铁路站场BIM技术应用研究

BIM技术应用是一次设计手段的变革,站场专业是铁路工程中的龙头专业,是BIM技术应用的重点专业,站场设计的效率和质量对整个铁路的建设和运营具有极其重要的影响。论述站场专业BIM技术应用现状。以站场专业利用BIM技术作为设计手段为目的,从设计软件、标准、基础数据和交付平台等方面对站场专业BIM技术应用提出解决对策;提出站场BIM设计软件研发的两种方法。以铁路工程信息模型分类和编码标准为基础对站场IFD标准进行扩充和完善,以站场和航测专业的数据接口为例对站场设计从二维到三维转变时的接口数据适应性调整进行说明。通过对站场设备添加可定位的身份编码,在自主研发的BIM综合管理平台上构建铁路站场专业三维信息模型组织结构树。     

Strain estimation for offshore wind turbines with jacket substructures using dual-band modal expansion

Structural fatigue is a design driver for offshore wind turbines (OWT). In particular, the substructures, like jackets, are strongly affected by fatigue. Monitoring the fatigue progression in the welds is vital for the maintenance and a potential lifetime extension. However, inspections of critical locations are costly due to the limited accessibility of the mostly submerged jacket. Considering the high number of potentially critical welds, it is regarded as economically unfeasible to equip all fatigue hot spots with sensors. Thus, an indirect method to monitor the fatigue progress of the structure and point out critical locations is desirable. For a consistent support of ongoing maintenance, it has to yield reliable results for varying operational and environmental conditions. This paper applies a virtual sensing approach to jacket substructures. From a small set of sensors on the tower, fatigue at every desired location of the jacket is estimated using dual-band modal expansion. Simulations using the OC4 jacket design are performed to show potentials and limitations of the method. Namely fatigue progress on leg welds of K-joints is predicted with high accuracy over a wide range of load cases. However, some difficulties in fatigue prediction of X-joints due to the occurrence of local modes and limitations in the extrapolation of wave loading have to be resolved in future work.     

接触网参数对接触网风致响应的影响及风洞试验验证

大风作用会使接触网发生更大更复杂的振动与风偏,为给大风区接触网的防风设计提供科学依据,采用有限元计算与风洞试验相结合的方法进行研究。利用ANSYS软件建立包括支撑结构和悬挂部分的有限元耦合模型;采用谐波合成法(WAWS)模拟针对接触网结构特点的脉动风场;通过计算不同接触网参数组合方案在风荷载下的风致响应位移,定量分析得出悬挂类型、张力组合、跨距对接触网风致响应的影响。接触网气动弹性风洞试验结果表明,接触网参数对风致响应的影响的研究结果正确。研究成果应用于兰新铁路第二双线大风区接触网系统方案设计和技术参数选择,并作为主要理论支撑之一,形成了首个国内外铁路电化行业的风区接触网装备技术条件。     

地铁屏蔽门便携测试仪实现方案初探

通过分析西门子屏蔽门控制子系统工作原理和控制信号波形,探讨采用TMS320DM6437数字信号处理器和高速ADC/DAC实现地铁屏蔽门便携测试仪的实现方案。     

A two-dimensional response to a tropical storm on the Gulf of Mexico shelf

Surface current data from drifting buoys and remotely sensed wind data recorded over the continental shelf in the northeastern Gulf of Mexico during the passage of tropical storm Josephine in October 1996 are examined. Drifter data show the existence of a strong surface jet (velocities reaching 1 m s⁻¹) that moves up the west Florida shelf and westward along the Louisiana–Texas shelf, and lasts for nearly 1 week. The coastal jet occurs during an intense synoptic scale wind event where wind speeds reach 15 m s⁻¹. A simple force balance and statistical analysis are performed to assess the role of strong wind forcing. The primary balance shows an Ekman-type current. The role of local acceleration is greatest when winds are directed along bathymetry. A simple two-dimensional strongly forced shelf response model developed from the linear steady-state momentum equations also indicates larger along-shore currents due to both Ekman-type forcing by cross-shore winds and a cross-shore pressure gradient arising from conservation of mass. Model parameters fit empirically are within 15% of theoretical values. The simple model explains 30% and 46% of the variance in the observed along-shore and cross-shore surface currents, respectively.     

Corrosion fatigue load frequency sensitivity analysis

This paper presents experimental assessment of crack growth rates of S355J2+N steel in a corrosion fatigue environment similar to what is experienced on offshore wind farm monopile structures under various cyclic load frequencies in order to assess the effect of cyclic frequency of the applied loading within a frequency range pertinent to the structure. Fatigue crack propagation behaviour in this test programme is evaluated through fatigue tests on six compact tension test specimens in air and in laboratory simulated seawater under free corrosion condition. Fatigue crack lengths were monitored by back face strain (BFS), DCPD and ACPD. A regression model was derived through the BFS method to express strain values as a function of crack length to width ratio. The effectiveness of BFS method is particularly demonstrated in the simulated marine environment. Within the range of test frequencies, crack growth rates in simulated seawater when compared to the equivalent air test revealed environmental reduction factors of 2 and 4 at lower and higher values of stress intensity factors respectively. Significant difference in the results of the seawater test frequencies is discussed.     

Crack growth direction effects on corrosion-fatigue behaviour of offshore wind turbine steel weldments

In this study corrosion-fatigue tests have been conducted on fracture mechanics specimens extracted from an S355 G10+M structural steel welded plate. The tests have been performed on compact tension specimens with the crack tip located in the heat affected zone. The corrosion-fatigue test results from this study have been compared with the data available on the base metal as well as air tests on the same material. Moreover, the obtained results have been compared with the corrosion-fatigue data available in the literature on a wide range of steels and also the fatigue trends for welded joints in free-corrosion condition recommended in the BS7910 Standard. The effect of the specimen orientation, with respect to the weld region, is also examined in this study and it has been found that higher corrosion-fatigue crack growth rates are generally observed in the tests with 0° orientation. The results have also shown that the corrosive environment has significant effects on the fatigue crack growth acceleration at the beginning of the tests; however, as the crack propagates, the environmental damage effect on crack growth behaviour becomes less pronounced. The results presented in this study are discussed in terms of improvement in the structural integrity assessment of offshore wind turbine monopiles.     

基于站群控制的城市轨道交通站台紧急停车系统

针对我国城市轨道交通运营的特点,基于站群控制的管理理念,重新对城市轨道交通站台紧急停车系统进行方案设计。以一个卫星站和一个轴心站为例,把站群管理模式应用到了站台紧急停车系统中,减少了卫星站信号系统工作人员配置数量,提高了站台区运营管理效率,对今后国内城市轨道交通工程项目的建设和运营管理具有指导和参考意义。     

深水半潜式钻井平台总体强度分析及冰载荷下结构评估

本文主要概述了某深水半潜式钻井平台的特点,按照DNV的相关规范,采用了有限元法和设计波法,建立了总体有限元模型,分析了在风暴自存工况下的总体屈服强度和屈曲强度,并进行了冰载荷作用下的结构评估。可得到结论,总体屈服强度和屈曲强度是满足的。本文可以为以后同类平台的总体强度分析提供借鉴。     

海上风电安装技术及装备发展现状分析

我国海上风能资源丰富,发展潜力巨大。文章总结分析了海上风电安装特点及存在问题;探讨了国内外现有风电安装船(或平台)类型、主要机具、关键结构及技术;并进一步提出了海上风电安装技术及设备发展趋势,为我国海上风电安装技术和装备发展提供借鉴和建议。