基于SolidWorks的AUV耐压舱体设计与校核

自主式水下航行器的耐压和密封是非常关键的两方面,基于SolidWorks软件对324型AUV耐压舱体进行了设计与仿真校核。综合考虑薄膜理论和不连续效应,根据NSGA-Ⅱ算法实现多目标优化,确定出直舱和封头的基本尺寸,利用美国海军试验水槽公式和稳定条件进行初步验证,以保证强度和稳定性。根据得出的几何尺寸在SolidWorks里完成三维建模,并在Simulation模块中完成数值模拟仿真,最终对舱体进行实际耐压试验,将结果和理论计算、软件仿真进行对比。针对直舱段舱体不同尺寸和材料进行了三维建模和数值仿真,得出相应结论。     

编队飞行中基于危险区域的后机最优位置研究

编队飞行是实现民航绿色发展的重要措施之一。在前机尾涡危险区域分析的基础上，科学确定后机最优位置是编队飞行的关键。首先，以随机两阶段尾涡消散模型为基础，利用Hallock-Burnham涡模型和诱导滚转力矩系数模型分析后机诱导滚转力矩系数的演变规律。然后，基于设定的安全阈值，给出前机尾涡危险区域，并考虑飞行高度、速度和风对危险区域的影响。最后，基于后机不同位置处的燃油流量减少率，得出编队飞行中后机最优位置。研究结果表明：后机诱导滚转力矩系数随着前、后机之间横向距离的增加，呈先增后减再增的趋势；随纵向距离的增加，呈先缓慢减小后快速减小的趋势；高度越高、速度越小，诱导滚转力矩系数的峰值越高。飞行高度越高、速度越小，前机初始尾涡的危险区域越大；随着纵向距离的增加，危险区域不断减小，并随涡核的下沉不断下降。侧风使危险区域发生偏离，侧风越大，偏离程度越大。顺风会增加危险区域的纵向距离，顶风则与之相反。两架B737-800飞机在12000 m高度以0.78马赫数进行编队飞行时，前、后机纵向距离3000m处，无风情况下后机最优位置为横向距离30 m 或-30 m、垂直距离29 m，此时燃油流量减少率为7.01%。相较于无风，左侧风20 m·s -1 下，燃油流量减少率和垂直距离不变，横向距离增加；顺风20 m·s -1 下，燃油流量减少率增加，横向距离不变，垂直距离减少；顶风20 m·s -1 下，燃油流量减少率减小，横向距离不变，垂直距离增加。     

Numerical simulation on truncated oval-nosed projectile penetrating into stiffened plate北大核心CSCD

[Objectives]In this paper, the numerical simulation method is used to study the anti-penetration performance and energy absorption mode of a stiffened plate, as well as the influence of different stiffened bars on the flight attitude of the projectile body.[Methods] Finite element software LS-DYNA is used to simulate the process of a truncated oval-nosed projectile penetrating a stiffened plate, and the results of the numerical simulation are compared with an experiment to verify the reliability of the numerical simulation method. The momentum method and mass equivalence method are used to predict the residual velocity of the projectile, and the applicability of different theoretical methods within different velocity ranges is compared. The deformation energy of different regions of the stiffened plate is then extracted to analyze the influence of the initial velocity of the projectile body on the energy absorption mode of the target plate. Finally, the structure of the stiffeners is changed and the influence of the relative position of the stiffeners on the penetration attitude of the projectile body is analyzed.[Results]The results show that the mass equivalence method is more accurate than the momentum method in predicting the residual velocity of the stiffened plate when the initial velocity of the projectile body is in the range of 300–900 m/s. The ratio of the deformation energy of the stiffened plate to the energy loss of the projectile body decreases with the increase of the initial velocity of the projectile body. The effect of a T-stiffened plate on trajectory is greater than that of a rectangular-stiffened plate.[Conclusions]The related calculation method and research results have certain reference value for research and engineering application surrounding the anti-penetration of stiffened plates. © 2023 Chinese Journal of Ship Research. All rights reserved.     

大跨度系杆拱桥主拱钢-混凝土结合段受力状态分析

以鹰潭市余信贵大跨度中承式钢管混凝土系杆拱桥为研究对象,利用有限元软件分别建立大桥整体数值模型与钢-混凝土结合段局部实体数值模型,计算分析主拱钢-混凝土结合段在设计荷载作用下的受力状态与承载能力。分析结果表明:在持久状况荷载组合下,主拱肋钢-混凝土结合段模型变形连续,最大变形量为0.030 m,主拱肋钢-混凝土结合段结构刚度及变形满足要求;钢-混凝土结合段混凝土最大拉应力为1.63 MPa,钢结构部分Von-Mises等效应力最大值为236 MPa,均小于容许应力,满足结构设计要求;为避免应力集中,须对钢-混凝土结合段的坡口进行细化设计,或调整主跨系杆的张拉力。     

基于延迟脱体涡算法高速列车通过隧道时的绕流特性

基于延迟脱体涡算法和滑移网格技术,建立CRH380A型列车的含有转向架的三维可压缩瞬态仿真模型,模拟研究高速列车气动力、速度场和表面压力这3大绕流特性的变化规律。结果表明:延迟脱体涡算法能较好地捕捉列车通过隧道时的气动特性;当列车头部刚驶入隧道时,气动阻力迅速升高并在车头完全进入隧道时达到最大值,列车下方2侧的速度纵向分量会急剧增加,位于靠近设备舱位置的速度纵向分量会显著降低;当尾车刚驶入隧道时,隧道内壁与列车侧面之间的流场会出现回流区;当尾车全部刚驶入隧道时,气动升力和侧向力骤然增加;当列车全部驶入隧道后,气动力的波动幅值均明显升高;列车通过隧道过程中,列车侧面压力整体上呈现先增后减、最后维持周期性波动的趋势,处于尾流区的车尾部位具有更强烈的波动特征;列车裙板和车底的表面压力整体上均呈先减后增、最后维持在较高幅值波动的趋势,对列车相关结构的疲劳强度产生不利影响。     

A maritime safety on-board decision support system to enhance emergency evacuation on ferryboats

Planning emergency evacuation operations in a proactive manner in public marine transportation systems is a critical success factor for passenger and crew safety. Despite the fact that there is a growing attention on safety issues for marine transportation systems, providing a real-time decision support for evacuation planning under different emergency conditions has not yet been addressed. In this context, this paper contributes to the related literature by providing a comprehensive methodology including simulation and statistical analysis along with a three-module decision support system (DSS) for ferryboat emergency evacuation. Emergency evacuation and fire environment are simulated via Maritime EXODUS V5.1 and SMARTFIRE V4.3, respectively. The methodology is applied to a real-life Ro-Ro ferry, and the results not only revealed significant factors on emergency evacuation performance, but also demonstrated the validity of the developed decision support system.     

复杂水域船舶进出港全过程仿真建模方法

本文对比分析了国内外应用各种建模方法在船舶通航研究中的优缺点,提出了一种基于多智能体信息交互的港口运营系统仿真建模方法,旨在拟实反映复杂水域船舶进出港的全过程。结合多智能体系统仿真理论、离散事件仿真理论与多元数据统计分析方法,实现了对复杂水域船舶进出港全年全过程的精细化仿真,并系统总结了可通过建模解决的关键研究问题。     

Simulation-based severe weather-induced container terminal economic loss estimation

Container terminals play a critical role in maritime supply chains. However, they show vulnerabilities to severe weather events due to the sea–land interface locations. Previous severe weather risk analysis focused more on larger assessment units, such as regions and cities. Limited studies assessed severe weather risks on a smaller scale of seaports. This paper aims to propose a severe weather-induced container terminal loss estimation framework. Based on a container terminal operation simulation model, monthly average loss and single event-induced loss are obtained by using historical hazard records and terminal operation records as model inputs. By studying the Port of Shenzhen as the case study, we find that the fog events in March lead to the longest monthly port downtime and the highest monthly severe weather-induced economic losses in the studied port. The monthly average loss is estimated to be 30 million USD, accounting for 20% of the intact income. The worst-case scenario is found to be a red-signal typhoon attack which results in nearly 20% decrease in the month’s income. The results provide useful references for various container terminal stakeholders in severe weather risk management.     

Pragmatic regularization of element-dependent effects in finite element simulations of ductile tensile failure initiation using fine meshes

For the evaluation of the structural response in accidental scenarios like ship collisions, the simulation of tensile failure initiation is inevitable. Here, one difficulty is that the process of failure initiation is a very local process, which cannot be simulated in its details at present due to the computing effort which would be required. However, there are various approaches how the failure initiation can be simplified and simulated in finite element models of large thin-walled structures. A short overview of these approaches is given. A pragmatic approach, which is suitable for relatively small elements for the simulation of failure initiation in uniaxial to biaxial stress states, is chosen within this paper for further investigations regarding the applicability for thin-walled steel structures. Exemplary simulations with solid and, in particular, shell elements are used to demonstrate how the effects of element size and other element properties can be considered in the simulation of failure initiation. The focus is also on imperfections that are relevant in simulations with small elements. For this purpose, an indentation experiment is simulated with different imperfections.     

季节性冻土地区铁路路基冻结深度变化规律研究

对哈齐(哈尔滨—齐齐哈尔)客运专线DK221+150断面温度场进行实测,并对该断面温度场进行了二维有限元分析,研究季节性冻土地区铁路路基冻结深度变化规律及其影响因素,并拟合出冻结深度与热通量及持续冻结时间的函数关系。结果表明:该地区铁路路基最大冻结深度约0.3 m;路基冻结深度主要取决于浅层土体的热通量及持续冻结时间;当表层热通量降低至某一临界值后,土体冻结深度不再发展,冻土厚度开始逐步减少;冻结深度与热通量、持续冻结时间呈线性关系,随着冻结状态时间的延长,热通量的敏感性下降,持续冻结时间敏感性上升。