基于键合图的车用蓄电池建模与仿真

按照键合图的规则,分别建立了蓄电池等效电路的键合图模型和冷却系统的键合图模型,然后将电系统和热系统耦合在一起,实现了蓄电池系统的键合图模型,最后建立了蓄电池的数学模型和仿真模型,并实现了动态仿真。     

轿车三维分离流动特性的研究

本文介绍了使用激光片光技术及激光多普勒测速仪对某型国产轿车尾流的三维分离流的尾迹和速度分布测定的试验研究。本项研究表明，光学流态显示和数字图象技术相结合，可以有效地揭示汽车的尾流结构，诊断阻力来源，本项研究为建立汽车三维分离流动的动态仿真理论模型提供了依据。     

关于一、三级公路安全性认知因素的试验建模研究

在实测86处一级公路典型路段和188处三级公路典型路段道路结构基础上,确定驾驶员对国道一、三级公路的安全性认知因素集,进而针对一级公路的38处样本路段和三级公路的77处样本路段,组织47名驾驶人员进行现场认知评价试验,并应用模糊集合原理和模糊统计方法对评价试验得到的2829组(一级路673组、三级路2156组)有效认知试验评语数据进行分析处理,得到一、三级公路安全性认知因素的模糊评价隶属函数,从而给出驾驶人员对一、三级公路道路条件和交通环境的安全性模糊评价模型。     

基于自适应遗传算法的路堤边坡稳定性分析方法

基于圆弧滑动面假定,提出了一种用自适应遗传算法搜索最危险滑动面及其对应的最小安全系数的新方法。该方法是一种改进的遗传算法,采用自适应求取适值、动态调整交叉率和变异率、自适应区间收缩。自适应遗传算法有效克服了传统方法易陷入局部极小的缺陷,提高了算法的搜索效率、精度和稳定性。     

山区公路层间滑移破坏机理分析及对策研究

通过现场调查,初步分析了山区公路沥青路面基面层滑移的主要原因。应用有限元法,对基层和面层之间的剪应力进行计算分析,得出了基面层间剪应力变化的一般规律,认为层间最大剪应力主要取决于面层厚度和荷载条件。在前述计算分析的基础上,利用自行研制的DLG A路面材料剪切仪进行了大量的层间滑移室内模拟试验,考察了不同的层间处理措施、温度、基层类型等因素对层间抗剪能力的影响,提出了防止基面层滑移的技术措施。     

Predicting the adoption of connected autonomous vehicles: A new approach based on the theory of diffusion of innovations

On the grounds that individuals heavily rely on the information that they receive from their peers when evaluating adoption of a radical innovation, this paper proposes a new approach to forecast long-term adoption of connected autonomous vehicles (CAVs). The concept of resistance is employed to explain why individuals typically tend to defer the adoption of an innovation. We assume that there exists a social network among individuals through which they communicate based on certain frequencies. In addition, individuals can be subject to media advertisement based on certain frequencies. An individual’s perceptions are dynamic and change over time as the individual is exposed to advertisement and communicates with satisfied and dissatisfied adopters. We also explicitly allow willingness-to-pay (WTP) to change as a result of peer-to-peer communication. An individual decides to adopt when (i) there is a need for a new vehicles; (ii) his/her WTP is greater than CAV price; and (iii) his/her overall impression about CAVs reaches a cutoff value. Applicability of the proposed approach is shown using a survey of employees of the University of Memphis. Our results show that the automobile fleet will be near homogenous in about 2050 only if CAV prices decrease at an annual rate of 15% or 20%. We find that a 6-month pre-introduction marketing campaign may have no significant impact on adoption trend. Marketing is shown to ignite CAV diffusion but its effect is capped. CAV market share will be close to 100% only if all adopters are satisfied with their purchases; therefore, the probability that an individual becomes a satisfied adopter plays an important role in the trend of adoption. The effect of the latter probability is more pronounced as time goes by and is also more prominent when CAV price reduces at greater rates. Some caveats may be inserted when considering the study results as the findings are subject to sample bias and data limitations.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

桩基建模方法对自升式钻井平台动力响应的影响

随着海洋油气开采作业水深的不断增加,海洋平台固有频率随之降低,易与相同频率成分的波浪产生共振,因此对平台动力响应特性研究是非常有必要的,而桩基模型在平台动力响应分析中发挥着关键作用。以某400英尺自升式钻井平台研究对象,基于等效建模的思想,分别建立了固支桩基、铰接桩基、线性弹簧桩基及非线性弹簧桩基四种有限元模型,并对其进行静力分析、模态分析及瞬态动力学分析,通过对比得到的振动频率、动力放大因子及波流惯性力,得出弹簧桩基模型在平台动力响应分析中的有效性及合理性结论。     

Multi-criteria optimization of traffic signals: Mobility,safety, and environment

Two-dimensional multi-objective optimizations have been used for decades for the problems in traffic engineering although only few times so far in the optimization of signal timings. While the other engineering and science disciplines have utilized visualization of 3-dimensional Pareto fronts in the optimization studies, we have not seen many of those concepts applied to traffic signal optimization problems. To bridge the gap in the existing knowledge this study presents a methodology where 3-dimensional Pareto Fronts of signal timings, which are expressed through mobility, (surrogate) safety, and environmental factors, are optimized by use of an evolutionary algorithm. The study uses a segment of 5 signalized intersections in West Valley City, Utah, to test signal timings which provide a balance between mobility, safety and environment. In addition, a set of previous developed signal timing scenarios, including some of the Connected Vehicle technologies such as GLOSA, were conducted to evaluate the quality of the 3-dimensional Pareto front solutions. The results show success of 3-dimensinal Pareto fronts moving towards optimality. The resulting signal timing plans do not show large differences between themselves but all improve on the signal timings from the field, significantly. The commonly used optimization of standard single-objective functions shows robust solutions. The new set of Connected Vehicle technologies also shows promising benefits, especially in the area of reducing inter-vehicular friction. The resulting timing plans from two optimization sets (constrained and unconstrained) show that environmental and safe signal timings coincide but somewhat contradict mobility. Further research is needed to apply similar concepts on a variety of networks and traffic conditions before generalizing findings.     

车务可视化信息系统设计与实现

车务可视化信息系统通过三维模型及虚拟漫游的展现形式,将铁路运行及运营的动态信息进行集成和柔性展示,实现旅客服务信息及运输管理相关数据的整合,通过可视化的展现方式既方便旅客及管理人员,又充分展示铁路信息化建设的成果。