光学仪器法快速找寻轴系理论中心线的研究

舰船轴系装调过程中,理论中心线的确定方法有多种。本文采用光学仪器法快速找寻轴系理论中心线,理论支持性强,高效而独特,具有较强的实用性。     

土工格栅在治理沥青路面裂缝中的应用

裂缝是沥青路面常见病害。应用非织造土工织物——多功能双向土工格栅治理高等级公路沥青路面的裂缝,取得了良好的效果,并对土工格栅的应用进行了定量计算。     

石河道大桥桩基础施工

针对卵石地层桩基础成孔问题,根据石河道大桥实际施工实践介绍了应用冲击钻孔的方法加以解决的施工方法,并着重分析了该方法的工艺流程和内容,以及施工中的注意事项.     

黄土湿化特性的三轴试验研究

研究目的：本文旨在通过三轴试验，研究黄土湿化应力应变关系、强度特征及影响因素。 研究方法：通过等围压固结湿化试验和三轴剪切湿化试验进行研究。 研究结果：获得不同围压条件下固结湿化变形随时间变化规律，初始含水量、压实度的影响规律；获得不同应力水平下湿化应力应变关系、剪切湿化变形规律以及湿化对强度的影响等成果。 研究结论：（1）湿化变形受初始含水量及压实度的影响很大；（2）湿化条件与不浸水条件下，应力一应变关系均表现为应变硬化特性；（3）剪切湿化体积变形随应力水平的增加而减小，轴向变形随应力水平的增大而增大；在同一应力水平下，体积变形与轴向变形均随平均主应力的增大而减小；（4）湿化不仅降低了黄土的强度，也降低了黄土达到破坏时的应变。     

FRP正弦波形夹心桥面板的等效有限元模型

以FRP正弦波形夹心桥面板作为研究对象,得到等效正交各项异性实心板,通过理论分析和数值对比,证明了方法的可行性;采用该法对一实际的FRP正弦波形夹心板桥进行了模态分析。     

Determination of Critical Slip Surface of Soil Slope

A new complex method is presented considering not only the improvement upon the ＂bad ＂design point, but also the diversity of the newly generated complex, which is obtained by replacing the ＂bad ＂design point with the better design point located at the line between the ＂bad ＂design point and the ceotroid of the remaining design points of the old complex. The new complex method is applied to searching for the critical slip surface of two non-homogeneous soil slopes. The comparison of the results obtained by the new complex method with that by the basic complex method shows that the new complex method is much more likely to find the true critical surface for the randomly generated initial complex.     

基于ANN星识别算法的仿真平台

星敏感器是一种高精确度的姿态测量仪器，它通过对观测到的星点进行识别来计算姿态。为了能够较好地测试和验证星识别系统的性能，设计了一个基于ANN算法的星识别仿真平台。通过对该星识别仿真平台性能的测试，表明该仿真平台能够方便，实时地测试星识别算法的性能与正确性，因此说它是一种具有较好实用价值的星识别仿真平台。     

湿陷性黄土地基强夯和冲击压实技术经济分析

0引言湿陷性是指土在自重或附加应力与自重共同作用下受水浸湿后产生急剧而大量的下沉。国标中规定:当sδ≥0.015时,为湿陷性黄土。通常湿陷性黄土地基较多采用强夯法处理,其主要特点是适应性强,经济简便;而冲击压实技术是20世纪90年代从南非蓝派公司引进,具有减少工后沉降效果     

船体舷侧大面积换板应注意的几个问题

对于20年以上船龄的散货船,在船体舷侧板大面积割换前,应将货舱内影响纵横强度的项目结束,并调整压载后,方能开工。割换范围、分片划分、工艺步骤、焊接顺序应科学合理,利于预防和控制船体整体变形、局部外板变形、焊缝裂纹等,从而确保修船质量。     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)