基于Vissim交通仿真的农村公路线形设计安全性评价分析

农村公路是农村经济发展、人民生活条件改善的重要基础条件,同时其在加强城乡联系、调整农业结构、促进农村土地资源开发等方面发挥了重要作用。但是在农村公路深人发展的同时,其交通安全问题严重影响并制约着农村公路的发展态势。通过研究农村公路线形与交通安全关系,运用交通仿真软件对农村公路线形设计进行了安全性评价,并针对其安全问题提出交通安全保障的主要技术手段。     

悬浮隧道整体冲击响应模拟方法及试验验证

为研究水下悬浮隧道管体在冲击荷载下的整体动力响应,提出对应的简化模拟方法,在有限元软件ABAQUS中结合自定义幅值（UAMP）子程序进行了冲击荷载作用下考虑流体作用的悬浮隧道整体响应分析。基于Morison方程,将流体作用分为非线性阻力和附加质量力。首先,以分段线荷载的形式表示流体阻力沿管体纵向的不均匀分布。在UAMP子程序中采用FORTRAN语言编写与管体运动速度相关的流体阻力幅值计算程序。通过在ABAQUS与UAMP子程序之间管体运动速度和流体阻力幅值的交互传递,实现了荷载大小同时随时间和空间变化的非线性流体阻力加载。其次,考虑与管体加速度相关的流体附加质量力,其幅值在ABAQUS中通过定义浸没式截面自动计算。最后,进行悬浮隧道整体模型冲击试验,采用提出的模拟方法对试验典型工况进行分析,并将计算结果与试验实测值进行对比。结果表明：提出的建模方法能较好反映悬浮隧道结构动力特性;随着冲击强度的增大,冲击点处管体最大位移和加速度增大,且峰值均出现在第1个运动周期内;采用简化模拟方法分析所得的管体位移和加速度响应与试验结果基本一致;该模拟方法的计算精度与流体阻力分段线荷载的分段长度有关,当分段长度小于管体总长的1/20时,分析结果趋于稳定。因此,基于UAMP子程序的流体作用的简化数值模拟方法能较好地用于悬浮隧道整体冲击响应分析,误差在工程允许范围内。     

施工过程分析在ANSYS中的实现

在结构施工过程中,结构受力体系、边界约束条件、荷载分布在不断的改变。利用大型有限元软件ANSYS的“生死单元”,可以进行结构施工过程分析。主要介绍了“生死单元”的机理,并举例分析了仅与“杀死单元”相连接的节点的约束问题,使其能较好的模拟结构施工过程。     

Simulating ad-hoc demand-responsive transportation: a comparison of three approaches

Transport models are used to evaluate new infrastructure and public transport services, varied levels of demand, and new ideas for demand management. Exploring these proposals virtually is easier than implementation and testing in situ. However, existing models are based around traditional forms of transportation. As part of a feature analysis using a case study approach, three different simulation packages (a simple custom-developed package, traffic microsimulation, and agent-based simulation) are used to develop and demonstrate simulations of demand-responsive transportation (DRT) and analyze the advantages and disadvantages of each simulation approach for evaluating DRT. While the simulations display some relational replication (meaning they produce similar relational patterns with respect to certain variables), they do not show distributional replication (that is, the value of the results is not statistically similar), meaning that under- or over-estimation of predicted travel could occur. Recommendations for the application of each modeling approach are made.     

利用SPS模拟川气东送管道压气站失效问题

为研究压气站失效与单台机组失效对输气管道的影响程度,采用SPS软件对压气站失效和单台机组失效进行了详细模拟。模拟结果显示:压气站失效与单台机组失效相比对管输系统影响较大;对于压气站失效,越靠近末站的压气站失效对管输系统影响越大;对于单台机组失效,越靠近首站的压缩机失效对管输系统影响越大。分析结果可为事故状态下的供气和抢修提供参考。     

舰艇仿真训练系统开发中三维旋转效果的二维实现

在开发舰艇仿真训练系统中,为提高操作界面的逼真程度,经常要求实现元件的三维旋转效果。文章介绍了传统的二维坐标换算和旋转三维模型方法的局限和缺点,提出了通过替换页面关系和循环引擎,在二维开发环境中实现三维旋转的效果。此方法简化了程序流程,缩短了开发周期,在舰艇模拟仿真训练系统开发过程中有着良好的表现和广泛的应用趋势。     

舰载机箱的磁场屏蔽特性仿真

以往针对机箱电场屏蔽特性的研究较多,而对其磁场屏蔽特性的研究较少。然而,电场和磁场的屏蔽特性并不完全一样。因此,针对舰载机箱所受到的电磁辐射和干扰的威胁特征,基于有限积分技术对典型舰载机箱结构开展了磁场屏蔽特性仿真研究。获取了重要的机箱内部磁场屏蔽效能、箱内磁场分布和电流分布等仿真结果。而且屏蔽效能的仿真结果与IEEE文献中测试与计算结果吻合得很好,充分验证了仿真的有效性。最后,对磁场屏蔽效能、内场分布和表面电流分布进行了分析。特别是对机箱非正面的电流分布给出了合理解释,主要原因是与入射场的极化相关。研究成果对机箱的电磁防护设计提供了有力的技术支撑。     

Numerical Simulation of Advanced Geological Forecasting Based on Multi- Source Seismic Interferometry北大核心CSCD

For existing advanced geological forecasting, the forecast distance is short and the test frequency is high, increasing test and construction risks. Since various methods have different requirements for the test environ-ment, preparation work can be tedious and result in a long construction time thereby affecting normal construction.A new advanced geological forecast technique based on multi-source seismic interferometry for tunnels is proposed.This technique uses the blast at one end of tunnel as a centrum and receives the signal at the other end of the tun-nel, therefore allowing advanced geological forecasting of the unexcavated tunnel part by relative processing and im-aging. A numerical simulation of this kind of geological forecasting using the finite difference method to simulate two kinds of unfavorable geological bodies (karst and a fault) predicted them accurately and verified the effective-ness and accuracy of this geological forecasting method. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Effect of Explosion in a Gas Pipeline Compartment of a Utility Tunnel on Neighboring Metro Tunnels北大核心CSCD

In this paper the numerical simulation analysis of the effect of explosion in the gas pipeline compartment of a utility tunnel on neighboring metro tunnels was conducted using the software AUTODYN. The results show that the TNT equivalent in a fireproof partition with length of 200 m is 41.6 kg when the gas concentration in the gas pipeline compartment reaches 10%; the blast wave has much effect on the crown and arch waist of the round metro tunnel and it’s necessary to take some protective measures in both areas; when the surrounding soil is sand, the utili- ty tunnel is above the round metro tunnel and their alignments are in the same direction, the greater the vertical spacing between the utility tunnel and the metro tunnel, the smaller the effect of the blast wave on the metro tunnel; when the vertical spacing is 7.2 m, the maximum dynamic tensile stress is 1.86 MPa (including the static stress value of 1 MPa in the tunnel segment) and it is slightly smaller than the designed tensile strength of metro tunnel (about 1.89 MPa). The maximum vibration velocity and the maximum displacement meet the structural stability require- ments, so it is suggested the vertical spacing between the utility tunnel and metro tunnel shall not be less than 7.2 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.