微机及载波控制逆变CO_2焊机的应用前景

通过对载波控制技术在焊机上的应用的研究,集成微机控制技术、IGBT逆变焊机节能技术,研发新型高效节能的微机及载波控制逆变CO2焊机,其效率比传统的硅整流CO2焊机提高30%以上;比传统的IGBT逆变CO2焊机节电10%,效率达到95%.因此,它为耗能巨大的电焊作业提供了节能降耗重要途径.可见这种技术先进、功能强大、人机界面友好、性价比甚高的微机及载波控制的逆变CO2焊机必将成为船舶高效焊接重要的工艺装备.     

From Twitter to detector: Real-time traffic incident detection using social media data

The effectiveness of traditional incident detection is often limited by sparse sensor coverage, and reporting incidents to emergency response systems is labor-intensive. We propose to mine tweet texts to extract incident information on both highways and arterials as an efficient and cost-effective alternative to existing data sources. This paper presents a methodology to crawl, process and filter tweets that are accessible by the public for free. Tweets are acquired from Twitter using the REST API in real time. The process of adaptive data acquisition establishes a dictionary of important keywords and their combinations that can imply traffic incidents (TI). A tweet is then mapped into a high dimensional binary vector in a feature space formed by the dictionary, and classified into either TI related or not. All the TI tweets are then geocoded to determine their locations, and further classified into one of the five incident categories.We apply the methodology in two regions, the Pittsburgh and Philadelphia Metropolitan Areas. Overall, mining tweets holds great potentials to complement existing traffic incident data in a very cheap way. A small sample of tweets acquired from the Twitter API cover most of the incidents reported in the existing data set, and additional incidents can be identified through analyzing tweets text. Twitter also provides ample additional information with a reasonable coverage on arterials. A tweet that is related to TI and geocodable accounts for approximately 5% of all the acquired tweets. Of those geocodable TI tweets, 60–70% are posted by influential users (IU), namely public Twitter accounts mostly owned by public agencies and media, while the rest is contributed by individual users. There is more incident information provided by Twitter on weekends than on weekdays. Within the same day, both individuals and IUs tend to report incidents more frequently during the day time than at night, especially during traffic peak hours. Individual tweets are more likely to report incidents near the center of a city, and the volume of information significantly decays outwards from the center.     

Gas transfer velocities of CO2 and CH4 in a tropical reservoir and its river downstream

We have measured simultaneously the methane (CH₄) and carbon dioxide (CO₂) surface concentrations and water–air fluxes by floating chambers (FC) in the Petit-Saut Reservoir (French Guiana) and its tidal river (Sinnamary River) downstream of the dam, during the two field experiments in wet (May 2003) and dry season (December 2003). The eddy covariance (EC) technique was also used for CO₂ fluxes on the lake. The comparison of fluxes obtained by FC and EC showed little discrepancies mainly due to differences in measurements durations which resulted in different average wind speeds. When comparing the gas transfer velocity (k₆₀₀) for a given wind speed, both methods gave similar results. On the lake and excluding rainy events, we obtained an exponential relationship between k₆₀₀ and U₁₀, with a significant intercept at 1.7 cm h^− 1, probably due to thermal effects. Gas transfer velocity was also positively related to rainfall rates reaching 26.5 cm h⁻¹ for a rainfall rate of 36 mm h^− 1. During a 24-h experiment in dry season, rainfall accounted for as much as 25% of the k₆₀₀. In the river downstream of the dam, k₆₀₀ values were 3 to 4 times higher than on the lake, and followed a linear relationship with U₁₀.     

大口径特涂管高质量制造的生产工艺

在72 000 dwt成品油船货油管制造中,发生特涂管涂装层脱落的问题,本文就此进行了分析,并提出了解决措施。     

Comparison of HC species from diesel combustion modes and characterization of a heat-up doc formulation

This study summarizes engine speed and load effects on HC species emissions from premixed charge compression ignition (PCI) and conventional diesel combustion, and it evaluates diesel oxidation catalyst (DOC) formulations on a gas flow reactor for the purpose of diesel particulate filter regeneration or lean NO_x trap desulfation. HC emissions are sampled simultaneously by a Tedlar bag for light HC species and by a Tenax TA™ adsorption trap for semi-volatile HC species, and they are analyzed by gas chromatography with a flame ionization detector. The bulk temperature and residence time during combustion are key parameters that are important for understanding the effects of speed and load on engine-out HC emissions. The degree of post-flame oxidation is higher in PCI than in conventional combustion, and it is increased for PCI with a higher speed and load, as indicated by a lower fuel alkanes/THC ratio, a higher alkenes/fuel alkanes ratio, and a higher methane/THC ratio. Ethene and n-undecane are two representative HC species, and they are used as a surrogate mixture in the gas flow reactor to simulate PCI and conventional combustion with in-cylinder post fuel injection. Among the three DOC formulations tested, the catalyst with constituent precious metals of platinum and palladium (PtPd) showed the best light-off performance, followed by PtPd with an addition of cerium dioxide (PtPd+CeO₂), and platinum (Pt), regardless of exhaust compositions. Conventional combustion exhaust composition shows a lower light-off temperature than that of PCI, regardless of catalyst formulation.     

Automotive structure vibration with component mode synthesis on a multi-level

The recursive component mode synthesis method (RCMS) has been implemented for the finite element analysis model of an automobile structure as an efficient free vibration analysis tool. The RCMS method is intended to obtain a better performance relative to the block Lanczos method, which is a traditional method in the industry of obtaining eigenvalues, while obtaining the acceptable accuracy. A numerical example of the automobile finite element model demonstrates the outstanding performance of RCMS compared to the block Lanczos method.     

世界海上油船运输

首先简述世界经济形势，指出随着世界经济的良好发展，世界海上油运也将兴旺。介绍了目前世界海上油运船队的规模及其构成，最后介绍油船大型化的概况。     

三维编织复合材料板的自由振动

基于Reddy高阶剪切变形板理论,用双重Fourier级数法求得了四边简支的三维四向编织复合材料剪切板自由振动的解析解,并讨论了纤维的体积含量和编织角对剪切板固有频率的影响。     

燃气热泵的经济性分析

利用热经济学的研究方法对燃气热泵和其它几种常规空调方式的经济性进行了研究比较,并就能源价格变化对经济性的影响进行了研究,获得了适宜燃气热泵推广应用的能源价格范围。结果表明,燃气热泵的年度总成本最低,具有经济性优势。     

独立液货舱型式沥青运输船设计特点

阐述了独立液货舱型式沥青运输船在设计方面较常规船舶的特殊之处,主要表现在总体布置、结构布置、独立舱支承装置、独立舱定位装置、防浮装置、独立液货舱绝缘、结构防火与消防以及永久性检验通道等方面。