

Application of Epistemic Utility Theory to Satisfactory Optimization

Satisficing control remains an important concept in decision making. In this paper, a new epistemic utility satisficing control theory is proposed for a new model of complex CMMO (constrained multi-objective multi degree-of-freedom optimization) system. As well, an epistemic utility function is developed and used to adjust the feasible region of soft constraints. The theory proved in this paper indicates that the utility function not only expresses the subjectivity of the original satisfactory-degree function, but also takes the cost of searching for a solution into account. Thus, the satisfactory-degree function can be adjusted and its rationality can be validated. This theory contributes an analytical method to the inverse satisfactory optimization problem. The findings indicate that this theory has good convergence and outcomes desired for satisfactory-degree functions.     

道路网形态与公交线网关系的研究

论文在对城市道路网形态论述的基础上,以国内牡丹江、常州、扬州、德州四个城市的城市道路网与公交线网的关系为例,对公共交通的线网形态受到城市道路网形态的影响和制约进行了较为详细的论述,最后对道路网布线方法与道路网形态适应性进行了研究,并提出了研究展望,以期对国内公交线路规划起到一定的促进作用。     

《船体生产设计》课程创新性实训教学的探索

实践教学的主要目的和任务是培养学生的技术应用能力,使他们掌握职业岗位所必需的职业行动能力。本文对船舶工程技术专业的创新性实训教学的实施进行了介绍。     

Design of conformal cooling channels for an automotive part

The cooling system plays a crucial role in determining the productivity and quality of an injection molding process. With the current growth of Solid Freeform Fabrication (SFF) techniques, mold designers have been striving for not only improvement in cooling system performance but also for a method to do so automatically. In this paper, a method is proposed for developing a conformal cooling system that facilitates uniform cooling over the entire mold surface with minimum cycle time. Based on the temperature distribution after the filling stage, the mold surface is split into zones which will be cooled by optimized subconformal channels obtained from the optimization process. The optimization process in which the objective function is stated as minimization of the cooling time with boundaries ensuring a realistic design will optimize the cooling system layout in terms of cooling channel size and location. Finally, all subcooling channels are combined to generate the entire conformal cooling system for the injection mold.     

Parallel Distributed Implementation of Truss Optimization on a Local Area Network

A two-level optimization method for the design of complex truss and parallel distributed implementation on a LAN is presented using parallel virtual machine (PVM) for Win 32 as message passing between PCs. The volumes of truss are minimized by decomposing the original optimization problem into a number of bar optimization problems executed concurrently and a coordinate optimization problem, subject to constraints on nodal displacements, and stresses, buckling and crippling of bars, etc. The system sensitivity analysis that derives the partial derivatives of displacements and stresses with respect to areas are also performed in parallel so as to shorten the analysis time. The convergence and the speedup performances as well as parallel computing efficiency of the method are investigated by the optimization examples of a 52-bar planar truss and a 3 126-bar three-diraensional truss. The results show that the ideal speedup is obtained in the cases of 2 PCs for the 3 126-bar space truss optimization, while no speedup is observed for the 52-bar truss. It is concluded that (1) the parallel distributed algorithm proposed is efficient on the PC-based LAN for the coarsegrained large optimization problem; (2) to get a high speedup, the problem granularity should match with the network granularity;and (3) the larger the problem size is, the higher the parallel efficiency is.     

汽车覆盖件冲压方向优化系统设计

通过分析影响汽车覆盖件冲压方向选择的因素,建立了以评价函数法为基础的冲压方向优化模型。利用该模型对冲压件截面形状进行了分析,确定了截面转角的公共可行域,并建立了一组目标函数作为优化对象。在公共可行域内优化各个截面的转角,然后加权平均可得到目标函数的最优值。以典型汽车覆盖件为例,对实现覆盖件冲压方向的优化系统进行了理论验证。     

汽车侧面碰撞乘员约束系统的多目标优化

针对某轿车建立了基于多刚体理论的侧面碰撞乘员约束系统动态仿真模型,并依据试验结果进行了模型的有效性验证。通过对乘员侧面碰撞伤害指标的分析,提出了包含乘员多输出目标值的综合伤害评估值,并应用试验设计方法,以所提出的综合伤害评估值为目标进行了该车的侧面碰撞乘员约束系统多参数优化,给出了符合实际的优化结果。     

发动机-悬置系统的能量法解耦及优化设计

本文通过发动机-悬置系统的能量分布得到系统解耦的能量指标,并以该能量指标为优化设计目标。以系统的固有频率为约束条件,应用DSFD算法对系统进行优化计算。所编制的优化设计程序具有计算可靠、收敛速度快的特点。为便于程序应用,本文指出了系统能量解耦目标、频率约束及设计变量等因素对优化计算的影响。对某一轻型货车发动机-悬置系统的优化计算表明,仅通过悬置刚度参数的调整即可使系统的解耦水平明显提高。     

Hydrogen refueling station networks for heavy-duty vehicles in future power systems

A potential solution to reduce greenhouse gas (GHG) emissions in the transport sector is to use alternatively fueled vehicles (AFV). Heavy-duty vehicles (HDV) emit a large share of GHG emissions in the transport sector and are therefore the subject of growing attention from global regulators. Fuel cell and green hydrogen technologies are a promising option to decarbonize HDVs, as their fast refueling and long vehicle ranges are consistent with current logistic operational requirements. Moreover, the application of green hydrogen in transport could enable more effective integration of renewable energies (RE) across different energy sectors. This paper explores the interplay between HDV Hydrogen Refueling Stations (HRS) that produce hydrogen locally and the power system by combining an infrastructure location planning model and an electricity system optimization model that takes grid expansion options into account. Two scenarios – one sizing refueling stations to support the power system and one sizing them independently of it – are assessed regarding their impacts on the total annual electricity system costs, regional RE integration and the levelized cost of hydrogen (LCOH). The impacts are calculated based on locational marginal pricing for 2050. Depending on the integration scenario, we find average LCOH of between 4.83 euro/kg and 5.36 euro/kg, for which nodal electricity prices are the main determining factor as well as a strong difference in LCOH between north and south Germany. Adding HDV-HRS incurs power transmission expansion as well as higher power supply costs as the total power demand increases. From a system perspective, investing in HDV-HRS in symbiosis with the power system rather than independently promises cost savings of around seven billion euros per annum. We therefore conclude that the co-optimization of multiple energy sectors is important for investment planning and has the potential to exploit synergies.